{
"": "",
"\n It looks like your session has been inactive for more than {lifetime} seconds.<br>\n For security reasons we will log you out at {time}.\n ": "",
" Est. Usable Raw Capacity": "",
" Please click the button below to add {item}.": "",
" When the <b>UPS Mode</b> is set to <i>slave</i>. Enter the open network port number of the UPS <i>Master</i> system. The default port is <i>3493</i>.": "",
" as of {dateTime}": "",
" bytes.": "",
" cores at ": "",
" seconds.": "",
" threads at ": "",
"% of all cores": "",
"'Hosts Allow' or 'Hosts Deny' has been set": "",
"'Hosts Allow' or 'Hosts Deny' has been updated": "",
"(24 Hours)": "",
"(Examples: 500 KiB, 500M, 2 TB)": "",
"(No description)": "",
"(Optional)": "",
"(Remove pool from database)": "",
"(This Controller)": "",
"(TrueNAS Controller 1)": "",
"(TrueNAS Controller 2)": "",
"+ Add a backup credential": "",
", ": "",
"...": "",
"... Make sure the TrueNAS system is powered on and connected to the network.": "",
"0=Disabled, blank=inherit": "",
"1 day": "",
"1 hour": "",
"1 month": "",
"1 week": "",
"2 days ago": "",
"2 months ago": "",
"2 weeks ago": "",
"20 characters is the maximum length.": "",
"2FA has been configured for this account. Enter the OTP to continue.": "",
"3 days ago": "",
"3 months ago": "",
"3 weeks ago": "",
"4 days ago": "",
"4 months ago": "",
"5 days ago": "",
"5 months ago": "",
"6 months": "",
"6 months ago": "",
"<a href=\"https://docs.aws.amazon.com/general/latest/gr/rande-manage.html\" target=\"_blank\">AWS resources in a geographic area</a>. Leave empty to automatically detect the correct public region for the bucket. Entering a private region name allows interacting with Amazon buckets created in that region. For example, enter <i>us-gov-east-1</i> to discover buckets created in the eastern <a href=\"https://docs.aws.amazon.com/govcloud-us/latest/UserGuide/whatis.html\" target=\"_blank\">AWS GovCloud</a> region.": "",
"<a href=\"https://docs.microsoft.com/en-us/azure/storage/common/storage-create-storage-account\" target=\"_blank\">Microsoft Azure</a> account name.": "",
"<a href=\"https://docs.pcloud.com/methods/intro/authentication.html\" target=\"_blank\">pCloud Access Token</a>. These tokens can expire and require extension.": "",
"<a href=\"https://en.wikipedia.org/wiki/Authentication_protocol\" target=\"_blank\">Authentication protocol</a> used to authenticate messages sent on behalf of the specified <i>Username</i>.": "",
"<a href=\"https://en.wikipedia.org/wiki/Cryptographic_protocol\" target=\"_blank\">Encryption protocol</a> used to encrypt messages sent on behalf of the specified <i>Username</i>.": "",
"<a href=\"https://en.wikipedia.org/wiki/Extended_file_attributes\" target=\"_blank\">Extended attributes</a> are preserved, but must be supported by both systems.": "",
"<a href=\"https://mega.nz/\" target=\"_blank\">MEGA</a> account password.": "",
"<a href=\"https://mega.nz/\" target=\"_blank\">MEGA</a> account username.": "",
"<a href=\"https://tools.ietf.org/html/rfc8095\" target=\"_blank\">Transport Protocol</a> for the remote system log server connection. Choosing Transport Layer Security (TLS) also requires selecting a preconfigured system Certificate.": "",
"<a href=\"https://www.backblaze.com/docs/cloud-storage-application-keys?highlight=application%20key\" target=\"_blank\">Backblaze B2</a> Application Key. To generate a new application key, log in to the Backblaze account, go to the <i>App Keys</i> page, and add a new application key. Copy the <i>applicationKey</i> string to this field.": "",
"<a href=\"https://www.fastmail.com/help/technical/ssltlsstarttls.html\" target=\"_blank\">Email encryption</a> type. Choices are <i>Plain (No Encryption)</i>, <i>SSL (Implicit TLS)</i>, or <i>TLS (STARTTLS)</i>.": "",
"<a href=\"https://www.ixsystems.com/community/\" target=\"_blank\"> TrueNAS Forums</a> - Find answers from other users in the forums.": "",
"<a href=\"https://www.ixsystems.com/support/truenas-arrays/\" target=\"_blank\"> TrueNAS Licensing</a> - Learn more about enterprise-grade support.": "",
"<a href=\"https://www.truenas.com/docs/hub/\" target=\"_blank\"> TrueNAS Documentation Hub</a> - Read and contribute to the open-source documentation.": "",
"<b>COPY</b>: Files from the source are <i><u>copied</u></i> to the destination. If files with the same names are present on the destination, they are <i><u>overwritten</u></i>.": "",
"<b>Copy & Paste</b> <br/>\n Context menu copy and paste operations are disabled in the Shell. Copy and paste shortcuts for Mac are <i>Command+C</i> and <i>Command+V</i>. For most operating systems, use <i>Ctrl+Insert</i> to copy and <i>Shift+Insert</i> to paste.<br/><br/>\n <b>Kill Process</b> <br/>\n Kill process shortcut is <i>Ctrl+C</i>.": "",
"<b>MOVE</b>: After files are <i><u>copied</u></i> from the source to the destination, they are <i><u>deleted</u></i> from the source. Files with the same names on the destination are <i><u>overwritten</u></i>.": "",
"<b>Not recommended.</b> Allow more than one group to have the same group ID.": "",
"<b>SET</b> will changes all destination datasets to <code>readonly=on</code> after finishing the replication. <br><b>REQUIRE</b> stops replication unless all existing destination datasets to have the property <code>readonly=on</code>. <br><b>IGNORE</b> disables checking the <code>readonly</code> property during replication.": "",
"<b>SYNC</b>: Files on the destination are <i><u>changed</u></i> to match those on the source. If a file does not exist on the source, it is also <i><u>deleted</u></i> from the destination.": "",
"<b>WARNING:</b> Rolling the dataset back destroys data on the dataset <i>and</i> can destroy additional snapshots that are related to the dataset. <b>This can result in permanent data loss!</b> Do not roll back until all desired data and snapshots are backed up.": "",
"<b>WARNING:</b> The configuration file contains sensitive data like system passwords. However, SSH keys that are stored in <samp>/root/.ssh</samp> are <b>NOT</b> backed up by this operation. Additional sensitive information can be included in the configuration file.<br />": "",
"<em>Warning:</em> The WireGuard service must be active on the client system to access the TrueCommand UI.": "",
"<i>0</i> disables quotas. Specify a maximum allowed space for this dataset.": "",
"<i>0</i> is unlimited. A specified value applies to both this dataset and any child datasets.": "",
"<i>0</i> is unlimited. Reserve additional space for datasets containing logs which could take up all available free space.": "",
"<i>AHCI</i> emulates an AHCI hard disk for best software compatibility. <i>VirtIO</i> uses paravirtualized drivers and can provide better performance, but requires the operating system installed in the VM to support VirtIO disk devices.": "",
"<i>AHCI</i> emulates an AHCI hard disk for better software compatibility. <i>VirtIO</i> uses paravirtualized drivers and can provide better performance, but requires the operating system installed in the VM to support VirtIO disk devices.": "",
"<i>Certificate Signing Requests</i> control when an external CA will issue (sign) the certificate. Typically used with ACME or other CAs that most popular browsers trust by default <i>Import Certificate Signing Request</i> lets you import an existing CSR onto the system. Typically used with ACME or internal CAs.": "",
"<i>Device</i> provides virtual storage access to zvols, zvol snapshots, or physical devices. <i>File</i> provides virtual storage access to a single file.": "",
"<i>Intel e82545 (e1000)</i> emulates the same Intel Ethernet card. This provides compatibility with most operating systems. <i>VirtIO</i> provides better performance when the operating system installed in the VM supports VirtIO paravirtualized network drivers.": "",
"<i>Internal Certificates</i> use system-managed CAs for certificate issuance. <i>Import Certificate</i> lets you import an existing certificate onto the system.": "",
"<i>PUSH</i> sends data to cloud storage. <i>PULL</i> receives data from cloud storage. Changing the direction resets the <i>Transfer Mode</i> to COPY.": "",
"<i>PUSH</i> sends snapshots to a destination system.<br><br> <i>PULL</i> connects to a remote system and retrieves snapshots matching a <b>Naming Schema</b>.": "",
"<i>Quick</i> erases only the partitioning information on a disk without clearing other old data. <i>Full with zeros</i> overwrites the entire disk with zeros. <i>Full with random data</i> overwrites the entire disk with random binary data.": "",
"<i>Sensitive</i> assumes filenames are case sensitive. <i>Insensitive</i> assumes filenames are not case sensitive.": "",
"<i>Standard</i> uses the sync settings that have been requested by the client software, <i>Always</i> waits for data writes to complete, and <i>Disabled</i> never waits for writes to complete.": "",
"<i>Yes:</i> Disables the <b>Password</b> fields and removes the password from the account. The account cannot use password-based logins for services. For example, disabling the password prevents using account credentials to log in to an SMB share or open an SSH session on the system. The <b>Lock User</b> and <b>Permit Sudo</b> options are also removed.<br><br> <i>No:</i> Requires adding a <b>Password</b> to the account. The account can use the saved <b>Password</b> to authenticate with password-based services.": "",
"<i>global</i> is a reserved name that cannot be used as a share name. Please enter a different share name.": "",
"<i>{disk}</i> has been detached.": "",
"<p>Currently following GPU(s) have been isolated:<ol>{gpus}</ol></p>": "",
"<p>Including the Password Secret Seed allows using this configuration file with a new boot device. This also decrypts all system passwords for reuse when the configuration file is uploaded.</p> <br /><b>Keep the configuration file safe and protect it from unauthorized access!</b>": "",
"<p>The system will reboot to perform this operation!</p> <p><font color=\"red\">All passwords are reset when the uploaded configuration database file was saved without the Password Secret Seed. </font></p>": "",
"<strong>Dataset:</strong> ": "",
"A message with verification instructions has been sent to the new email address. Please verify the email address before continuing.": "",
"A smaller block size can reduce sequential I/O performance and space efficiency.": "",
"A stripe log VDEV may result in data loss if it fails combined with a power outage.": "",
"A stripe {vdevType} VDEV is highly discouraged and will result in data loss if it fails": "",
"A system update is in progress. It might have been launched in another window or by an external source like TrueCommand.": "",
"A unique name to identify this keypair. Automatically generated keypairs are named after the object that generated the keypair with \" Key\" appended to the name.": "",
"A username on the FTP Host system. This user must already exist on the FTP Host.": "",
"ACL Editor": "",
"ACL Entries": "",
"ACL Mode": "",
"ACL Type": "",
"ACL Types & ACL Modes": "",
"ACME DNS-Authenticators": "",
"ACME Server Directory URI": "",
"AD Timeout": "",
"ALERT": "",
"ALL Initiators Allowed": "",
"API Docs": "",
"API Key": "",
"API Key Actions": "",
"API Key or Password": "",
"API Key:": "",
"API Keys": "",
"ARN": "",
"ATA Security User": "",
"AVAILABLE": "",
"AWS Region": "",
"Abort": "",
"About": "",
"Access": "",
"Access Based Share Enumeration": "",
"Access Control Entry": "",
"Access Control Entry (ACE) user or group. Select a specific <i>User</i> or <i>Group</i> for this entry, <i>owner@</i> to apply this entry to the user that owns the dataset, <i>group@</i> to apply this entry to the group that owns the dataset, or <i>everyone@</i> to apply this entry to all users and groups. See <a href=\"https://man7.org/linux/man-pages/man1/nfs4_setfacl.1.html\" target=\"_blank\">nfs4_setfacl(1) NFSv4 ACL ENTRIES</a>.": "",
"Access Control List": "",
"Access Key ID": "",
"Access Key ID for the linked AWS account.": "",
"Access Mode": "",
"Access Settings": "",
"Access Token": "",
"Access Token <a href=\"https://api.hubic.com/sandbox/\" target=\"_blank\">generated by a Hubic account</a>.": "",
"Access Token for a Dropbox account. A <a href=\"https://blogs.dropbox.com/developers/2014/05/generate-an-access-token-for-your-own-account/\" target=\"_blank\">token must be generated</a> by the <a href=\"https://www.dropbox.com/\" target=\"_blank\">Dropbox account</a> before adding it here.": "",
"Access checks should use bucket-level IAM policies.": "",
"Access denied to {method}": "",
"Access from your IP is restricted": "",
"Access restricted": "",
"Account Key": "",
"Account Name": "",
"Account Read": "",
"Account Write": "",
"Account to be used for guest access. Default is <i>nobody</i>. The chosen account is required to have permissions to the shared pool or dataset. To adjust permissions, edit the dataset Access Control List (ACL), add a new entry for the chosen guest account, and configure the permissions in that entry. If the selected <i>Guest Account</i> is deleted the field resets to <i>nobody</i>.": "",
"Account: {account}": "",
"Ace has errors.": "",
"Action Not Possible": "",
"Actionable Options": "",
"Actions": "",
"Activate": "",
"Activate KMIP configuration and begin syncing keys with the KMIP server.": "",
"Activate the Basic Constraints extension to identify whether the certificate's subject is a CA and the maximum depth of valid certification paths that include this certificate.": "",
"Activate this Boot Environment?": "",
"Activate this certificate extension. The key usage extension defines the purpose (e.g., encipherment, signature, certificate signing) of the key contained in the certificate. The usage restriction might be employed when a key that could be used for more than one operation is to be restricted. For example, when an RSA key should be used only to verify signatures on objects other than public key certificates and CRLs, the <i>Digital Signature</i> bits would be asserted. Likewise, when an RSA key should be used only for key management, the <i>Key Encipherment</i> bit would be asserted. <br> See <a href=\"https://www.ietf.org/rfc/rfc3280.txt\">RFC 3280, section 4.2.1.3</a> for more information.": "",
"Activate this certificate extension.The Extended Key Usage extension identifies and limits valid uses for this certificate, such as client authentication or server authentication.See <a href=\"https://www.ietf.org/rfc/rfc3280.txt\" target=\"_blank\">RFC 3280, section 4.2.1.13</a> for more details.": "",
"Activate this extension. The authority key identifier extension provides a means of identifying the public key corresponding to the private key used to sign a certificate. This extension is used where an issuer has multiple signing keys (either due to multiple concurrent key pairs or due to changeover). The identification MAY be based on either the key identifier (the subject key identifier in the issuer's certificate) or on the issuer name and serial number.<br> See <a href=\"https://www.ietf.org/rfc/rfc3280.txt\">RFC 3280, section 4.2.1.1</a> for more information.": "",
"Activates a tuning script which attempts to optimize the system depending on the installed hardware. <b>Warning:</b> Autotuning is only used as a temporary measure and is not a permanent fix for system hardware issues.": "",
"Activates the configuration. Unset to disable the configuration without deleting it.": "",
"Activates the replication schedule.": "",
"Active": "",
"Active Directory": "",
"Active Directory - Primary Domain": "",
"Active Directory and LDAP are disabled.": "",
"Active Directory is disabled.": "",
"Active Directory must be enabled before adding new domains.": "",
"Active IP Addresses": "",
"Active Sessions": "",
"Active {controller}.": "",
"Active: TrueNAS Controller {id}": "",
"Adapter Type": "",
"Add": "",
"Add ": "",
"Add API Key": "",
"Add Alert Service": "",
"Add Allowed Initiators (IQN)": "",
"Add Associated Target": "",
"Add Authorized Access": "",
"Add CSR": "",
"Add Catalog": "",
"Add Certificate": "",
"Add Certificate Authority": "",
"Add Cloud Sync Task": "",
"Add Cron Job": "",
"Add DNS Authenticator": "",
"Add Dataset": "",
"Add Device": "",
"Add Disks": "",
"Add Disks To:": "",
"Add Extent": "",
"Add External Interfaces": "",
"Add Group": "",
"Add Group Quotas": "",
"Add ISCSI Target": "",
"Add Idmap": "",
"Add Init/Shutdown Script": "",
"Add Initiator": "",
"Add Interface": "",
"Add Item": "",
"Add Kerberos Keytab": "",
"Add Kerberos Realm": "",
"Add Kerberos SPN Entry": "",
"Add License": "",
"Add NFS Share": "",
"Add NTP Server": "",
"Add Periodic Snapshot Task": "",
"Add Portal": "",
"Add Replication Task": "",
"Add Reporting Exporter": "",
"Add Rsync Task": "",
"Add S.M.A.R.T. Test": "",
"Add SMB": "",
"Add SMB Share": "",
"Add SPN": "",
"Add Scrub Task": "",
"Add Snapshot": "",
"Add Static Route": "",
"Add Sysctl": "",
"Add To Pool": "",
"Add To Trusted Store": "",
"Add User": "",
"Add User Quotas": "",
"Add VDEV": "",
"Add VM Snapshot": "",
"Add Vdevs to Pool": "",
"Add Windows (SMB) Share": "",
"Add Zvol": "",
"Add a new bucket to your Storj account.": "",
"Add any more <a href=\"https://man7.org/linux/man-pages/man5/sshd_config.5.html\" target=\"_blank\">sshd_config(5)</a> options not covered in this screen. Enter one option per line. These options are case-sensitive. Misspellings can prevent the SSH service from starting.": "",
"Add any notes about this zvol.": "",
"Add bucket": "",
"Add catalog to system even if some trains are unhealthy.": "",
"Add entry": "",
"Add groups": "",
"Add listen": "",
"Add new": "",
"Add the required no. of disks to get a vdev size estimate": "",
"Add this user to additional groups.": "",
"Added disks are erased, then the pool is extended onto the new disks with the chosen topology. Existing data on the pool is kept intact.": "",
"Adding data VDEVs of different types is not supported.": "",
"Additional <a href=\"https://www.smartmontools.org/browser/trunk/smartmontools/smartctl.8.in\" target=\"_blank\">smartctl(8)</a> options.": "",
"Additional Domains": "",
"Additional Domains:": "",
"Additional Hardware": "",
"Additional Kerberos application settings. See the \"appdefaults\" section of <a href=\"https://web.mit.edu/kerberos/krb5-1.12/doc/admin/conf_files/krb5_conf.html\" target=\"_blank\">[krb.conf(5)]</a>. for available settings and usage syntax.": "",
"Additional Kerberos library settings. See the \"libdefaults\" section of <a href=\"https://web.mit.edu/kerberos/krb5-1.12/doc/admin/conf_files/krb5_conf.html\" target=\"_blank\">[krb.conf(5)]</a>. for available settings and usage syntax.": "",
"Additional domains to search. Separate entries by pressing <code>Enter</code>. Adding search domains can cause slow DNS lookups.": "",
"Additional hosts to be appended to <i>/etc/hosts</i>. Separate entries by pressing <code>Enter</code>. Hosts defined here are still accessible by name even when DNS is not available. See <a href=\"https://man7.org/linux/man-pages/man5/hosts.5.html\" target=\"_blank\">hosts(5)</a> for additional information.": "",
"Additional options for <a href=\"https://arthurdejong.org/nss-pam-ldapd/nslcd.conf.5\" target=\"_blank\">nslcd.conf</a>.": "",
"Address": "",
"Addresses": "",
"Adjust Scrub/Resilver Priority": "",
"Adjust how often alert notifications are sent, use the Frequency drop-down. Setting the Frequency to NEVER prevents that alert from being added to alert notifications, but the alert can still show in the web interface if it is triggered.": "",
"Admin Password": "",
"Admin Server": "",
"Admin Servers": "",
"Admin Username": "",
"Administrative account name on the LDAP server. Example: <i>cn=Manager,dc=test,dc=org</i>.": "",
"Administrative user": "",
"Administrators Group": "",
"Adv. Power Management": "",
"Adv. Power Mgmt.": "",
"Advanced": "",
"Advanced Details": "",
"Advanced Mode": "",
"Advanced Options": "",
"Advanced Power Management": "",
"Advanced Remote Options": "",
"Advanced Replication Creation": "",
"Advanced Settings": "",
"Advanced Settings → Access": "",
"After entering the <b>Hostname, Username</b>, and <b>Password</b>, click <b>Fetch Datastores</b> and select the datastore to be synchronized.": "",
"Agree": "",
"Alert": "",
"Alert List Read": "",
"Alert Services": "",
"Alert Settings": "",
"Alert service saved": "",
"Alerts": "",
"Alerts could not be loaded": "",
"Algorithm": "",
"Alias for the identical interface on the other TrueNAS controller. The alias can be an IPv4 or IPv6 address.": "",
"Aliases": "",
"Aliases must be 15 characters or less.": "",
"All": "",
"All Cores": "",
"All Disks": "",
"All Threads": "",
"All data on that pool was destroyed.": "",
"All pools are online.": "",
"All selected directories must be at the same level i.e., must have the same parent directory.": "",
"All users": "",
"Allocate RAM for the VM. Minimum value is 256 MiB.": "",
"Allocate at least 256 MiB.": "",
"Allocate space for the new zvol.": "",
"Allow": "",
"Allow All": "",
"Allow All Initiators": "",
"Allow Anonymous Binding": "",
"Allow Anonymous Login": "",
"Allow Blocks Larger than 128KB": "",
"Allow Compressed WRITE Records": "",
"Allow DNS Updates": "",
"Allow Directory Service users to access WebUI": "",
"Allow Duplicate GIDs": "",
"Allow Guest Access": "",
"Allow Kerberos Authentication": "",
"Allow Local User Login": "",
"Allow Password Authentication": "",
"Allow Root Login": "",
"Allow Specific": "",
"Allow TCP Port Forwarding": "",
"Allow Taking Empty Snapshots": "",
"Allow Transfer Resumption": "",
"Allow Trusted Domains": "",
"Allow all initiators": "",
"Allow all sudo commands": "",
"Allow all sudo commands with no password": "",
"Allow anonymous FTP logins with access to the directory specified in <b>Path</b>.": "",
"Allow any local user to log in. By default, only members of the <i>ftp</i> group are allowed to log in.": "",
"Allow configuring a non-standard port to access the GUI over <i>HTTP</i>. Changing this setting might require changing a <a href=\"https://support.mozilla.org/en-US/kb/connection-settings-firefox\" target=\"_blank\">Firefox configuration setting</a>.": "",
"Allow configuring a non-standard port to access the GUI over <i>HTTPS</i>.": "",
"Allow different groups to be configured with different authentication profiles. Example: all users with a group ID of <i>1</i> will inherit the authentication profile associated with Group <i>1</i>.": "",
"Allow encrypted connections. Requires a certificate created or imported with the <b>System > Certificates</b> menu.": "",
"Allow files which return cannotDownloadAbusiveFile to be downloaded.": "",
"Allow group members to use <a href=\"https://man7.org/linux/man-pages/man8/sudo.8.html\" target=\"_blank\">sudo</a>. Group members are prompted for their password when using <b>sudo</b>.": "",
"Allow more ciphers for <a href=\"https://man7.org/linux/man-pages/man8/sshd.8.html\" target=\"_blank\">sshd(8)</a> in addition to the defaults in <a href=\"https://man7.org/linux/man-pages/man5/sshd_config.5.html\" target=\"_blank\">sshd_config(5)</a>. <code>None</code> allows unencrypted SSH connections and <code>AES128-CBC</code> allows the 128-bit <a href=\"https://nvlpubs.nist.gov/nistpubs/FIPS/NIST.FIPS.197.pdf\" target=\"_blank\">Advanced Encryption Standard</a>.<br><br> WARNING: these ciphers are considered security vulnerabilities and should only be allowed in a secure network environment.": "",
"Allow non-root mount": "",
"Allow non-unique serialed disks": "",
"Allow this replication to send large data blocks. The destination system must also support large blocks. This setting cannot be changed after it has been enabled and the replication task is created. For more details, see <a href=\"https://linux.die.net/man/8/zfs\" target=\"_blank\">zfs(8)</a>.": "",
"Allow using open file handles that can withstand short disconnections. Support for POSIX byte-range locks in Samba is also disabled. This option is not recommended when configuring multi-protocol or local access to files.": "",
"Allow {activities}": "",
"Allowed IP Addresses": "",
"Allowed IP address or hostname. One entry per field. Leave empty to allow everybody.": "",
"Allowed Initiators": "",
"Allowed Services": "",
"Allowed Sudo Commands": "",
"Allowed Sudo Commands (No Password)": "",
"Allowed addresses have been updated": "",
"Allowed characters: letters, numbers, underscore (_), and dash (-).": "",
"Allowed network in network/mask CIDR notation (example <i>1.2.3.4/24<i>). One entry per field. Leave empty to allow everybody.": "",
"Allowed sudo commands": "",
"Allowed sudo commands with no password": "",
"Allows multiple <a href=\"http://www.ntfs.com/ntfs-multiple.htm\">NTFS data streams</a>. Disabling this option causes MacOS to write streams to files on the filesystem.": "",
"Allows sudo commands": "",
"Alphanumeric <a href=\"https://www.backblaze.com/docs/cloud-storage-application-keys?highlight=application%20key\" target=\"_blank\">Backblaze B2</a> Application Key ID. To generate a new application key, log in to the Backblaze account, go to the <i>App Keys</i> page, and add a new application key. Copy the application <i>keyID</i> string to this field.": "",
"Also Include Naming Schema": "",
"Also include snapshots with the name": "",
"Also unlock any encrypted dataset stored within this dataset.": "",
"Alternative names that SMB clients can use when connecting to this NAS. Can be no greater than 15 characters.": "",
"Alternatively, you can start by configuring VDEVs in the wizard first and then opening Manual selection to make adjustments.": "",
"Always": "",
"Always Chroot": "",
"Always On": "",
"Amazon S3": "",
"Amazon Web Services Key ID. This is found on <a href=\"https://docs.aws.amazon.com/IAM/latest/UserGuide/id_credentials_access-keys.html\" target=\"_blank\">Amazon AWS</a> by going through <i>My account -> Security Credentials -> Access Keys (Access Key ID and Secret Access Key)</i>. Must be alphanumeric and between 5 and 20 characters.": "",
"Amazon Web Services password. If the Secret Access Key cannot be found or remembered, go to <i>My Account -> Security Credentials -> Access Keys</i> and create a new key pair. Must be alphanumeric and between 8 and 40 characters.": "",
"Amount of disk space that can be used by the selected groups. Entering <code>0</code> (zero) allows all disk space.": "",
"Amount of disk space that can be used by the selected users. Entering <code>0</code> (zero) allows all disk space to be used.": "",
"An ACL is detected on the selected path but <i>Enable ACL</i> is not selected for this share. ACLs must be stripped from the dataset prior to creating an SMB share.": "",
"An enclosure must be selected when 'Limit Pool to a Single Enclosure' is enabled.": "",
"An error occurred while sending the review. Please try again later.": "",
"An instance of this app already installed. Click the badge to see installed apps.": "",
"An update is already applied. Please reboot the system.": "",
"Anonymous User Download Bandwidth": "",
"Anonymous User Upload Bandwidth": "",
"Any notes about initiators.": "",
"Any system service can communicate externally.": "",
"App": "",
"App Name": "",
"App Version": "",
"Appdefaults Auxiliary Parameters": "",
"Append <i>@realm</i> to <i>cn</i> in LDAP queries for both groups and users when User CN is set).": "",
"Append Data": "",
"Appends a suffix to the share connection path. This is used to provide unique shares on a per-user, per-computer, or per-IP address basis. Suffixes can contain a macro. See the <a href=\"https://www.samba.org/samba/docs/current/man-html/smb.conf.5.html\" target=\"_blank\">smb.conf</a> manual page for a list of supported macros. The connectpath **must** be preset before a client connects.": "",
"Application": "",
"Application Info": "",
"Application Key": "",
"Application Metadata": "",
"Application Name": "",
"Applications": "",
"Applications allow you to extend the functionality of the TrueNAS server beyond traditional Network Attached Storage (NAS) workloads, and as such are not covered by iXsystems software support contracts unless explicitly stated. Defective or malicious applications can lead to data loss or exposure, as well possible disruptions of core NAS functionality.\n\n iXsystems makes no warranty of any kind as to the suitability or safety of using applications. Bug reports in which applications are accessing the same data and filesystem paths as core NAS sharing functionality may be closed without further investigation.": "",
"Applications are not running": "",
"Applications not configured": "",
"Applications you install will automatically appear here. Click below and browse available apps to get started.": "",
"Applications you install will automatically appear here. Click below and browse the TrueNAS catalog to get started.": "",
"Applied Dataset Quota": "",
"Apply Group": "",
"Apply Owner": "",
"Apply Pending Updates": "",
"Apply Pending update": "",
"Apply Quotas to Selected Groups": "",
"Apply Quotas to Selected Users": "",
"Apply To Groups": "",
"Apply To Users": "",
"Apply Update": "",
"Apply User": "",
"Apply permissions recursively": "",
"Apply permissions recursively to all child datasets of the current dataset.": "",
"Apply permissions recursively to all directories and files in the current dataset.": "",
"Apply permissions recursively to all directories and files within the current dataset.": "",
"Apply permissions to child datasets": "",
"Apply the same quota critical alert settings as the parent dataset.": "",
"Apply the same quota warning alert settings as the parent dataset.": "",
"Apply updates and reboot system after downloading.": "",
"Apps": "",
"Apps Read": "",
"Apps Service Not Configured": "",
"Apps Service Pending": "",
"Apps Service Running": "",
"Apps Service Stopped": "",
"Apps Write": "",
"Apr": "",
"Archive": "",
"Are you sure you want to abort the <b>{task}</b> task?": "",
"Are you sure you want to delete \"{cert}\"?": "",
"Are you sure you want to delete \"{name}\"?": "",
"Are you sure you want to delete <b>{name}</b> Reporting Exporter?": "",
"Are you sure you want to delete NFS Share <b>\"{path}\"</b>?": "",
"Are you sure you want to delete SMB Share <b>\"{name}\"</b>?": "",
"Are you sure you want to delete address {ip}?": "",
"Are you sure you want to delete catalog <b>\"{name}\"</b>?": "",
"Are you sure you want to delete cronjob <b>\"{name}\"</b>?": "",
"Are you sure you want to delete group <b>\"{name}\"</b>?": "",
"Are you sure you want to delete iSCSI Share <b>\"{name}\"</b>?": "",
"Are you sure you want to delete static route <b>\"{name}\"</b>?": "",
"Are you sure you want to delete the <b>{address}</b> NTP Server?": "",
"Are you sure you want to delete the <b>{name}</b> API Key?": "",
"Are you sure you want to delete the <b>{name}</b> DNS Authenticator?": "",
"Are you sure you want to delete the <b>{name}</b> SSH Connection?": "",
"Are you sure you want to delete the <b>{name}</b> certificate authority?": "",
"Are you sure you want to delete the <b>{name}</b>?": "",
"Are you sure you want to delete the group quota <b>{name}</b>?": "",
"Are you sure you want to delete the user quota <b>{name}</b>?": "",
"Are you sure you want to delete this item?": "",
"Are you sure you want to delete this record?": "",
"Are you sure you want to delete this script?": "",
"Are you sure you want to delete this snapshot?": "",
"Are you sure you want to delete this task?": "",
"Are you sure you want to delete user <b>\"{user}\"</b>?": "",
"Are you sure you want to deregister TrueCommand Cloud Service?": "",
"Are you sure you want to start over?": "",
"Are you sure you want to stop connecting to the TrueCommand Cloud Service?": "",
"Are you sure you want to sync from peer?": "",
"Are you sure you want to sync to peer?": "",
"Are you sure you want to terminate all other sessions?": "",
"Are you sure you want to terminate the session?": "",
"Are you sure?": "",
"Arguments": "",
"Associated Targets": "",
"Asymmetric Logical Unit Access (ALUA)": "",
"At least 1 GPU is required by the host for its functions.": "",
"At least 1 data VDEV is required.": "",
"At least 1 vdev is required to make an update to the pool.": "",
"At least one module must be defined in <a href=\"https://www.samba.org/ftp/rsync/rsyncd.conf.html\" target=\"_blank\">rsyncd.conf(5)</a> of the rsync server or in the <b>Rsync Modules</b> of another system.": "",
"At least one pod must be available": "",
"At least one pool must be available to use apps": "",
"At least one spare is recommended for dRAID. Spares cannot be added later.": "",
"Atleast {min} disk(s) are required for {vdevType} vdevs": "",
"Attach": "",
"Attach NIC": "",
"Attach additional images": "",
"Attach debug": "",
"Attach images (optional)": "",
"Attaches privileges to the group. Only needed if you need users in this group access to TrueNAS API or WebUI.": "",
"Attachments not uploaded": "",
"Attention": "",
"Audit": "",
"Audit ID": "",
"Audit Logging": "",
"Audit Logs": "",
"Aug": "",
"Auth Sessions Read": "",
"Auth Sessions Write": "",
"Auth Token": "",
"AuthVersion": "",
"Authentication": "",
"Authentication Group Number": "",
"Authentication Method": "",
"Authentication Method and Group": "",
"Authentication Protocol": "",
"Authentication Type": "",
"Authentication URL": "",
"Authenticator": "",
"Authenticator to validate the Domain. Choose a previously configured ACME DNS authenticator.": "",
"Authority Cert Issuer": "",
"Authority Key Config": "",
"Authority Key Identifier": "",
"Authorized Access": "",
"Authorized Hosts and IP addresses": "",
"Authorized Keys": "",
"Authorized Networks": "",
"Auto": "",
"Auto Refresh": "",
"Auto TRIM": "",
"Autoconfigure IPv6": "",
"Automated Disk Selection": "",
"Automatic update check failed. Please check system network settings.": "",
"Automatically populated with the original hostname of the system. This name is limited to 15 characters and cannot be the <b>Workgroup</b> name.": "",
"Automatically reboot the system after the update is applied.": "",
"Automatically sets number of threads used by the kernel NFS server.": "",
"Automatically stop the script or command after the specified seconds.": "",
"Autostart": "",
"Auxiliary Arguments": "",
"Auxiliary Groups": "",
"Auxiliary Parameters": "",
"Auxiliary Parameters (ups.conf)": "",
"Auxiliary Parameters (upsd.conf)": "",
"Available": "",
"Available Apps": "",
"Available Memory:": "",
"Available Resources": "",
"Available Space": "",
"Available Space Threshold (%)": "",
"Available version:\n": "",
"Average Disk Temperature": "",
"Avg Usage": "",
"Back": "",
"Back to Discover Page": "",
"Back to Support": "",
"Back up the encryption key now! If the key is lost, the data on the disks will also be lost with no hope of recovery. Click <b>Download Encryption Key</b> to begin the download. This type of encryption is for users storing sensitive data. iXsystems, Inc. cannot be held responsible for any lost or unrecoverable data as a consequence of using this feature.": "",
"Backblaze B2": "",
"Backend": "",
"Backend used to map Windows security identifiers (SIDs) to UNIX UIDs and GIDs. To configure the selected backend, click <i>EDIT IDMAP</i>.": "",
"Background (lowest)": "",
"Backup": "",
"Backup Credentials": "",
"Backup Tasks": "",
"Backup to Cloud or another TrueNAS via links below": "",
"Bandwidth": "",
"Bandwidth Limit": "",
"Base DN": "",
"Base Name": "",
"Base64 encoded key for the Azure account.": "",
"Basic": "",
"Basic Constraints": "",
"Basic Constraints Config": "",
"Basic Info": "",
"Basic Mode": "",
"Basic Options": "",
"Basic Settings": "",
"Batch Operations": "",
"Before updating, please read the release notes.": "",
"Begin": "",
"Best effort (default)": "",
"Bind": "",
"Bind DN": "",
"Bind IP Addresses": "",
"Bind Interfaces": "",
"Bind Password": "",
"Block (iSCSI) Shares Targets": "",
"Block Size": "",
"Block size": "",
"Boot": "",
"Boot Environments": "",
"Boot Loader Type": "",
"Boot Method": "",
"Boot Pool Condition": "",
"Boot Pool Status": "",
"Boot environment name. Alphanumeric characters, dashes (-), underscores (_), and periods (.) are allowed.": "",
"Boot environment to be cloned.": "",
"Bot API Token": "",
"Box": "",
"Brainpool curves can be more secure, while secp curves can be faster. See <a href=\"https://tls.mbed.org/kb/cryptography/elliptic-curve-performance-nist-vs-brainpool\" target=\"blank\"> Elliptic Curve performance: NIST vs Brainpool </a> for more information.": "",
"Branch": "",
"Bridge": "",
"Bridge Members": "",
"Bridge Settings": "",
"Bridge interface": "",
"Browsable to Network Clients": "",
"Browse to a CD-ROM file present on the system storage.": "",
"Browse to a storage location and add the name of the new raw file on the end of the path.": "",
"Browse to an existing file. Create a new file by browsing to a dataset and appending /<i>'{'filename.ext'}'</i> to the path. Extents cannot be created inside a jail root directory.": "",
"Browse to an existing pool or dataset to store the new zvol.": "",
"Browse to the desired zvol on the disk.": "",
"Browse to the existing path on the remote host to sync with. Maximum path length is 255 characters": "",
"Browse to the exported key file that can be used to unlock this dataset.": "",
"Browse to the installer image file and click <b>Upload</b>.": "",
"Browse to the keytab file to upload.": "",
"Browse to the operating system installer image file.": "",
"Browse to the path to be copied. Linux file path limits apply. Other operating systems can have different limits which might affect how they can be used as sources or destinations.": "",
"Bucket": "",
"Bucket Name": "",
"Bucket Policy Only": "",
"Bug": "",
"Builtin": "",
"Bulk Actions": "",
"Bulk Edit Disks": "",
"Bulk Operations": "",
"Bulk actions": "",
"Burst": "",
"By clicking the share creation checkbox below, a new share will be created on form submission with the default share settings Additionally, local TrueNAS users will have access to the resulting share and some more configuration options will be available.": "",
"By default, Samba uses a hashing algorithm for NTFS illegal characters. Enabling this option translates NTFS illegal characters to the Unicode private range.": "",
"By default, all data disks are created with the amount of swap specified. Changing the value does not affect the amount of swap on existing disks, only disks added after the change. Does not affect log or cache devices as they are created without swap.": "",
"By default, the VM receives an auto-generated random MAC address. Enter a custom address into the field to override the default. Click <b>Generate MAC Address</b> to add a new randomized address into this field.": "",
"By snapshot creation time": "",
"CA": "",
"CC": "",
"CD-ROM": "",
"CD-ROM Path": "",
"CN": "",
"CN Realm": "",
"CONNECT": "",
"CONTACT SUPPORT": "",
"CONVEYANCE": "",
"COPY": "",
"CPU": "",
"CPU And Memory": "",
"CPU Configuration": "",
"CPU Details": "",
"CPU Mode": "",
"CPU Model": "",
"CPU Reports": "",
"CPU Usage": "",
"CPUs and Memory": "",
"CRITICAL": "",
"CRL Sign": "",
"CSR exists on this system": "",
"CSRs": "",
"Cache": "",
"Cache VDEVs": "",
"Caches": "",
"Calculate number of threads dynamically": "",
"Callback Address": "",
"Callback State": "",
"Can be set to <i>0</i>, left empty for TrueNAS to assign a port when the VM is started, or set to a fixed, preferred port number.": "",
"Can not retrieve response": "",
"Cancel": "",
"Cancel any pending Key synchronization.": "",
"Canceled Resilver on {date}": "",
"Canceled Scrub on {date}": "",
"Cannot Edit while HA is Enabled": "",
"Cannot edit while HA is enabled.": "",
"Capabilities": "",
"Capacity": "",
"Capacity Settings": "",
"Capture and attach screenshot to the review": "",
"Case Sensitivity": "",
"Catalog": "",
"Catalog Name": "",
"Catalog Read": "",
"Catalog URL": "",
"Catalog Write": "",
"Catalog deleted": "",
"Catalog is being added. This may take some time. You can minimize this dialog and process will continue in background": "",
"Catalogs": "",
"Categories": "",
"Categories are provided by the catalog maintainers. Changing the catalogs filter may affect categories displayed.": "",
"Category": "",
"Caution: Allocating too much memory can slow the system or prevent VMs from running.": "",
"Certificate": "",
"Certificate Authorities": "",
"Certificate Authority": "",
"Certificate Authority (CA) to use for connecting to the key server. A valid CA public certificate is required to authenticate the connection. WARNING: for security reasons, please protect the Certificate Authority used for key server authentication.": "",
"Certificate Authority Read": "",
"Certificate Authority Write": "",
"Certificate Options": "",
"Certificate Read": "",
"Certificate Signing Request": "",
"Certificate Signing Requests": "",
"Certificate Subject": "",
"Certificate Write": "",
"Certificate authority created": "",
"Certificate has been created.": "",
"Certificate request signed": "",
"Certificate signing request created": "",
"Certificate to use for key server authentication. A valid certificate is required to verify the key server connection. WARNING: for security reasons, please protect the Certificate used for key server authentication.": "",
"Certificate to use when performing LDAP certificate-based authentication. To configure LDAP certificate-based authentication, create a Certificate Signing Request for the LDAP provider to sign. A certificate is not required when using username/password or Kerberos authentication.": "",
"Certificates": "",
"Change Enclosure Label": "",
"Change Password": "",
"Change Server": "",
"Change Settings and Clear Report History?": "",
"Change Token Lifetime in": "",
"Change from <i>public</i> to increase system security. Can only contain alphanumeric characters, underscores, dashes, periods, and spaces. This can be left empty for <i>SNMPv3</i> networks.": "",
"Change log": "",
"Changelog": "",
"Changes Saved": "",
"Changes to <em>Hosts Allow</em> or <em>Hosts Deny</em> take effect when the SMB service restarts.": "",
"Changes to ACL type affect how on-disk ZFS ACL is written and read.\nWhen the ACL type is changed from POSIX to NFSv4, no migration is performed for default and access ACLs encoded in the posix1e acl extended attributes to native ZFS ACLs.\nWhen ACL type is changed from NFSv4 to POSIX, native ZFS ACLs are not converted to posix1e extended attributes, but the native ACL will be used internally by ZFS for access checks.\n\nThis means that the user must manually set new ACLs recursively on the dataset after ACL type changes in order to avoid unexpected permissions behavior.\n\nThis action will be destructive, and so it is advised to take a ZFS snapshot of the dataset prior to ACL type changes and permissions modifications.": "",
"Changing Advanced settings can be dangerous when done incorrectly. Please use caution before saving.": "",
"Changing dataset permission mode can severely affect existing permissions.": "",
"Changing global 2FA settings might cause user secrets to reset. Which means users will have to reconfigure their 2FA. Are you sure you want to continue?": "",
"Changing settings below will result in Kubernetes cluster re-initialization deleting installed apps and their data.": "",
"Changing to a nightly train is one-way. Changing back to a stable train is not supported! ": "",
"Channel": "",
"Channel {n}": "",
"Chart Version": "",
"Check Alerts for more details.": "",
"Check Available Apps": "",
"Check Interval": "",
"Check Now": "",
"Check Release Notes": "",
"Check for Updates": "",
"Check for Updates Daily and Download if Available": "",
"Check the box for full upgrade. Leave unchecked to download only.": "",
"Check the update server daily for any updates on the chosen train. Automatically download an update if one is available. Click <i>APPLY PENDING UPDATE</i> to install the downloaded update.": "",
"Check this box if importing a certificate for which a CSR exists on this system": "",
"Check to enable Audit Logs": "",
"Checking HA status": "",
"Checking this option will lead to <i>/usr/sbin/zfs</i> being allowed to be executed using sudo without password. If not checked, <i>zfs allow</i> must be used to grant non-user permissions to perform ZFS tasks. Mounting ZFS filesystems by non-root still would not be possible due to Linux restrictions.": "",
"Checksum": "",
"Checksum Errors": "",
"Child Shares": "",
"Children": "",
"Choices are <i>None, Auto, CHAP,</i> or <i>Mutual CHAP</i>.": "",
"Choose": "",
"Choose <i>AES-256</i> or <i>None</i>.": "",
"Choose <i>Master</i> if the UPS is plugged directly into the system serial port. The UPS will remain the last item to shut down. Choose <i>Slave</i> to have this system shut down before <i>Master</i>. See the <a href=\"{url}\" target=\"_blank\">Network UPS Tools Overview</a>.": "",
"Choose <i>ON</i> to update the access time for files when they are read. Choose <i>Off</i> to prevent producing log traffic when reading files. This can result in significant performance gains.": "",
"Choose File": "",
"Choose Pool": "",
"Choose a DNS provider and configure any required authenticator attributes.": "",
"Choose a Disk": "",
"Choose a Tag": "",
"Choose a connection that has been saved in <b>Credentials > Backup Credentials > SSH Connections</b>.": "",
"Choose a date format.": "",
"Choose a location to store the installer image file.": "",
"Choose a new disk for the pool. To protect any existing data, adding the selected disk is stopped when the disk is already in use or has partitions present.": "",
"Choose a path to the user's home directory. If the directory exists and matches the username, it is set as the user's home directory. When the path does not end with a subdirectory matching the username, a new subdirectory is created only if the 'Create Home Directory' field is marked checked. The full path to the user's home directory is shown here when editing a user.": "",
"Choose a pool for Apps": "",
"Choose a pool to scrub.": "",
"Choose a privacy protocol.": "",
"Choose a recent IP address to limit the usage when accessing the administrative GUI. The built-in HTTP server binds to the wildcard address of <i>0.0.0.0</i> (any address) and issues an alert if the specified address becomes unavailable.": "",
"Choose a recent IPv6 address to limit the usage when accessing the administrative GUI. The built-in HTTP server binds to the wildcard address of <i>0.0.0.0</i> (any address) and issues an alert if the specified address becomes unavailable.": "",
"Choose a safety level for the rollback action. The rollback is canceled when the safety check finds additional snapshots that are directly related to the dataset being rolled back.": "",
"Choose a saved SSH Keypair or select <i>Generate New</i> to create a new keypair and use it for this connection.": "",
"Choose a temporary location for the encryption key that will decrypt replicated data.": "",
"Choose a time format.": "",
"Choose an alert service to display options for that service.": "",
"Choose an authentication method.": "",
"Choose an encryption mode to use with LDAP.": "",
"Choose between <i>Internal CA</i>, <i>Intermediate CA</i>, and <i>Import CA</i>. An <i>Internal CA</i> functions like a publicly trusted CA to sign certificates for an internal network. They are not trusted outside the private network. An <i>Intermediate CA</i> lives between the root and end entity certificates and its main purpose is to define and authorize the types of certificates that can be requested from the root CA. <i>Import CA</i> allows an existing CA to be imported onto the system.<br> For more information see <a href=\"https://www.globalsign.com/en/blog/what-is-an-intermediate-or-subordinate-certificate-authority\"> What are Subordinate CAs and Why Would You Want Your Own?</a>": "",
"Choose between a <i>Hex</i> (base 16 numeral) or <i>Passphrase</i> (alphanumeric) style encryption key.": "",
"Choose container": "",
"Choose how many log entries to create. Choices range from the least log entries (<i>Emergency</i>) to the most (<i>Debug</i>).": "",
"Choose if the .zfs snapshot directory is <i>Visible</i> or <i>Invisible</i> on this dataset.": "",
"Choose log": "",
"Choose one of the presets or choose <i>Custom</i> to use the advanced scheduler.": "",
"Choose one of the presets or select <i>Custom</i> to open the advanced scheduler.": "",
"Choose pod": "",
"Choose the VM operating system type.": "",
"Choose the backend to map Windows security identifiers (SIDs) to UNIX UIDs and GIDs. Click Edit to configure that backend.": "",
"Choose the hour and minute when new resilver tasks are not allowed to start. This does not affect active resilver tasks.": "",
"Choose the hour and minute when resilver tasks can be started.": "",
"Choose the platform that will use this share. The associated options are applied to this share.": "",
"Choose the schema to use when querying AD for user/group info. <i>rfc2307</i> uses the schema support included in Windows 2003 R2, <i>sfu</i> is for Service For Unix 3.0 or 3.5, and <i>sfu20</i> is for Service For Unix 2.0.": "",
"Choose the schema to use with LDAP authentication for SMB shares. The LDAP server must be configured with Samba attributes to use a Samba Schema. Options include <i>RFC2307</i> (included in Windows 2003 R2) and <i>Service for Unix (SFU)</i>. For SFU 3.0 or 3.5, choose \"SFU\". For SFU 2.0, choose \"SFU20\".": "",
"Choose the speed in bps used by the serial port.": "",
"Choose the test type. See <a href=\"https://www.smartmontools.org/browser/trunk/smartmontools/smartctl.8.in\" target=\"_blank\">smartctl(8)</a> for descriptions of each type. Some types will degrade performance or take disks offline. Avoid scheduling S.M.A.R.T. tests simultaneously with scrub or resilver operations.": "",
"Choose the type of interface. <i>Bridge</i> creates a logical link between multiple networks. <i>Link Aggregation</i> combines multiple network connections into a single interface. A <i>Virtual LAN (VLAN)</i> partitions and isolates a segment of the connection. Read-only when editing an interface.": "",
"Choose the type of permissions. <i>Basic</i> shows general permissions. <i>Advanced</i> shows each specific type of permission for finer control.": "",
"Choose the type that matches the type of client accessing the pool/dataset.": "",
"Choose to connect using either SSH private key stored in user's home directory or SSH connection from the keychain": "",
"Choose to either use a custom-defined remote module of the rsync server or to use an SSH configuration for the rsync task.": "",
"Choose when the UPS initiates shutdown.": "",
"Choosing an entry loads a preset ACL that is configured to match general permissions situations.": "",
"City": "",
"Classification for each S3 object. Choose a class based on the specific use case or performance requirements. See <a href=\"https://docs.aws.amazon.com/AmazonS3/latest/dev/storage-class-intro.html\" target=\"_blank\">Amazon S3 Storage Classes</a> for more information.": "",
"Clear": "",
"Clear SED Password": "",
"Clear Sync Keys": "",
"Clear the Idmap Cache": "",
"Clear the SED password for this disk.": "",
"Clearing Cache...": "",
"Click Add to add first VDEV.": "",
"Click an item to view NFSv4 permissions": "",
"Click for information on <a href=\"https://www.truenas.com/docs/truenasupgrades/\" target=\"_blank\">TrueNAS SCALE Migration, Nightly trains and other upgrade options.</a>": "",
"Clicking Continue allows TrueNAS to finish the update in the background while Abort stops the process and reverts the dataset ACL to the previously active ACL.": "",
"Client ID": "",
"Client Name": "",
"Clients": "",
"Clone": "",
"Clone Boot Environment": "",
"Clone To New Dataset": "",
"Clone to New Dataset": "",
"Close": "",
"Close expanded row": "",
"Close panel": "",
"Close the form": "",
"Cloud Credentials": "",
"Cloud Sync": "",
"Cloud Sync Read": "",
"Cloud Sync Tasks": "",
"Cloud Sync Write": "",
"Cloud Sync to Storj or similar provider": "",
"Cloud Sync «{name}» has started.": "",
"Cloud Sync «{name}» stopped.": "",
"Cloud credential added.": "",
"Cloud credential updated.": "",
"Cloudsync Task Wizard": "",
"Cluster CIDR": "",
"Cluster DNS IP": "",
"Collapse": "",
"Collapse Row": "",
"Columns": "",
"Combine multiple, critical-for-failover interfaces into a group. Groups apply to single systems. A failover occurs when every interface in the group fails. Groups with a single interface trigger a failover when that interface fails. Configuring the system to failover when any interface fails requires marking each interface as critical and placing them in separate groups.": "",
"Command": "",
"Command / Script": "",
"Command/Script": "",
"Commands": "",
"Comments": "",
"Comments about this script.": "",
"Commits in the last 60 days": "",
"Common": "",
"Common Name": "",
"Community": "",
"Compatibility": "",
"Complete the Upgrade": "",
"Completed S.M.A.R.T. Tests": "",
"Completely replicate the selected dataset. The target dataset will have all of the source dataset's properties, child datasets, clones and snapshots that match the specified naming schema. Set Snapshot Name Regular Expression to .* to replicate all snapshots.": "",
"Compress": "",
"Compress Connections": "",
"Compression Level": "",
"Compression level": "",
"Computer Account OU": "",
"Config Service": "",
"Config-Reset": "",
"Configuration Preview": "",
"Configure": "",
"Configure 2FA Secret": "",
"Configure ACL": "",
"Configure Active Directory": "",
"Configure Dashboard": "",
"Configure LDAP": "",
"Configure now": "",
"Configure permissions for this share's dataset now?": "",
"Configure {name}": "",
"Configured for simultaneous use with SMB and NFS on the same dataset.": "",
"Configuring...": "",
"Confirm": "",
"Confirm Export/Disconnect": "",
"Confirm Failover": "",
"Confirm New Password": "",
"Confirm Options": "",
"Confirm Passphrase": "",
"Confirm Passphrase value must match Passphrase": "",
"Confirm Password": "",
"Confirm SED Password": "",
"Confirm changes to <i>Group</i>. To prevent errors, changes to the <i>Group</i> are submitted only when this box is set.": "",
"Confirm changes to <i>User</i>. To prevent errors, changes to the <i>User</i> are submitted only when this box is set.": "",
"Confirm these settings.": "",
"Confirm to unset pool?": "",
"Confirmation": "",
"Connect": "",
"Connect Timeout": "",
"Connect to TrueCommand Cloud": "",
"Connect using:": "",
"Connected Initiators": "",
"Connected at": "",
"Connecting to TrueCommand": "",
"Connecting to TrueNAS": "",
"Connection Error": "",
"Connection port number on the central key server.": "",
"Connections": "",
"Console": "",
"Console Keyboard Map": "",
"Contact": "",
"Container": "",
"Container Images": "",
"Container Name": "",
"Container Read": "",
"Container Write": "",
"Containers": "",
"Content Commitment": "",
"Contents of the uploaded Service Account JSON file.": "",
"Context menu copy and paste operations are disabled in the Shell. Copy and paste shortcuts for Mac are <i>Command+c</i> and <i>Command+v</i>. For most operating systems, use <i>Ctrl+Insert</i> to copy and <i>Shift+Insert</i> to paste.": "",
"Continue": "",
"Continue with download?": "",
"Continue with the upgrade": "",
"Contract Type": "",
"Control": "",
"Controller Type": "",
"Controls whether <a href=\"https://www.truenas.com/docs/scale/scaleuireference/dataprotection/smarttestsscreensscale/\" target=\"_blank\">SMART monitoring and scheduled SMART tests</a> are enabled.": "",
"Controls whether audit messages will be generated for the share. <br><br> <b>Note</b>: Auditing may not be enabled if SMB1 support is enabled for the server.": "",
"Controls whether the user used for SSH/SSH+NETCAT replication will have passwordless sudo enabled to execute zfs commands on the remote host. If not checked, <i>zfs allow</i> must be used to grant non-user permissions to perform ZFS tasks. Mounting ZFS filesystems by non-root still would not be possible due to Linux restrictions.": "",
"Controls whether the volume snapshot devices under /dev/zvol/⟨pool⟩ are hidden or visible. The default value is hidden.": "",
"Coolest:": "",
"Copied to clipboard": "",
"Copies": "",
"Copy Json": "",
"Copy Text": "",
"Copy URL": "",
"Copy and Paste": "",
"Copy to Clipboard": "",
"Core #": "",
"Cores": "",
"Country": "",
"Create": "",
"Create ACME Certificate": "",
"Create Boot Environment": "",
"Create Dataset": "",
"Create Home Directory": "",
"Create NFS Share": "",
"Create New": "",
"Create New Primary Group": "",
"Create Pool": "",
"Create SMB Share": "",
"Create Snapshot": "",
"Create Virtual Machine": "",
"Create a custom ACL": "",
"Create a new Target or choose an existing target for this share.": "",
"Create a new home directory for user within the selected path.": "",
"Create a recommended formation of VDEVs in a pool.": "",
"Create an ACL": "",
"Create custom schedule": "",
"Create empty source dirs on destination after sync": "",
"Create more data VDEVs like the first.": "",
"Create new disk image": "",
"Create or Choose Block Device": "",
"Create pool": "",
"Created Date": "",
"Created by: {creationSource} ({creationType})": "",
"Creates dataset snapshots even when there have been no changes to the dataset from the last snapshot. Recommended for creating long-term restore points, multiple snapshot tasks pointed at the same datasets, or to be compatible with snapshot schedules or replications created in TrueNAS 11.2 and earlier.<br><br> For example, allowing empty snapshots for a monthly snapshot schedule allows that monthly snapshot to be taken, even when a daily snapshot task has already taken a snapshot of any changes to the dataset.": "",
"Creating ACME Certificate": "",
"Creating or editing a <i>sysctl</i> immediately updates the Variable to the configured Value. A restart is required to apply <i>loader</i> or <i>rc.conf</i> tunables. Configured tunables remain in effect until deleted or Enabled is unset.": "",
"Creation Time": "",
"Credential": "",
"Credentials": "",
"Credentials: {credentials}": "",
"Critical": "",
"Critical Extension": "",
"Critical applications": "",
"Criticality": "",
"Cron Jobs": "",
"Cron job created": "",
"Cron job updated": "",
"Cronjob deleted": "",
"Cryptographic protocols for securing client/server connections. Select which <a href=\"https://en.wikipedia.org/wiki/Transport_Layer_Security\" target=\"_blank\">Transport Layer Security (TLS)</a> versions TrueNAS can use for connection security.": "",
"Current Configuration": "",
"Current Default Gateway": "",
"Current Password": "",
"Current State": "",
"Current Train:": "",
"Current Version": "",
"Custom": "",
"Custom ({customTransfers})": "",
"Custom ACME Server Directory URI": "",
"Custom App": "",
"Custom Name": "",
"Custom Transfers": "",
"Custom Value": "",
"Customer Name": "",
"Customizes the importance of the alert. Each level of importance has a different icon and color to express the level of importance.": "",
"DEBUG": "",
"DEFAULT": "",
"DHCP": "",
"DNS Domain Name": "",
"DNS Servers": "",
"DNS Timeout": "",
"DNS name of the domain": "",
"DNS timeout in seconds. Increase this value if DNS queries timeout.": "",
"DQ % Used": "",
"DQ Used": "",
"DS Groups": "",
"Daily time range for the specific periodic snapshots to replicate, in 15 minute increments. Periodic snapshots created before the <i>Begin</i> time will not be included in the replication.": "",
"Daily time range for the specific periodic snapshots to replicate, in 15 minute increments. Snapshots created after the <i>End</i> time will not be included in the replication.": "",
"Dashboard": "",
"Dashboard Configure": "",
"Dashboard is Empty!": "",
"Dashboard settings saved": "",
"Data": "",
"Data Devices": "",
"Data Encipherment": "",
"Data Protection": "",
"Data Quota": "",
"Data VDEVs": "",
"Data Written": "",
"Data is identical in each disk. A mirror requires at least two disks, provides the most redundancy, and has the least capacity.": "",
"Data not available": "",
"Data transfer security. The connection is authenticated with SSH. Data can be encrypted during transfer for security or left unencrypted to maximize transfer speed. Encryption is recommended, but can be disabled for increased speed on secure networks.": "",
"Database": "",
"Dataset": "",
"Dataset Delete": "",
"Dataset Details": "",
"Dataset Key": "",
"Dataset Name": "",
"Dataset Passphrase": "",
"Dataset Preset": "",
"Dataset Read": "",
"Dataset Rollback From Snapshot": "",
"Dataset Space Management": "",
"Dataset Write": "",
"Dataset for use by an application. If you plan to deploy container applications, the system automatically creates the ix-applications dataset but this is not used for application data storage.": "",
"Dataset has no mountpoint": "",
"Dataset is currently locked": "",
"Dataset is shared via NFS": "",
"Dataset is shared via SMB": "",
"Dataset is shared via SMB as {shares}": "",
"Dataset is shared via iSCSI": "",
"Dataset locked": "",
"Dataset name is set by appending the parent path with the name entered by you. The max allowed length for the dataset name is 200. The parent path for this dataset already exceeds that limit. It is not possible to create anymore nested datasets under this path.": "",
"Dataset promoted successfully.": "",
"Dataset rolled back to snapshot {name}.": "",
"Dataset settings updated.": "",
"Dataset {name} was created.": "",
"Dataset «{name}» updated.": "",
"Datasets": "",
"Datastore": "",
"Date": "",
"Date Created": "",
"Date Format": "",
"Date created": "",
"Day(s)": "",
"Days": "",
"Days before a completed scrub is allowed to run again. This controls the task schedule. For example, scheduling a scrub to run daily and setting <b>Threshold days</b> to <i>7</i> means the scrub attempts to run daily. When the scrub is successful, it continues to check daily but does not run again until seven days have elapsed. Using a multiple of seven ensures the scrub always occurs on the same weekday.": "",
"Days of Month": "",
"Days of Week": "",
"Days of the Week": "",
"Days when this task will run.": "",
"De-duplication tables are stored on this special VDEV type. These VDEVs must be sized to X GiB for each X TiB of general storage.": "",
"Debug": "",
"Debug could not be downloaded.": "",
"Debugs may contain log files with personal information such as usernames or other identifying information about your system.": "",
"Dec": "",
"Decipher Only": "",
"Dedup": "",
"Dedup VDEVs": "",
"Default": "",
"Default ACL Options": "",
"Default Checksum Warning": "",
"Default Gateway": "",
"Default Route": "",
"Default TrueNAS controller": "",
"Default is UTF-8 which supports all characters in all languages.": "",
"Define a length of time to retain the snapshot on this system. After the time expires, the snapshot is removed. Snapshots which have been replicated to other systems are not affected.": "",
"Define a maximum size for both the dataset and any child datasets. Enter <i>0</i> to remove the quota.": "",
"Define a number of minutes for <a href=\"https://linux.die.net/man/8/smartd\" target=\"_blank\">smartd</a> to wake up and check if any tests are configured to run.": "",
"Define an alias for the interface on this TrueNAS controller. The alias can be an IPv4 or IPv6 address.": "",
"Define an alias that can connect to the interface on either TrueNAS controller. This address remains active if a Controller failover occurs.": "",
"Define the maximum number of chunks for a multipart upload. This can be useful if a service does not support the 10,000 chunk AWS S3 specification.": "",
"Define the number of UIDS/GIDS available per domain range. The minimum is <i>2000</i> and the recommended default is <i>100000</i>.": "",
"Define the path to a system location that has snapshots to replicate. Click the <i class=\"material-icons\">folder</i> to see all locations on the source system or click in the field to manually type a location (Example: <code>pool1/dataset1</code>). Multiple source locations can be selected or manually defined with a comma (<code>,</code>) separator.": "",
"Define the path to a system location that has snapshots to replicate. Click the <i class=\"material-icons\">folder</i> to see all locations on the source system or click in the field to manually type a location (Example: <code>pool1/dataset1</code>). Multiple source locations can be selected or manually defined with a comma (<code>,</code>) separator. <br><br> Selecting a location displays the number of existing snapshots that can be replicated. Selecting a location that has no snapshots configures the replication task to take a manual snapshot of that location and replicate it to the destination.": "",
"Define the path to a system location that will store replicated snapshots. Click the <i class=\"material-icons\">folder</i> to see all locations on the destination system or click in the field to manually type a location path (Example: <code>pool1/dataset1</code>). Selecting a location defines the full path to that location as the destination. Appending a name to the path will create new zvol at that location.<br><br> For example, selecting <i>pool1/dataset1</i> will store snapshots in <i>dataset1</i>, but clicking the path and typing <code>/zvol1</code> after <i>dataset1</i> will create <i>zvol1</i> for snapshot storage.": "",
"Define the path to an existing zvol for VM use.": "",
"Define the server where all changes to the database are performed.": "",
"Define the server where all password changes are performed.": "",
"Define the size of the raw file in GiB.": "",
"Define the system services that are allowed to communicate externally. All other external traffic is restricted.": "",
"Define the target as *iSCSI*, *Fibre Channel*, or *Both*.": "",
"Define whether the control channel, data channel, both channels, or neither channel of an FTP session must occur over SSL/TLS. The policies are described <a href=\"http://www.proftpd.org/docs/directives/configuration_full.html#TLSREQUIRED\" target=\"_blank\">here</a>": "",
"Degraded": "",
"Delay Updates": "",
"Delay VM Boot Until VNC Connects": "",
"Delete": "",
"Delete <b>{deviceType} {device}</b>": "",
"Delete API Key": "",
"Delete All Selected": "",
"Delete Allowed Address": "",
"Delete Catalog": "",
"Delete Certificate": "",
"Delete Certificate Authority": "",
"Delete Children": "",
"Delete Cloud Credential": "",
"Delete Cloud Sync Task <b>\"{name}\"</b>?": "",
"Delete DNS Authenticator": "",
"Delete Device": "",
"Delete Group": "",
"Delete Group Quota": "",
"Delete Init/Shutdown Script {script}?": "",
"Delete Interface": "",
"Delete NTP Server": "",
"Delete Periodic Snapshot Task <b>\"{value}\"</b>?": "",
"Delete Privilege": "",
"Delete Replication Task <b>\"{name}\"</b>?": "",
"Delete Reporting Exporter": "",
"Delete Rsync Task <b>\"{name}\"</b>?": "",
"Delete S.M.A.R.T. Test <b>\"{name}\"</b>?": "",
"Delete SSH Connection": "",
"Delete SSH Keypair": "",
"Delete Script": "",
"Delete Scrub Task <b>\"{name}\"</b>?": "",
"Delete Static Route": "",
"Delete Sysctl": "",
"Delete Sysctl Variable {variable}?": "",
"Delete Target {name}": "",
"Delete Target/Extent {name}": "",
"Delete Task": "",
"Delete User": "",
"Delete User Quota": "",
"Delete Virtual Machine": "",
"Delete Virtual Machine Data?": "",
"Delete dataset {name}": "",
"Delete files in the destination directory that do not exist in the source directory.": "",
"Delete iSCSI extent {name}?": "",
"Delete raw file": "",
"Delete saved configurations from TrueNAS?": "",
"Delete selections": "",
"Delete snapshot {name}?": "",
"Delete the selected item?": "",
"Delete user primary group `{name}`": "",
"Delete zvol device": "",
"Delete zvol {name}": "",
"Delete {n, plural, one {# user} other {# users}} with this primary group?": "",
"Delete {name}?": "",
"Deleted {n, plural, one {# snapshot} other {# snapshots}}": "",
"Deleting exporter": "",
"Deleting interfaces while HA is enabled is not allowed.": "",
"Deleting...": "",
"Deny": "",
"Deny All": "",
"Deploying": "",
"Deployments": "",
"Deregister": "",
"Deregister TrueCommand Cloud Service": "",
"Describe the UPS device. It can contain alphanumeric, period, comma, hyphen, and underscore characters.": "",
"Describe the scrub task.": "",
"Describe this service.": "",
"Description": "",
"Description (optional).": "",
"Description of the share or notes on how it is used.": "",
"Descriptive identifier for this API key.": "",
"Descriptive identifier for this certificate authority.": "",
"Descriptive identifier for this certificate.": "",
"Descriptive name for the replication.": "",
"Destination": "",
"Destination Dataset Read-only Policy": "",
"Destination Location": "",
"Destination Snapshot Lifetime": "",
"Destination Snapshots Are Not Related to Replicated Snapshots": "",
"Destination dataset does not contain any snapshots that can be used as a basis for the incremental changes in the snapshots being sent. The snapshots in the destination dataset will be deleted and the replication will begin with a complete initial copy.": "",
"Destroy data on this pool?": "",
"Detach": "",
"Detach Disk": "",
"Detach disk {name}?": "",
"Details": "",
"Details for": "",
"Details for {vmDevice}": "",
"Determine how <a href=\"https://man7.org/linux/man-pages/man1/chmod.1.html\" target=\"_blank\">chmod</a> behaves when adjusting file ACLs. See the <a href=\"https://linux.die.net/man/8/zfs\" target=\"_blank\">zfs(8)</a> aclmode property. <br><br><i>Passthrough</i> only updates ACL entries that are related to the file or directory mode. <br><br><i>Restricted</i> does not allow chmod to make changes to files or directories with a non-trivial ACL. An ACL is trivial if it can be fully expressed as a file mode without losing any access rules. Setting the ACL Mode to Restricted is typically used to optimize a dataset for SMB sharing, but can require further optimizations. For example, configuring an rsync task with this dataset could require adding <i>--no-perms</i> in the task <i>Auxiliary Parameters</i> field.": "",
"Determine whether this share name is included when browsing shares. Home shares are only visible to the owner regardless of this setting.": "",
"Determines the outgoing and incoming traffic ports.<br> <i>LACP</i> is the recommended protocol if the network switch is capable of active LACP.<br><i>Failover</i> is the default protocol choice and should only be used if the network switch does not support active LACP.": "",
"Developer": "",
"Device": "",
"Device Attached": "",
"Device Busy": "",
"Device ID": "",
"Device Name": "",
"Device Order": "",
"Device added": "",
"Device detached": "",
"Device names of each disk being edited.": "",
"Device updated": "",
"Device/File": "",
"Devices": "",
"Difference": "",
"Digest Algorithm": "",
"Digital Signature": "",
"Direct the flow of data to the remote host.": "",
"Direction": "",
"Directories and Permissions": "",
"Directory Inherit": "",
"Directory Mask": "",
"Directory Permissions": "",
"Directory Services": "",
"Directory Services Groups": "",
"Directory Services Monitor": "",
"Directory/Files": "",
"Disable AD User / Group Cache": "",
"Disable Endpoint Region": "",
"Disable Failover": "",
"Disable LDAP User/Group Cache": "",
"Disable Password": "",
"Disable Physical Block Size Reporting": "",
"Disable automatic failover.": "",
"Disable caching LDAP users and groups in large LDAP environments. When caching is disabled, LDAP users and groups do not appear in dropdown menus, but are still accepted when manually entered.": "",
"Disabled": "",
"Disabled in Disk Settings": "",
"Disabling host path validation may result in undefined behavior from TrueNAS system\n services that access host paths mounted within kubernetes.<br>\n Undefined behavior may include loss of access to data through inadvertent permissions changes,\n loss of data due to lack of validation of application compatibility, and application stability issues.<br><br>\n As such, this configuration is unsupported and bug reports in which this configuration plays a role\n may be closed as a user configuration issue without further investigation.": "",
"Discard": "",
"Disconnect": "",
"Discover": "",
"Discover Apps": "",
"Discover Remote Host Key": "",
"Discovery Auth Group": "",
"Discovery Auth Method": "",
"Discovery Authentication Group": "",
"Discovery Authentication Method": "",
"Disk": "",
"Disk Description": "",
"Disk Details": "",
"Disk Health": "",
"Disk Info": "",
"Disk Reports": "",
"Disk Sector Size": "",
"Disk Size": "",
"Disk Type": "",
"Disk Wiped successfully": "",
"Disk device name.": "",
"Disk is unavailable": "",
"Disk not attached to any pools.": "",
"Disk settings successfully saved.": "",
"Disks": "",
"Disks Overview": "",
"Disks temperature related alerts": "",
"Disks to be edited:": "",
"Disks with Errors": "",
"Dismiss": "",
"Dismiss All Alerts": "",
"Dismissed": "",
"Dispersal Strategy": "",
"Display": "",
"Display Login": "",
"Display Port": "",
"Display console messages in real time at the bottom of the browser.": "",
"Display network interface IP address. The primary interface IP address is the default. A different interface IP address can be chosen.": "",
"Distinguished Name": "",
"Distributed Hot Spares": "",
"Do <b>NOT</b> change this setting when using Windows as the initiator. Only needs to be changed in large environments where the number of systems using a specific RPM is needed for accurate reporting statistics.": "",
"Do any of them look similar?": "",
"Do not enable ALUA on TrueNAS unless it is also supported by and enabled on the client computers. ALUA only works when enabled on both the client and server.": "",
"Do not save": "",
"Do not set this if the Serial Port is disabled.": "",
"Do you want to configure the ACL?": "",
"Docker Host": "",
"Docker Registry Authentication": "",
"Does your business need <a href=\"https://www.ixsystems.com/truenas/?utm_source=truenas+core+ui&utm_medium=os&utm_campaign=welcome\" target=\"_blank\">Enterprise level</a> support and services? Contact <a href=\"https://www.ixsystems.com/quote-form/?utm_source=truenas+core+ui&utm_medium=os&utm_campaign=welcome\"target=\"_blank\">iXsystems</a> for more information.": "",
"Domain": "",
"Domain Account Name": "",
"Domain Account Password": "",
"Domain Name": "",
"Domain:": "",
"Domains": "",
"Don't Allow": "",
"Done": "",
"Download": "",
"Download Authorized Keys": "",
"Download Encryption Key": "",
"Download File": "",
"Download Key": "",
"Download Keys": "",
"Download Logs": "",
"Download Private Key": "",
"Download Public Key": "",
"Download Update": "",
"Download Updates": "",
"Download actions": "",
"Download encryption keys": "",
"Download keys": "",
"Drag & drop disks to add or remove them": "",
"Drive Details": "",
"Drive Temperatures": "",
"Drive reserved for inserting into DATA pool VDEVs when an active drive has failed.": "",
"Driver": "",
"Drives and IDs registered to the Microsoft account. Selecting a drive also fills the <i>Drive ID</i> field.": "",
"Dropbox": "",
"Dry Run": "",
"Dry Run Cloud Sync Task": "",
"E-mail address that will receive SNMP service messages.": "",
"EC Curve": "",
"EC2 Instance ID": "",
"EDIT LABEL": "",
"EMERGENCY": "",
"ERROR": "",
"ERROR: Not Enough Memory": "",
"EULA": "",
"EXPIRED": "",
"EXPIRES TODAY": "",
"Each disk stores data. A stripe requires at least one disk and has no data redundancy.": "",
"Edit": "",
"Edit ACL": "",
"Edit API Key": "",
"Edit Alert Service": "",
"Edit Application Settings": "",
"Edit Associated Target": "",
"Edit Authorized Access": "",
"Edit Auto TRIM": "",
"Edit CSR": "",
"Edit Catalog": "",
"Edit Certificate": "",
"Edit Certificate Authority": "",
"Edit Cloud Sync Task": "",
"Edit Cron Job": "",
"Edit DNS Authenticator": "",
"Edit Dataset": "",
"Edit Device": "",
"Edit Disk": "",
"Edit Disk(s)": "",
"Edit Encryption Options for {dataset}": "",
"Edit Extent": "",
"Edit Filesystem ACL": "",
"Edit Global Configuration": "",
"Edit Group": "",
"Edit Group Quota": "",
"Edit ISCSI Target": "",
"Edit Idmap": "",
"Edit Init/Shutdown Script": "",
"Edit Interface": "",
"Edit Kerberos Keytab": "",
"Edit Kerberos Realm": "",
"Edit Manual Disk Selection": "",
"Edit NFS Share": "",
"Edit NTP Server": "",
"Edit Periodic Snapshot Task": "",
"Edit Permissions": "",
"Edit Portal": "",
"Edit Privilege": "",
"Edit Replication Task": "",
"Edit Reporting Exporter": "",
"Edit Rsync Task": "",
"Edit S.M.A.R.T. Test": "",
"Edit SMB": "",
"Edit SSH Connection": "",
"Edit Scrub Task": "",
"Edit Share ACL": "",
"Edit Static Route": "",
"Edit Sysctl": "",
"Edit User": "",
"Edit User Quota": "",
"Edit VM": "",
"Edit VM Snapshot": "",
"Edit Zvol": "",
"Editing interface will result in default gateway being removed, which may result in TrueNAS being inaccessible. You can provide new default gateway now:": "",
"Editing interfaces while HA is enabled is not allowed.": "",
"Editing top-level datasets can prevent users from accessing data in child datasets.": "",
"Electing {controller}.": "",
"Elements": "",
"Email": "",
"Email Options": "",
"Email Subject": "",
"Email addresses must be entered in the format <i>local-name</i>@<i>domain.com<i>, with entries separated by pressing <code>Enter</code>.": "",
"Email addresses to receive copies of iXsystems Support messages about this issue. Use the format <i>name</i>@<i>domain.com</i>. Separate entries by pressing <code>Enter</code>.": "",
"Email settings updated.": "",
"Emergency": "",
"Empty": "",
"Emulating an <i>Intel e82545 (e1000)</i> Ethernet card provides compatibility with most operating systems. Change to <i>VirtIO</i> to provide better performance on systems with VirtIO paravirtualized network driver support.": "",
"Enable": "",
"Enable <a href=\"https://en.wikipedia.org/wiki/SMTP_Authentication\" target=\"_blank\">SMTP AUTH</a> using PLAIN SASL. Requires a valid Username and Password.": "",
"Enable <a href=\"https://zfsonlinux.org/manpages/0.8.3/man8/zfs.8.html\" target=\"_blank\">ZFS encryption</a> for this pool and add an encryption algorithm selector.": "",
"Enable (requires password or Kerberos principal)": "",
"Enable ACL": "",
"Enable ACL support for the SMB share.": "",
"Enable Active Directory": "",
"Enable Alternate Data Streams": "",
"Enable Apple SMB2/3 Protocol Extensions": "",
"Enable Atime": "",
"Enable Container Image Updates": "",
"Enable Debug Kernel": "",
"Enable Display": "",
"Enable FIPS": "",
"Enable FSRVP": "",
"Enable FXP": "",
"Enable GMail OAuth authentication.": "",
"Enable GPU support": "",
"Enable HTTPS Redirect": "",
"Enable Hyper-V Enlightenments": "",
"Enable Integrated Loadbalancer": "",
"Enable Integrated Metrics Server": "",
"Enable S.M.A.R.T.": "",
"Enable SMB1 support": "",
"Enable SMB2/3 Durable Handles": "",
"Enable SMTP configuration": "",
"Enable Serial Console": "",
"Enable Service": "",
"Enable Shadow Copies": "",
"Enable TLS": "",
"Enable TPC": "",
"Enable Time Machine backups on this share.": "",
"Enable Two Factor Authentication Globally": "",
"Enable Two Factor Authentication for SSH": "",
"Enable a Display (Virtual Network Computing) remote connection. Requires <i>UEFI</i> booting.": "",
"Enable for TrueNAS to periodically review data blocks and identify empty blocks, or obsolete blocks that can be deleted. Unset to use dirty block overwrites (default).": "",
"Enable iXsystems Proactive Support": "",
"Enable passwordless sudo for zfs commands": "",
"Enable sending anonymous usage statistics to iXsystems.": "",
"Enable service": "",
"Enable support for the File Server Remote VSS Protocol (<a href=\"https://docs.microsoft.com/en-us/openspecs/windows_protocols/ms-fsrvp\" target=\"_blank\">FSVRP</a>). This protocol allows RPC clients to manage snapshots for a specific SMB share. The share path must be a dataset mountpoint. Snapshots have the prefix <code>fss-</code> followed by a snapshot creation timestamp. A snapshot must have this prefix for an RPC user to delete it.": "",
"Enable the Active Directory service. The first time this option is set, the Domain Account Password must be entered.": "",
"Enable the SNMPv3 security model.": "",
"Enable this Cloud Sync Task. Unset to disable this Cloud Sync Task without deleting it.": "",
"Enable this NFS share. Unset to disable this NFS share without deleting it.": "",
"Enable this SMB share. Unset to disable this SMB share without deleting it.": "",
"Enable this cron job. When unset, disable the cron job without deleting it.": "",
"Enable this rsync task. Unset to disable this rsync task without deleting it.": "",
"Enable this service to start automatically.": "",
"Enable this task. Unset to disable the task without deleting it.": "",
"Enable this tunable. Unset to disable this tunable without deleting it.": "",
"Enable to use thin provisioning where disk space for this volume is allocated <b>‘on demand’</b> as new writes are received. Use caution when enabling this feature, as writes can fail when the pool is low on space.": "",
"Enable/Disable STP on the bridge interfaces configurable.": "",
"Enabled": "",
"Enabled 'Time Machine'": "",
"Enabled 'Use as Home Share'": "",
"Enabled HTTPS Redirect": "",
"Enabled Protocols": "",
"Enabling <em>Time Machine</em> on an SMB share requires restarting the SMB service.": "",
"Enabling allows using a password to authenticate the SSH login. <i>Warning:</i> when directory services are enabled, allowing password authentication can grant access to all users imported by the directory service.<br> Disabling changes authentication to require keys for all users. This requires <a href=\"http://the.earth.li/%7Esgtatham/putty/0.55/htmldoc/Chapter8.html\" target=\"_blank\">additional setup</a> on both the SSH client and server.": "",
"Enabling redirect will require all URLs served from current host to be served via HTTPS regardless of port used. This may make some App portals inaccessible if they don't use HTTPS. Do you wish to continue?": "",
"Enabling this option can expose administrator credentials and is not recommended.": "",
"Enabling this option is <b>not</b> recommended as it bypasses a security mechanism.": "",
"Encipher Only": "",
"Enclosure": "",
"Enclosure Options": "",
"Enclosure Read": "",
"Enclosure Write": "",
"Encode information in less space than the original data occupies. It is recommended to choose a compression algorithm that balances disk performance with the amount of saved space.<br> <i>LZ4</i> is generally recommended as it maximizes performance and dynamically identifies the best files to compress.<br> <i>GZIP</i> options range from 1 for least compression, best performance, through 9 for maximum compression with greatest performance impact.<br> <i>ZLE</i> is a fast algorithm that only eliminates runs of zeroes.": "",
"Encrypted Datasets": "",
"Encryption": "",
"Encryption (more secure, but slower)": "",
"Encryption Key": "",
"Encryption Key Format": "",
"Encryption Key Location in Target System": "",
"Encryption Mode": "",
"Encryption Options": "",
"Encryption Options Saved": "",
"Encryption Password": "",
"Encryption Protocol": "",
"Encryption Root": "",
"Encryption Salt": "",
"Encryption Standard": "",
"Encryption Type": "",
"Encryption is for users storing sensitive data. Pool-level encryption does not apply to the storage pool or disks in the pool. It applies to the root dataset that shares the pool name and any child datasets created unless you change the encryption at the time you create the child dataset. For more information on encryption please refer to the <a href=\"http://TrueNAS.com/docs/\" target=\"_blank\">TrueNAS Documentation hub</a>.": "",
"Encryption key that can unlock the dataset.": "",
"End": "",
"End User License Agreement - TrueNAS": "",
"End time for the replication task. A replication that is already in progress can continue to run past this time.": "",
"Endpoint": "",
"Endpoint Type": "",
"Endpoint URL": "",
"Enforce the use of FIPS 140-2 compliant algorithms": "",
"Ensure Display Device": "",
"Ensure valid entries exist in <b>Directory Services > Kerberos Realms</b> and <b>Directory Services > Kerberos Keytabs</b> and the system can communicate with the Kerberos Domain Controller before enabling this option.": "",
"Enter <strong>{pool}</strong> below to confirm": "",
"Enter <strong>{zvolName}</strong> below to confirm.": "",
"Enter a Name (optional)": "",
"Enter a VNC password to automatically pass to the VNC session.": "",
"Enter a description of the Cloud Sync Task.": "",
"Enter a description of the cron job.": "",
"Enter a description of the interface.": "",
"Enter a description of the rsync task.": "",
"Enter a description of the static route.": "",
"Enter a description of the tunable.": "",
"Enter a descriptive title for the new issue.": "",
"Enter a list of allowed hostnames or IP addresses. Separate entries by pressing <code>Enter</code>. A more detailed description with examples can be found <a href=\"{url}\" target=\"_blank\">here</a>. <br><br> If neither *Hosts Allow* or *Hosts Deny* contains an entry, then SMB share access is allowed for any host. <br><br> If there is a *Hosts Allow* list but no *Hosts Deny* list, then only allow hosts on the *Hosts Allow* list. <br><br> If there is a *Hosts Deny* list but no *Hosts Allow* list, then allow all hosts that are not on the *Hosts Deny* list. <br><br> If there is both a *Hosts Allow* and *Hosts Deny* list, then allow all hosts that are on the *Hosts Allow* list. <br><br> If there is a host not on the *Hosts Allow* and not on the *Hosts Deny* list, then allow it.": "",
"Enter a list of chat IDs separated by space, comma or semicolon. To find your chat ID send a message to the bot, group or channel and visit <a href=\"https://api.telegram.org/bot<BOT_TOKEN>/getUpdates\" target=\"_blank\">https://api.telegram.org/bot<BOT_TOKEN>/getUpdates</a>.": "",
"Enter a list of denied hostnames or IP addresses. Separate entries by pressing <code>Enter</code>. If neither *Hosts Allow* or *Hosts Deny* contains an entry, then SMB share access is allowed for any host. <br><br> If there is a *Hosts Allow* list but no *Hosts Deny* list, then only allow hosts on the *Hosts Allow* list. <br><br> If there is a *Hosts Deny* list but no *Hosts Allow* list, then allow all hosts that are not on the *Hosts Deny* list. <br><br> If there is both a *Hosts Allow* and *Hosts Deny* list, then allow all hosts that are on the *Hosts Allow* list. <br><br> If there is a host not on the *Hosts Allow* and not on the *Hosts Deny* list, then allow it.": "",
"Enter a long string of random characters for use as <a href=\"https://searchsecurity.techtarget.com/definition/salt\" target=\"_blank\">salt</a> for the encryption password. <b>Warning:</b> Always securely back up the encryption salt value! Losing the salt value will result in data loss.": "",
"Enter a name for the interface. Use the format <samp>bond<i>X</i></samp>, <samp>vlan<i>X</i></samp>, or <samp>br<i>X</i></samp> where <i>X</i> is a number representing a non-parent interface. Read-only when editing an interface.": "",
"Enter a name for the new credential.": "",
"Enter a name for the share.": "",
"Enter a name for this Keytab.": "",
"Enter a number of degrees in Celsius. S.M.A.R.T. reports if the temperature of a drive has changed by N degrees Celsius since the last report.": "",
"Enter a number of seconds to wait before alerting that the service cannot reach any UPS. Warnings continue until the situation is fixed.": "",
"Enter a one to three paragraph summary of the issue. Describe the problem and provide any steps to replicate the issue.": "",
"Enter a password for the <i>rancher</i> user. This is used to log in to the VM from the serial shell.": "",
"Enter a password for the VNC display.": "",
"Enter a password of at least eight characters.": "",
"Enter a port to bind <a href=\"https://linux.die.net/man/8/rpc.lockd\" target=\"_blank\">rpc.lockd(8)</a>.": "",
"Enter a port to bind <a href=\"https://man7.org/linux/man-pages/man8/mountd.8.html\" target=\"_blank\">mountd(8)</a>.": "",
"Enter a port to bind <a href=\"https://man7.org/linux/man-pages/man8/statd.8.html\" target=\"_blank\">rpc.statd(8)</a>.": "",
"Enter a separate privacy passphrase. <b>Password</b> is used when this is left empty.": "",
"Enter a threshold temperature in Celsius. S.M.A.R.T. will message with a log level of LOG_CRIT and send an email if the temperature is higher than the threshold.": "",
"Enter a threshold temperature in Celsius. S.M.A.R.T. will message with a log level of LOG_INFO if the temperature is higher than the threshold.": "",
"Enter a unique name for the dataset. The dataset name length is calculated by adding the length of this field's value and the length of the parent path field value. The length of 'Parent Path' and 'Name' added together cannot exceed 200 characters. Because of this length validation on this field accounts for the parent path as well. Furthermore, the maximum nested directory levels allowed is 50. You can't create a dataset that's at the 51st level in the directory hierarchy after you account for the nested levels in the parent path.": "",
"Enter a user to associate with this service. Keeping the default is recommended.": "",
"Enter a username to register with this service.": "",
"Enter a valid IPv4 address.": "",
"Enter a valid email address to receive alerts from this system.": "",
"Enter a value in seconds for the the UPS to wait before initiating shutdown. Shutdown will not occur if power is restored while the timer is counting down. This value only applies when <b>Shutdown mode</b> is set to <i>UPS goes on battery</i>.": "",
"Enter a value to use for the <a href=\"https://man7.org/linux/man-pages/man8/sysctl.8.html\" target=\"_blank\">sysctl</a> variable.": "",
"Enter accounts that have administrative access. See <a href=\"https://linux.die.net/man/5/upsd.users\" target=\"_blank\">upsd.users(5)</a> for examples.": "",
"Enter additional <b>smb.conf</b> options. See the <a href=\"http://www.oreilly.com/openbook/samba/book/appb_02.html\" target=\"_blank\">Samba Guide</a> for more information on these settings.<br> To log more details when a client attempts to authenticate to the share, add <code>log level = 1, auth_audit:5</code>.": "",
"Enter an IPv4 address. This overrides the default gateway provided by DHCP.": "",
"Enter an IPv6 address. This overrides the default gateway provided by DHCP.": "",
"Enter an alphanumeric encryption key. Only available when <i>Passphrase</i> is the chosen key format.": "",
"Enter an alphanumeric name for the certificate. Underscore (_), and dash (-) characters are allowed.": "",
"Enter an alphanumeric name for the virtual machine.": "",
"Enter an optimal number of threads used by the kernel NFS server.": "",
"Enter any additional <a href=\"http://net-snmp.sourceforge.net/docs/man/snmpd.conf.html\" target=\"_blank\">snmpd.conf(5)</a> options. Add one option for each line.": "",
"Enter any aliases, separated by spaces. Each alias can be up to 15 characters long.": "",
"Enter any email addresses to receive status updates. Separate entries by pressing <code>Enter</code>.": "",
"Enter any extra options from <a href=\"http://networkupstools.org/docs/man/ups.conf.html\" target=\"_blank\">UPS.CONF(5)</a>.": "",
"Enter any extra options from <a href=\"http://networkupstools.org/docs/man/upsd.conf.html\" target=\"_blank\">UPSD.CONF(5)</a>.": "",
"Enter any information about this S.M.A.R.T. test.": "",
"Enter any notes about this dataset.": "",
"Enter dataset name to continue.": "",
"Enter or paste a string to use as the encryption key for this dataset.": "",
"Enter or paste the \"integration/service\" key for this system to access the <a href=\"https://v2.developer.pagerduty.com/v2/docs/events-api\" target=\"_blank\">PagerDuty API</a>.": "",
"Enter or paste the <a href=\"https://docs.mattermost.com/configure/integrations-configuration-settings.html#integrate-enableincomingwebhooks\" target=\"_blank\">incoming webhook</a> URL associated with this service.": "",
"Enter or paste the <a href=\"https://docs.opsgenie.com/v1.0/docs/api-integration\" target=\"_blank\">API key</a>. Find the API key by signing into the OpsGenie web interface and going to Integrations/Configured Integrations. Click the desired integration, Settings, and read the API Key field.": "",
"Enter or paste the <a href=\"https://help.victorops.com/knowledge-base/api/\" target=\"_blank\">VictorOps API key</a>.": "",
"Enter or paste the <b>public</b> SSH key of the user for any key-based authentication. <b>Do not paste the private key.</b>": "",
"Enter or paste the API key provided from <a href=\"https://portal.ixsystems.com/portal/login/\" target=\"_blank\">iXsystems Account Services</a>. Login or signup is required.": "",
"Enter or select the cloud storage location to use for this task.": "",
"Enter password.": "",
"Enter the <a href=\"https://docs.aws.amazon.com/sns/latest/dg/sms_supported-countries.html\" target=\"_blank\">AWS account region</a>.": "",
"Enter the <a href=\"https://docs.influxdata.com/influxdb/\" target=\"_blank\">InfluxDB</a> hostname.": "",
"Enter the <a href=\"https://kb.iu.edu/d/aiuv\" target=\"_blank\">fully-qualified hostname (FQDN)</a> of the system. This name must be unique within a certificate chain.": "",
"Enter the Active Directory administrator account name.": "",
"Enter the Active Directory domain (<i>example.com</i>) or child domain (<i>sales.example.com</i>).": "",
"Enter the IP address of the gateway.": "",
"Enter the IP address or hostname of the VMware host. When clustering, this is the vCenter server for the cluster.": "",
"Enter the IP address or hostname of the remote system that will store the copy. Use the format <i>username@remote_host</i> if the username differs on the remote host.": "",
"Enter the SSH Port of the remote system.": "",
"Enter the command with any options.": "",
"Enter the default gateway of the IPv4 connection.": "",
"Enter the desired address into the field to override the randomized MAC address.": "",
"Enter the device name of the interface. This cannot be changed after the interface is created.": "",
"Enter the email address of the new user.": "",
"Enter the email address of the person responsible for the CA.": "",
"Enter the email of the contact person. Use the format <i>name</i>@<i>domain.com</i>.": "",
"Enter the filesystem to snapshot.": "",
"Enter the full path to the command or script to be run.": "",
"Enter the hostname or IP address of the <b>NTP</b> server.": "",
"Enter the hostname to connect to.": "",
"Enter the location of the organization. For example, the city.": "",
"Enter the location of the system.": "",
"Enter the maximum number of attempts before client is disconnected. Increase this if users are prone to typos.": "",
"Enter the name of the Key Distribution Center.": "",
"Enter the name of the company or organization.": "",
"Enter the name of the contact person.": "",
"Enter the name of the realm.": "",
"Enter the name of the sysctl variable to configure. <i>sysctl</i> tunables are used to configure kernel parameters while the system is running and generally take effect immediately.": "",
"Enter the numeric tag configured in the switched network.": "",
"Enter the passphrase for the Private Key.": "",
"Enter the password associated with <b>Username</b>.": "",
"Enter the password for the SMTP server. Only plain ASCII characters are accepted.": "",
"Enter the password used to connect to the IPMI interface from a web browser.": "",
"Enter the phone number of the contact person.": "",
"Enter the pre-Windows 2000 domain name.": "",
"Enter the pre-defined S3 bucket to use.": "",
"Enter the relative distinguished name of the site object in the Active Directory.": "",
"Enter the state or province of the organization.": "",
"Enter the subject for status emails.": "",
"Enter the user on the VMware host with permission to snapshot virtual machines.": "",
"Enter the username if the SMTP server requires authentication.": "",
"Enter the version to roll back to.": "",
"Enter vm name to continue.": "",
"Enter zvol name to continue.": "",
"Enter {value} below to confirm.": "",
"Entering <i>0</i> uses the actual file size and requires that the file already exists. Otherwise, specify the file size for the new file.": "",
"Environment": "",
"Error": "",
"Error In Apps Service": "",
"Error Updating Production Status": "",
"Error checking for updates.": "",
"Error counting eligible snapshots.": "",
"Error creating device": "",
"Error deleting dataset {datasetName}.": "",
"Error details for ": "",
"Error detected reading App": "",
"Error exporting the Private Key": "",
"Error exporting the certificate": "",
"Error exporting/disconnecting pool.": "",
"Error getting chart data": "",
"Error importing pool": "",
"Error occurred": "",
"Error restarting web service": "",
"Error saving ZVOL.": "",
"Error starting service {serviceName}.": "",
"Error stopping service {serviceName}.": "",
"Error submitting file": "",
"Error updating disks": "",
"Error validating pool name": "",
"Error validating target name": "",
"Error:": "",
"Error: ": "",
"Errors": "",
"Est. Usable Raw Capacity": "",
"Establishing a connection requires that one of the connection systems has open TCP ports. Choose which system (<i>LOCAL</i> or <i>REMOTE</i>) will open ports. Consult your IT department to determine which systems are allowed to open ports.": "",
"Estimated Raw Capacity": "",
"Estimated data capacity available after extension.": "",
"Estimated total raw data capacity": "",
"Event": "",
"Event Data": "",
"Everything is fine": "",
"Example: blob.core.usgovcloudapi.net": "",
"Excellent effort": "",
"Exclude": "",
"Exclude Child Datasets": "",
"Exclude specific child dataset snapshots from the replication. Use with <b>Recursive</b> snapshots. List child dataset names to exclude. Separate entries by pressing <code>Enter</code>. Example: <i>pool1/dataset1/child1</i>. A recursive replication of <i>pool1/dataset1</i> snapshots includes all child dataset snapshots except <i>child1</i>.": "",
"Exclude specific child datasets from the snapshot. Use with recursive snapshots. List paths to any child datasets to exclude. Example: <i>pool1/dataset1/child1</i>. A recursive snapshot of <i>pool1/dataset1</i> will include all child datasets except <i>child1</i>. Separate entries by pressing <code>Enter</code>.": "",
"Exec": "",
"Execute": "",
"Existing Pool": "",
"Existing presets": "",
"Expand": "",
"Expand Row": "",
"Expand pool ": "",
"Expand pool to fit all available disk space.": "",
"Expand row": "",
"Expander Status": "",
"Expected Finished Time:": "",
"Expiration Date": "",
"Export": "",
"Export All Keys": "",
"Export As {fileType}": "",
"Export Key": "",
"Export Password Secret Seed": "",
"Export Read Only": "",
"Export Recycle Bin": "",
"Export ZFS snapshots as <a href=\"https://docs.microsoft.com/en-us/windows/desktop/vss/shadow-copies-and-shadow-copy-sets\" target=_blank>Shadow Copies</a> for VSS clients.": "",
"Export/Disconnect": "",
"Export/Disconnect Pool": "",
"Export/disconnect pool: {pool}": "",
"Exported": "",
"Exporters": "",
"Exporting Pool": "",
"Exporting/disconnecting will continue after services have been managed.": "",
"Expose zilstat via SNMP": "",
"Extend": "",
"Extend Vdev": "",
"Extend session": "",
"Extended Key Usage": "",
"Extends the validity of OTP by that many windows of intervals before and after the current interval": "",
"Extent": "",
"Extent Name": "",
"Extent Type": "",
"Extents": "",
"Extra Constraints": "",
"Extra Users": "",
"FAULT": "",
"FRONT": "",
"FTP": "",
"FTP Host to connect to. Example: <i>ftp.example.com</i>.": "",
"FTP Port number. Leave blank to use the default port <i>21</i>.": "",
"Failed": "",
"Failed Authentication: {credentials}": "",
"Failed Disks": "",
"Failed S.M.A.R.T. Tests": "",
"Failed sending test alert!": "",
"Failover": "",
"Failover Configuration": "",
"Failover Group": "",
"Failover Read": "",
"Failover Write": "",
"Failover is administratively disabled.": "",
"Failover is in an error state.": "",
"Faulted": "",
"Features": "",
"Feb": "",
"Feedback Type": "",
"Fenced is not running.": "",
"Fetch DataStores": "",
"Fetching Encryption Summary": "",
"Fetching Encryption Summary for ": "",
"Fetching data...": "",
"Field is required": "",
"File": "",
"File ID": "",
"File Inherit": "",
"File Mask": "",
"File Permissions": "",
"File Ticket": "",
"File size is limited to {n} MiB.": "",
"File: {filename}": "",
"Filename": "",
"Filename Encryption": "",
"Files are split into chunks of this size before upload. The number of chunks that can be simultaneously transferred is set by the <b>Transfers</b> number. The single largest file being transferred must fit into no more than 10,000 chunks.": "",
"Files that are deleted from the same dataset are moved to the Recycle Bin and do not take any additional space. <b>Deleting files over NFS will remove the files permanently </b>. When the files are in a different dataset or a child dataset, they are copied to the dataset where the Recycle Bin is located. To prevent excessive space usage, files larger than 20 MiB are deleted rather than moved. <b>This is not a replacement for ZFS snapshots.</b>": "",
"Filesize": "",
"Filesystem": "",
"Filesystem Attrs Read": "",
"Filesystem Attrs Write": "",
"Filesystem Data Read": "",
"Filesystem Data Write": "",
"Filesystem Full Control": "",
"Filter": "",
"Filter Groups": "",
"Filter Users": "",
"Filter by Disk Size": "",
"Filter by Disk Type": "",
"Filter {item}": "",
"Filters": "",
"Finding Pools": "",
"Finding pools to import...": "",
"Finished": "",
"Finished Resilver on {date}": "",
"Finished Scrub on {date}": "",
"Fix Credential": "",
"Fix database": "",
"Flags": "",
"Flags Advanced": "",
"Flags Basic": "",
"Flags Type": "",
"Flash Identify Light": "",
"Folder": "",
"Follow Symlinks": "",
"Follow symlinks and copy the items to which they link.": "",
"Following container images are available to update:\n": "",
"For example if you set this value to 5, system will renew certificates that expire in 5 days or less.": "",
"Force": "",
"Force Clear": "",
"Force Create": "",
"Force Delete": "",
"Force Delete?": "",
"Force Stop After Timeout": "",
"Force delete": "",
"Force deletion of dataset <i>{datasetName}</i>?": "",
"Force size": "",
"Force the VM to stop if it has not already stopped within the specified shutdown timeout. Without this option selected, the VM will receive the shutdown signal, but may or may not complete the shutdown process.": "",
"Force unmount": "",
"Force using <a href=\"https://docs.aws.amazon.com/general/latest/gr/signature-version-2.html\" target=\"_blank\">Signature Version 2</a> to sign API requests. Set this when configuring a custom Endpoint URL.": "",
"Forces the addition of the <b>NTP</b> server, even if it is currently unreachable.": "",
"Forcing the other TrueNAS controller to become active requires a failover. This will temporarily interrupt system services. After confirmation, <b>SAVE AND FAILOVER</b> must be clicked on the previous screen.": "",
"Free": "",
"Free Space": "",
"FreeBSD": "",
"Frequency": "",
"Fri": "",
"Friday": "",
"From": "",
"From Email": "",
"From Name": "",
"From a key file": "",
"From {task_begin} to {task_end}": "",
"Full": "",
"Full Admin": "",
"Full Control": "",
"Full Filesystem Replication": "",
"Full Name": "",
"Full path to the pool, dataset or directory to share. The path must reside within a pool. Mandatory.": "",
"Full with random data": "",
"Full with zeros": "",
"GID": "",
"GPU": "",
"GPUs": "",
"GUI": "",
"GUI SSL Certificate": "",
"GUI Settings": "",
"Gateway": "",
"Gathering data...": "",
"General": "",
"General Info": "",
"General Options": "",
"Generate": "",
"Generate Debug File": "",
"Generate Encryption Key": "",
"Generate Key": "",
"Generate Keypair": "",
"Generate New": "",
"Generate a name for the snapshot using the naming schema from a previously created <b>Periodic Snapshot Task</b>. This allows the snapshot to be replicated. Cannot be used with a <i>Name</i>.": "",
"Generate an alert when the pool has this percent space remaining. This is typically configured at the pool level when using zvols or at the extent level for both file and device based extents.": "",
"Generate idmap low range based on same algorithm that SSSD uses by default.": "",
"Generic": "",
"Generic dataset suitable for any share type.": "",
"Get Support": "",
"Give your exporter configuration a name": "",
"Gives control of how much of the new device is made available to ZFS. Set to use the entire capacity of the new device.": "",
"Global 2FA": "",
"Global Configuration": "",
"Global SED Password": "",
"Global Two Factor Authentication": "",
"Global Two Factor Authentication Settings": "",
"Global password to unlock SEDs.": "",
"Gmail credentials have been applied.": "",
"Go Back": "",
"Go To Encryption Root": "",
"Go To Network Settings": "",
"Go back to the previous form": "",
"Go to ACL Manager": "",
"Go to Active Directory Form": "",
"Go to Datasets": "",
"Go to HA settings": "",
"Go to Storage": "",
"Google Cloud Storage": "",
"Google Drive": "",
"Google Photos": "",
"Group": "",
"Group Bind Path": "",
"Group Configuration": "",
"Group Data Quota ": "",
"Group ID": "",
"Group ID created in Authorized Access. Required when the Discovery Authentication Method is set to CHAP or Mutual CHAP.": "",
"Group Obj": "",
"Group Object Quota": "",
"Group Quotas": "",
"Group added": "",
"Group deleted": "",
"Group members": "",
"Group to which this ACL entry applies.": "",
"Group updated": "",
"Group:": "",
"Groupname": "",
"Groups": "",
"Groups could not be loaded": "",
"Groups that can log in using password": "",
"Guest Account": "",
"Guest Operating System": "",
"Guide": "",
"HA Disabled": "",
"HA Enabled": "",
"HA Status": "",
"HA is administratively disabled.": "",
"HA is disabled": "",
"HA is enabled": "",
"HA is enabled.": "",
"HA is in a faulted state": "",
"HA is reconnecting": "",
"HA is reconnecting.": "",
"HDD Standby": "",
"HEX": "",
"HTTP": "",
"HTTP Proxy": "",
"HTTP Proxy:": "",
"HTTP host URL.": "",
"HTTPS Protocols": "",
"Hardware": "",
"Hardware Disk Encryption": "",
"Has Allow List": "",
"Healthy": "",
"Helm Chart Info": "",
"Help": "",
"Hidden": "",
"Hidden columns are not available for sorting or filtering. Hiding columns improves performance.": "",
"Hide": "",
"Hide Extra Columns": "",
"Hide Standard Error": "",
"Hide Standard Output": "",
"Hide Stderr": "",
"Hide Stdout": "",
"Hide error output (stderr) from the command. When unset, any error output is mailed to the user account cron used to run the command.": "",
"Hide from MSR": "",
"Hide standard output (stdout) from the command. When unset, any standard output is mailed to the user account cron used to run the command.": "",
"High Bandwidth (16)": "",
"Highest Temperature": "",
"Highest Usage": "",
"Highest Usage:": "",
"Highest port number of the active side listen address that is open to connections. The first available port between the minimum and maximum is used.": "",
"History": "",
"Hold": "",
"Home Directory": "",
"Home Directory Permissions": "",
"Homepage": "",
"Host": "",
"Host Model": "",
"Host Mounts": "",
"Host Name Database": "",
"Host Passthrough": "",
"Host Sync": "",
"Host name of second TrueNAS controller.": "",
"Host name or IP address of the central key server.": "",
"Host: {host}": "",
"Hostname": "",
"Hostname (TrueNAS Controller 2)": "",
"Hostname (Virtual)": "",
"Hostname Database:": "",
"Hostname and Domain": "",
"Hostname or IP address used to connect to the active side system. When the active side is <i>LOCAL</i>, this defaults to the <i>SSH_CLIENT</i> environment variable. When the active side is <i>REMOTE</i>, this defaults to the SSH connection hostname.": "",
"Hostname or IP address of SMTP server to use for sending this email.": "",
"Hostname or IP address of the remote system.": "",
"Hostname or IP address of the remote system. A valid URL scheme is required. Example: <b>https://<i>10.231.3.76</i></b>": "",
"Hostname or IP address of the system to receive SNMP trap notifications.": "",
"Hostname:": "",
"Hostname: {hostname}": "",
"Hostnames or IP addresses of the ISNS servers to be registered with the iSCSI targets and portals of the system. Separate entries by pressing <code>Enter</code>.": "",
"Hosts": "",
"Hosts Allow": "",
"Hosts Deny": "",
"Hot Spare": "",
"Hottest": "",
"Hottest:": "",
"Hour and minute the system must stop creating snapshots. Snapshots already in progress will continue until complete.": "",
"Hour and minute when the system can begin taking snapshots.": "",
"Hour(s)": "",
"Hours": "",
"Hours when this task will run.": "",
"Hours/Days": "",
"How long a snapshot remains on the destination system. Enter a number and choose a measure of time from the drop-down.": "",
"How many non-self-issued intermediate certificates that can follow this certificate in a valid certification path. Entering <i>0</i> allows a single additional certificate to follow in the certificate path. Cannot be less than <i>0</i>.": "",
"How often to run the scrub task. Choose one of the presets or choose <i>Custom</i> to use the advanced scheduler.": "",
"How permissions are applied to the share. <i>Allowed</i> denies all permissions by default except those that are manually defined. <i>Denied</i> allows all permissions by default except those that are manually defined.": "",
"How the <i>Permissions</i> are applied to the chosen <i>Who</>. Choose <i>Allow</i> to grant the specified permissions and <i>Deny</i> to restrict the specified permissions.": "",
"How the dataset is secured. Choose between securing with an encryption <i>Key</i> or a user-defined <i>Passphrase</i>. Creating a new key file invalidates any previously downloaded key file for this dataset. Delete any previous key file backups and back up the new key file.": "",
"How this ACE is applied to newly created directories and files within the dataset. Basic flags enable or disable ACE inheritance. Advanced flags allow further control of how the ACE is applied to files and directories in the dataset.": "",
"How to configure the connection:<br><br> <i>Manual</i> requires configuring authentication on the remote system. This can include copying SSH keys and modifying the <i>root</i> user account on that system.<br><br> <i>Semi-automatic</i> only works when configuring an SSH connection with a remote TrueNAS system. This method uses the URL and login credentials of the remote system to connect and exchange SSH keys.": "",
"How would you rate this page?": "",
"Hubic": "",
"I Agree": "",
"I Understand": "",
"I understand": "",
"I would like to": "",
"IBurst": "",
"ID": "",
"IGNORE": "",
"INFO": "",
"INTERNAL": "",
"IP": "",
"IP Address": "",
"IP Addresses": "",
"IP address of the remote system with <i>UPS Mode</i> set as <i>Master</i>. Enter a valid IP address in the format <i>192.168.0.1</i>.": "",
"IP address on which the connection <b>Active Side</b> listens. Defaults to <i>0.0.0.0</i>.": "",
"IP addresses and networks that are allowed to use API and UI. If this list is empty, then all IP addresses are allowed to use API and UI.": "",
"IPMI": "",
"IPMI Configuration": "",
"IPMI Events": "",
"IPMI Password Reset": "",
"IPMI Read": "",
"IPMI Write": "",
"IPv4": "",
"IPv4 Address": "",
"IPv4 Default Gateway": "",
"IPv4 Netmask": "",
"IPv6": "",
"IPv6 Default Gateway": "",
"ISNS Servers": "",
"ISO save location": "",
"Icon URL": "",
"Identification": "",
"Identifier": "",
"Identifier and Type": "",
"Identify Drive": "",
"Identify light is now flashing.": "",
"Identify light is now off.": "",
"Identify the purpose for this public key. Typically used for end entity certificates. Multiple usages can be selected. Do not mark this extension critical when the <i>Usage</i> is <i>ANY_EXTENDED_KEY_USAGE</i>.<br><br> Using both <b>Extended Key Usage</b> and <b>Key Usage</b> extensions requires that the purpose of the certificate is consistent with both extensions. See <a href=\"https://www.ietf.org/rfc/rfc3280.txt\" target=\"_blank\">RFC 3280, section 4.2.1.13</a> for more details.": "",
"Identify this certificate as a Certificate Authority (CA).": "",
"Identify this extension as critical for the certificate. Critical extensions must be recognized by the certificate-using system or this certificate will be rejected. Extensions identified as <i>not</i> critical can be ignored by the certificate-using system and the certificate still approved.": "",
"Idle": "",
"Idmap": "",
"Idmap Backend": "",
"If checked, disks of the selected size or larger will be used. If unchecked, only disks of the selected size will be used.": "",
"If downloading a file returns the error \"This file has been identified as malware or spam and cannot be downloaded\" with the error code \"cannotDownloadAbusiveFile\" then enable this flag to indicate you acknowledge the risks of downloading the file and TrueNAS will download it anyway.": "",
"If selected, sets several environment variables.": "",
"If set when troubleshooting a connection, logs more verbosely.": "",
"If set, the DNS name of the client must resolve to its IP address and the cert must contain the same DNS name.": "",
"If set, the client certificate must contain the IP address that matches the IP address of the client.": "",
"If set, the password of the user can be sent unencrypted.": "",
"If set, the user home directory is checked for a <b>.tlslogin</b> file which contains one or more PEM-encoded certificates. If not found, the user is prompted for password authentication.": "",
"If the <i>Hex key</i> type is chosen, an encryption key will be auto-generated.": "",
"If the IPMI out-of-band management interface is on a different VLAN from the management network, enter the IPMI VLAN.": "",
"If the destination system has snapshots but they do not have any data in common with the source snapshots, destroy all destination snapshots and do a full replication. <b>Warning:</b> enabling this option can cause data loss or excessive data transfer if the replication is misconfigured.": "",
"If {vmName} is still running, the Guest OS did not respond as expected. It is possible to use <i>Power Off</i> or the <i>Force Stop After Timeout</i> option to stop the VM.": "",
"Ignore Builtin": "",
"Ignore List": "",
"Image ID": "",
"Image Name": "",
"Image Size": "",
"Image Tag": "",
"Images ( to be updated )": "",
"Immediately connect to TrueCommand.": "",
"Implementation Domain": "",
"Implementation Name": "",
"Import": "",
"Import CA": "",
"Import Certificate": "",
"Import Certificate Signing Request": "",
"Import Pool": "",
"Import the private key from an existing SSH keypair or select <i>Generate New</i> to create a new SSH key for this credential.": "",
"Importing Pool": "",
"Importing Pool...": "",
"Importing pools.": "",
"In": "",
"In KiBs or greater. A default of <i>0 KiB</i> means unlimited. ": "",
"In Progress": "",
"In order for dRAID to overweight its benefits over RaidZ the minimum recommended number of disks per dRAID vdev is 10.": "",
"In some cases it's possible that the provided key/passphrase is valid but the path where the dataset is supposed to be mounted after being unlocked already exists and is not empty. In this case, unlock operation would fail. This can be overridden by Force flag. When it is set, system will rename the existing directory/file path where the dataset should be mounted resulting in successful unlock of the dataset.": "",
"Include Audit Logs": "",
"Include Dataset Properties": "",
"Include dataset properties with the replicated snapshots.": "",
"Include snapshots with the name": "",
"Incoming / Outgoing network traffic": "",
"Incoming [{networkInterfaceName}]": "",
"Incorrect Password": "",
"Incorrect crontab value.": "",
"Incorrect or expired OTP. Please try again.": "",
"InfluxDB time series name for collected points.": "",
"Info": "",
"Information": "",
"Informational": "",
"Inherit": "",
"Inherit (encrypted)": "",
"Inherit (non-encrypted)": "",
"Inherit ({value})": "",
"Inherit Encryption": "",
"Inherit Only": "",
"Inherit domain from DHCP": "",
"Inherit encryption properties from parent": "",
"Inherit from DHCP": "",
"Inherited": "",
"Inherited Quotas": "",
"Init/Shutdown Script created": "",
"Init/Shutdown Script updated": "",
"Init/Shutdown Scripts": "",
"Initial Deployment/Setup": "",
"Initial secret authentication key. When an authentication key is not set, no <i>Authentication Protocol</i> is used. If an authentication key is set and an <i>Authentication Protocol</i> is not specified, <a href=\"https://en.wikipedia.org/wiki/MD5\" target=\"_blank\">MD5</a> is used as the default.<br> Must be at least 8 and at most 32 octets long.": "",
"Initial secret encryption key. If an encryption key is not set, no <i>Encryption Protocol</i> is used. If an encryption key is set and an <i>Encryption Protocol</i> is not specified, <a href=\"https://en.wikipedia.org/wiki/Data_Encryption_Standard\" target=\"_blank\">DES</a> is used as the default.<br> Must be at least 8 and at most 32 octets long.": "",
"Initializing Apps Service": "",
"Initiate Failover": "",
"Initiator": "",
"Initiator Group ID": "",
"Initiators": "",
"Initiators Groups": "",
"Initiators currently connected to the system. Shown in IQN format with an IP address. Set initiators and click an <b>-></b> (arrow) to add the initiators to either the <i>Allowed Initiators</i> or <i>Authorized Networks</i> lists. Clicking <i>Refresh</i> updates the <i>Connected Initiators</i> list.": "",
"Input the pre-defined container to use.": "",
"Inquiry": "",
"Insensitive": "",
"Inspect VDEVs": "",
"Install": "",
"Install Another Instance": "",
"Install Application": "",
"Install Manual Update File": "",
"Installation Media": "",
"Installed": "",
"Installed Apps": "",
"Installed Catalogs": "",
"Installer image file": "",
"Installing": "",
"Interface": "",
"Interface Settings": "",
"Interface changes reverted.": "",
"Interfaces": "",
"Interfaces marked <i>critical</i> are considered necessary for normal operation. When the last critical interface in a failover group is preempted by the other storage controller through the VRRP or CARP protocols, a failover is triggered.": "",
"Intermediate CA": "",
"Internal CA": "",
"Internal Certificate": "",
"Internal identifier for the authenticator.": "",
"Internal identifier of the certificate. Only alphanumeric characters, dash (<b>-</b>), and underline (<b>_</b>) are allowed.": "",
"Internal identifier of the certificate. Only alphanumeric, \"_\" and \"-\" are allowed.": "",
"Internetwork control": "",
"Invalid IP address": "",
"Invalid Pod name": "",
"Invalid cron expression": "",
"Invalid file": "",
"Invalid format or character": "",
"Invalid format. Expected format: <property>=<value>": "",
"Invalid image": "",
"Invalid network address list. Check for typos or missing CIDR netmasks and separate addresses by pressing <code>Enter</code>.": "",
"Invalid pool name": "",
"Invalid pool name (please refer to <a href=\"https://openzfs.github.io/openzfs-docs/man/8/zpool-create.8.html#DESCRIPTION\" target=\"_blank\">the documentation</a> for valid rules for pool name)": "",
"Invalid value. Missing numerical value or invalid numerical value/unit.": "",
"Invalid value. Must be greater than or equal to ": "",
"Invalid value. Must be less than or equal to ": "",
"Invalid value. Valid values are numbers followed by optional unit letters, like <code>256k</code> or <code>1 G</code> or <code>2 MiB</code>.": "",
"Invisible": "",
"Is planned to be automatically destroyed at {datetime}": "",
"Isolated GPU Device(s)": "",
"Isolated GPU PCI Ids": "",
"Issuer": "",
"It is not recommended to create a pool with VDEVs containing different numbers of disks. Continue?": "",
"It is not recommended to extend a pool with one or more VDEVs containing different numbers of disks. Continue?": "",
"It seems you haven't configured pools yet.": "",
"It seems you haven't setup any SMB Shares yet. Please click the button below to add an SMB Share.": "",
"It seems you haven't setup any {item} yet.": "",
"Item": "",
"Items Delete Failed": "",
"Items deleted": "",
"Items per page": "",
"JBOF Read": "",
"JBOF Write": "",
"Jan": "",
"Job {job} Completed Successfully": "",
"Job {method} Failed": "",
"Jobs": "",
"Jul": "",
"Jun": "",
"KDC": "",
"KMIP": "",
"KMIP Key Status": "",
"KMIP Read": "",
"KMIP Server": "",
"KMIP Write": "",
"KVM implements Hyper-V Enlightenments for Windows guests. These features make Windows think they're running on top of a Hyper-V compatible hypervisor and use Hyper-V specific features. In some cases enabling these Enlightenments might improve usability and performance on the guest.": "",
"Keep": "",
"Keep for": "",
"Keep snapshot for": "",
"Keep the name short and only lowercase. Using a name longer than 63 characters can prevent accessing the block device. Allowed characters: letters, numbers, period (.), dash (-), and colon (:).": "",
"Keep the zvol name short. Using a zvol name longer than 63 characters can prevent accessing the zvol as a device.": "",
"Keep this Boot Environment?": "",
"Kerberos Keytab": "",
"Kerberos Principal": "",
"Kerberos Realm": "",
"Kerberos Realms": "",
"Kerberos Settings": "",
"Kernel": "",
"Key": "",
"Key Agreement": "",
"Key Cert Sign": "",
"Key Encipherment": "",
"Key ID": "",
"Key Length": "",
"Key Type": "",
"Key Usage": "",
"Key Usage Config": "",
"Key for {id}": "",
"Key not set": "",
"Key set": "",
"Keychain Credential Read": "",
"Keychain Credential Write": "",
"Keys Synced": "",
"Keys for {id} datasets": "",
"Keys pending to be synced between KMIP server and TN database were cleared.": "",
"Keywords": "",
"Kubernetes Read": "",
"Kubernetes Settings": "",
"Kubernetes Write": "",
"LACPDU Rate": "",
"LDAP": "",
"LDAP - Primary Domain": "",
"LDAP Domain": "",
"LDAP Realm": "",
"LDAP Server": "",
"LDAP Timeout": "",
"LDAP User DN": "",
"LDAP User DN Password": "",
"LDAP is disabled.": "",
"LDAP server hostnames or IP addresses. Separate entries with an empty space. Multiple hostnames or IP addresses can be entered to create an LDAP failover priority list. If a host does not respond, the next host in the list is tried until a new connection is established.": "",
"LDAP server to use for SID/uid/gid map entries. When undefined, idmap_ldap uses *ldap://localhost/*. Example: <i>ldap://ldap.netscape.com/o=Airius.com</i>.": "",
"LDAP timeout in seconds. Increase this value if a Kerberos ticket timeout occurs.": "",
"LOCAL": "",
"LONG": "",
"LUN ID": "",
"LUN RPM": "",
"Language": "",
"Last 24 hours": "",
"Last 3 days": "",
"Last Resilver": "",
"Last Run": "",
"Last Scan": "",
"Last Scan Duration": "",
"Last Scan Errors": "",
"Last Scrub": "",
"Last Scrub Run": "",
"Last Snapshot": "",
"Last Updated": "",
"Last month": "",
"Last successful": "",
"Last week": "",
"Last {result} Test": "",
"Launch Docker Image": "",
"Layout": "",
"Leave Domain": "",
"Leave Feedback": "",
"Leave at the default of 512 unless the initiator requires a different block size.": "",
"Leave blank to allow all or enter a list of initiator hostnames. Separate entries by pressing <code>Enter</code>.": "",
"Leave empty for default (<a href=\"https://docs.opsgenie.com/docs/api-overview\" target=\"_blank\">OpsGenie API</a>)": "",
"Leave empty or select number of existing portal to use.": "",
"Leaving the domain requires sufficient privileges. Enter your credentials below.": "",
"Legacy": "",
"Legacy AFP Compatibility": "",
"Legacy NetBIOS name server. Advertises the SMB service <i>NetBIOS Name</i>. Can be required for legacy SMB1 clients to discover the server. When advertised, the server appears in <i>Network Neighborhood</i>).": "",
"Legacy feature. <br><br>Allows the share to host user home directories. Each user is given a personal home directory when connecting to the share which is not accessible by other users. This allows for a personal, dynamic share. Only one share can be used as the home share.": "",
"Legacy feature. <br><br>Privileges are the same as the guest account. Guest access is disabled by default in Windows 10 version 1709 and Windows Server version 1903. Additional client-side configuration is required to provide guest access to these clients.<br><br> <i>MacOS clients:</i> Attempting to connect as a user that does not exist in TrueNAS <i>does not</i> automatically connect as the guest account. The <b>Connect As:</b> <i>Guest</i> option must be specifically chosen in MacOS to log in as the guest account. See the <a href=\"https://support.apple.com/guide/mac-help/connect-mac-shared-computers-servers-mchlp1140/\" target=\"_blank\">Apple documentation</a> for more details.": "",
"Legend": "",
"Level": "",
"Level 1 - Minimum power usage with Standby (spindown)": "",
"Level 127 - Maximum power usage with Standby": "",
"Level 128 - Minimum power usage without Standby (no spindown)": "",
"Level 192 - Intermediate power usage without Standby": "",
"Level 254 - Maximum performance, maximum power usage": "",
"Level 64 - Intermediate power usage with Standby": "",
"Libdefaults Auxiliary Parameters": "",
"License": "",
"Licensed Serials": "",
"Lifetime": "",
"Limit": "",
"Limit Pool To A Single Enclosure": "",
"Limit To {name} Enclosure": "",
"Limit replication speed to this number of bytes per second.": "",
"Link Aggregation": "",
"Link Aggregation Interfaces": "",
"Link Aggregation Protocol": "",
"Link aggregation interface": "",
"Linked Service": "",
"Linux": "",
"List any existing dataset properties to remove from the replicated files.": "",
"List of chat IDs": "",
"List of files and directories to exclude from sync.<br> Separate entries by pressing <code>Enter</code>. See <a href=\"https://rclone.org/filtering/\" target=\"_blank\">rclone filtering</a> for more details about the <code>--exclude</code> option.": "",
"List of groups for which to generate audit messages. Keep this list empty to Watch All.": "",
"List of groups to ignore when auditing. If conflict arises between Watch List and Ignore List (based on user group membership), then Watch List will take precedence and ops will be audited.": "",
"Listen": "",
"Load Previous Replication Task": "",
"Load an existing provider configuration.": "",
"Loading": "",
"Loading disks...": "",
"Loading...": "",
"Local": "",
"Local Account": "",
"Local Administrator": "",
"Local Groups": "",
"Local Master": "",
"Local User Download Bandwidth": "",
"Local User Upload Bandwidth: ": "",
"Local Users": "",
"Local heartbeat interface does not exist.": "",
"Local heartbeat interface is down.": "",
"Locality": "",
"Localization": "",
"Localization Settings": "",
"Location": "",
"Lock": "",
"Lock Dataset": "",
"Lock Dataset {datasetName}?": "",
"Lock User": "",
"Locked": "",
"Locked by ancestor": "",
"Locking Dataset": "",
"Locking dataset {datasetName}": "",
"Locks": "",
"Log": "",
"Log Details": "",
"Log Excerpt": "",
"Log In": "",
"Log In To Gmail": "",
"Log In To Provider": "",
"Log Level": "",
"Log Out": "",
"Log Path": "",
"Log VDEVs": "",
"Log in to Gmail to set up Oauth credentials.": "",
"Logged In To Gmail": "",
"Logged In To Jira": "",
"Logged In To Provider": "",
"Logging Level": "",
"Logical Block Size": "",
"Login Attempts": "",
"Login To Jira To Submit": "",
"Login error. Please try again.": "",
"Logout": "",
"Logs": "",
"Long": "",
"Long time ago": "",
"Looking for help?": "",
"Losing the ability to unlock the pool can result in losing all data on the disks with no chance of recovery. Always back up the encryption key file or passphrase for an encrypted pool! The key file for an encrypted pool is secured in the system database and can be exported at any time from the pool options": "",
"Loss of Functionality": "",
"Low Bandwidth (4)": "",
"Low Capacity": "",
"Lowercase alphanumeric characters plus dot (.), dash (-), and colon (:) are allowed. See the <i>Constructing iSCSI names using the iqn.format</i> section of <a href=\"https://tools.ietf.org/html/rfc3721.html\" target=\"_blank\">RFC3721</a>.": "",
"Lowest Temperature": "",
"Lowest Usage:": "",
"Lowest port number of the active side listen address that is open to connections.": "",
"MAC Address": "",
"MOTD Banner": "",
"MOVE": "",
"MTU": "",
"Mac Address": "",
"Machine": "",
"Mail Server Port": "",
"Maintainer": "",
"Major": "",
"Make Destination Dataset Read-only?": "",
"Make the currently active TrueNAS controller the default when both TrueNAS controllers are online and HA is enabled. To change the default TrueNAS controller, unset this option on the default TrueNAS controller and allow the system to fail over. This briefly interrupts system services.": "",
"Manage": "",
"Manage Advanced Settings": "",
"Manage Apps Settings": "",
"Manage Catalogs": "",
"Manage Certificates": "",
"Manage Cloud Sync Tasks": "",
"Manage Configuration": "",
"Manage Container Images": "",
"Manage Credentials": "",
"Manage Datasets": "",
"Manage Devices": "",
"Manage Disks": "",
"Manage Global SED Password": "",
"Manage Group Quotas": "",
"Manage Installed Apps": "",
"Manage NFS Shares": "",
"Manage Replication Tasks": "",
"Manage Rsync Tasks": "",
"Manage S.M.A.R.T. Tasks": "",
"Manage SED Password": "",
"Manage SED Passwords": "",
"Manage SMB Shares": "",
"Manage Services and Continue": "",
"Manage Snapshot Tasks": "",
"Manage Snapshots": "",
"Manage User Quotas": "",
"Manage VM Settings": "",
"Manage ZFS Keys": "",
"Manage iSCSI Shares": "",
"Manage members of {name} group": "",
"Management": "",
"Manual": "",
"Manual Disk Selection": "",
"Manual S.M.A.R.T. Test": "",
"Manual Selection": "",
"Manual Test": "",
"Manual Update": "",
"Manual disk selection allows you to create VDEVs and add disks to those VDEVs individually.": "",
"Manual layout": "",
"Manually Configured VDEVs": "",
"Mapall Group": "",
"Mapall User": "",
"Maproot Group": "",
"Maproot User": "",
"Mar": "",
"Mask": "",
"Masquerade Address": "",
"Matching naming schema": "",
"Matching regular expression": "",
"Matching the fixed size of data, as in a database, may result in better performance.": "",
"Mathematical instruction sets that determine how plaintext is converted into ciphertext. See <a href=\"https://en.wikipedia.org/wiki/Advanced_Encryption_Standard\" target=\"_blank\">Advanced Encryption Standard (AES)</a> for more details.": "",
"Mattermost username.": "",
"Max Poll": "",
"Max dataset nesting in ZFS is limited to 50. We are already at that limit in the parent dataset path. It is not possible to create anymore nested datasets under this path.": "",
"Maximize Dispersal": "",
"Maximize Enclosure Dispersal": "",
"Maximum Passive Port": "",
"Maximum Transmission Unit, the largest protocol data unit that can be communicated. The largest workable MTU size varies with network interfaces and equipment. <i>1500</i> and <i>9000</i> are standard Ethernet MTU sizes. Leaving blank restores the field to the default value of <i>1500</i>.": "",
"Maximum Upload Parts": "",
"Maximum number of replication tasks being executed simultaneously.": "",
"Maximum number of seconds a client is allowed to spend connected, after\nauthentication, without issuing a command which results in creating an active or passive data connection\n(i.e. sending/receiving a file, or receiving a directory listing).": "",
"Maximum number of seconds that proftpd will allow clients to stay connected without receiving\nany data on either the control or data connection.": "",
"Maximum time a graph is stored in months (allowed values are 1-60). Changing this value causes the <i>Confirm RRD Destroy</i> dialog to appear. Changes do not take effect until the existing reporting database is destroyed.": "",
"Maximum value is {max}": "",
"May": "",
"Media Subtype": "",
"Media Type": "",
"Medium Bandwidth (8)": "",
"Mega": "",
"Member Disk": "",
"Member disk": "",
"Members": "",
"Members of this group are local admins and automatically have privileges to take ownership of any file in an SMB share, reset permissions, and administer the SMB server through the Computer Management MMC snap-in.": "",
"Memory": "",
"Memory Reports": "",
"Memory Size": "",
"Memory Usage": "",
"Memory device": "",
"Memory usage of app": "",
"Message": "",
"Message verbosity level in the replication task log.": "",
"Metadata": "",
"Metadata (Special) Small Block Size": "",
"Metadata VDEVs": "",
"Method": "",
"Method Call": "",
"Method of snapshot transfer:<ul> <li><i>SSH</i> is supported by most systems. It requires a previously created connection in <b>System > SSH Connections</b>.</li> <li><i>SSH+NETCAT</i> uses SSH to establish a connection to the destination system, then uses <a href=\"https://github.com/truenas/py-libzfs\" target=\"_blank\">py-libzfs</a> to send an unencrypted data stream for higher transfer speeds. This only works when replicating to a TrueNAS, or other system with <i>py-libzfs</i> installed.</li> <li><i>LOCAL</i> efficiently replicates snapshots to another dataset on the same system without using the network.</li> <li><i>LEGACY</i> uses the legacy replication engine from FreeNAS 11.2 and earlier.</li></ul>": "",
"Metrics": "",
"MiB. Units smaller than MiB are not allowed.": "",
"Microsoft Azure": "",
"Microsoft Onedrive <a href=\"https://docs.microsoft.com/en-us/onedrive/developer/rest-api/getting-started/authentication\" target=\"_blank\">Access Token</a>. Log in to the Microsoft account to add an access token.": "",
"Middleware": "",
"Middleware - Credentials": "",
"Middleware - Method": "",
"Migrate applications to the new pool": "",
"Min Poll": "",
"Minimum": "",
"Minimum Memory": "",
"Minimum Memory Size": "",
"Minimum Passive Port": "",
"Minimum value is 0": "",
"Minimum value is {min}": "",
"Minor": "",
"Minor Version": "",
"Minutes": "",
"Minutes of inactivity before the drive enters standby mode. Temperature monitoring is disabled for standby disks.": "",
"Minutes when this task will run.": "",
"Minutes/Hours": "",
"Minutes/Hours/Days": "",
"Mirror": "",
"Missing group - {gid}": "",
"Missing permissions for this action": "",
"Mixed Capacity": "",
"Mixing disks of different sizes in a vdev is not recommended.": "",
"Mode": "",
"Model": "",
"Model:": "",
"Modify": "",
"Module": "",
"Mon": "",
"Monday": "",
"Monitor": "",
"Monitor Password": "",
"Monitor User": "",
"Month(s)": "",
"Months": "",
"More Options": "",
"More info...": "",
"Move existing keys from the current key server to a new key server. To switch to a different key server, key synchronization must be <i>Enabled</i>, then enable this setting, update the key server connection configuration, and click <b>SAVE</b>.": "",
"Multi-domain support. Enter additional domains to secure. Separate domains by pressing <code>Enter</code> For example, if the primary domain is <i>example.com</i>, entering <i>www.example.com</i> secures both addresses.": "",
"Multicast DNS. Uses the system <i>Hostname</i> to advertise enabled and running services. For example, this controls if the server appears under <i>Network</i> on MacOS clients.": "",
"Multichannel": "",
"Multiprotocol": "",
"Must be part of a pool to check errors": "",
"Must match Windows workgroup name. When this is unconfigured and Active Directory or LDAP are active, TrueNAS will detect and set the correct workgroup from these services.": "",
"Mutual secret password. Required when Peer User is set. Must be different than the <i>Secret</i>.": "",
"N/A": "",
"NAA": "",
"NEW": "",
"NFS": "",
"NFS Sessions": "",
"NFS share created": "",
"NFS share updated": "",
"NFSv3 ownership model for NFSv4": "",
"NFSv4": "",
"NIC": "",
"NIC To Attach": "",
"NOTICE": "",
"NTLMv1 Auth": "",
"NTP Server Settings": "",
"NTP Servers": "",
"Name": "",
"Name And Method": "",
"Name and Naming Schema cannot be provided at the same time.": "",
"Name and Options": "",
"Name and Provider": "",
"Name and Type": "",
"Name must start with an alphabetic character and end with an alphanumeric character. Hyphen is allowed in the middle.": "",
"Name not added": "",
"Name not found": "",
"Name of the InfluxDB database.": "",
"Name of the WebDAV site, service, or software being used.": "",
"Name of the extent. If the <i>Extent size</i> is not <i>0</i>, it cannot be an existing file within the pool or dataset.": "",
"Name of the new alert service.": "",
"Name of the new cloned boot environment. Alphanumeric characters, dashes (-), underscores (_), and periods (.) are allowed.": "",
"Name of the new dataset created from the cloned snapshot.": "",
"Name of the pool is required": "",
"Name of the pool must be correct": "",
"Name of the zvol is required": "",
"Name of the zvol must be correct": "",
"Name of this SSH connection. SSH connection names must be unique.": "",
"Name of this replication configuration.": "",
"Name or Naming Schema must be provided.": "",
"Nameserver (DHCP)": "",
"Nameserver 1": "",
"Nameserver 2": "",
"Nameserver 3": "",
"Nameserver {n}": "",
"Nameservers": "",
"Naming Schema": "",
"NetBIOS": "",
"NetBIOS Alias": "",
"NetBIOS Name": "",
"NetBIOS Name of this NAS. This name must differ from the <i>Workgroup</i> name and be no greater than 15 characters.": "",
"Netcat Active Side": "",
"Netcat Active Side Connect Address": "",
"Netcat Active Side Listen Address": "",
"Netcat Active Side Max Port": "",
"Netcat Active Side Min Port": "",
"Network": "",
"Network General Read": "",
"Network Interface": "",
"Network Interface Read": "",
"Network Interface Write": "",
"Network Reports": "",
"Network Timeout Before Initiating Failover": "",
"Network Widgets": "",
"Network addresses allowed to use this initiator. Leave blank to allow all networks or list network addresses with a CIDR mask. Separate entries by pressing <code>Enter</code>.": "",
"Network addresses allowed use this initiator. Each address can include an optional <a href=\"https://en.wikipedia.org/wiki/Classless_Inter-Domain_Routing\" target=\"_blank\">CIDR</a> netmask. Click <i>+</i> to add the network address to the list. Example: <i>192.168.2.0/24</i>.": "",
"Network changes applied successfully.": "",
"Network community string. The community string acts like a user ID or password. A user with the correct community string has access to network information. The default is <i>public</i>. For more information, see <a href=\"https://community.helpsystems.com/knowledge-base/intermapper/snmp/snmp-community-strings/\" target=\"_blank\">What is an SNMP Community String?</a>.": "",
"Network control (highest)": "",
"Network interface changes have been made permanent.": "",
"Network interface changes have been temporarily applied for testing. Keep changes permanently? Changes are automatically reverted after the testing delay if they are not permanently applied.": "",
"Network interface settings have been temporarily changed for testing. The settings will revert to the previous configuration after {x} seconds unless SAVE CHANGES is chosen to make them permanent.": "",
"Network interface updated": "",
"Network interfaces to include in the bridge.": "",
"Networking": "",
"Networks": "",
"Never": "",
"Never Delete": "",
"New & Updated Apps": "",
"New Devices": "",
"New Disk": "",
"New IPv4 Default Gateway": "",
"New Password": "",
"New Pool": "",
"New Privilege": "",
"New SSH Connection": "",
"New password and confirmation should match.": "",
"New users are not given <b>su</b> permissions if <i>wheel</i> is their primary group.": "",
"Newer Clone": "",
"Newer Intermediate, Child, and Clone": "",
"Next": "",
"Next Run": "",
"No": "",
"No Applications Installed": "",
"No Applications are Available": "",
"No Changelog": "",
"No Communication Warning Time": "",
"No Data": "",
"No Datasets": "",
"No Enclosure Dispersal Strategy": "",
"No Encryption (less secure, but faster)": "",
"No Inherit": "",
"No Isolated GPU Device(s) configured": "",
"No Item": "",
"No Logs": "",
"No Pods Found": "",
"No Pools": "",
"No Pools Found": "",
"No Propagate Inherit": "",
"No S.M.A.R.T. test results": "",
"No S.M.A.R.T. tests have been performed on this disk yet.": "",
"No SMB Shares have been configured yet": "",
"No Safety Check (CAUTION)": "",
"No Search Results.": "",
"No Traffic": "",
"No VDEVs added.": "",
"No active interfaces are found": "",
"No arguments are passed": "",
"No containers are available.": "",
"No descriptor provided": "",
"No disk in slot": "",
"No disks available.": "",
"No e-mail address is set for root user or any other local administrator. Please, configure such an email address first.": "",
"No enclosure": "",
"No errors": "",
"No events are available.": "",
"No events to display.": "",
"No interfaces configured with Virtual IP.": "",
"No items have been added yet.": "",
"No logs are available": "",
"No logs are available for this task.": "",
"No logs yet": "",
"No longer keep this Boot Environment?": "",
"No matching results found": "",
"No network interfaces are marked critical for failover.": "",
"No options": "",
"No pools are configured.": "",
"No pools on this enclosure.": "",
"No ports are being used.": "",
"No records": "",
"No records have been added yet": "",
"No similar apps found.": "",
"No snapshots are available.": "",
"No snapshots sent yet": "",
"No temperature data was reported by the system. There can be a number of reasons why this might occur. For troubleshooting tips please go here": "",
"No unused disks": "",
"No update found.": "",
"No updates available.": "",
"No vdev info for disk.": "",
"No warnings": "",
"No {item}": "",
"Node IP": "",
"Node set allows setting NUMA nodes for multi NUMA processors when CPU set was defined. Better memory locality can be achieved by setting node set based on assigned CPU set. E.g. if cpus 0,1 belong to NUMA node 0 then setting nodeset to 0 will improve memory locality": "",
"Nodes Virtual IP states do not agree.": "",
"None": "",
"None requested": "",
"Normal": "",
"Normal VDEV type, used for primary storage operations. ZFS pools always have at least one DATA VDEV.": "",
"Not Allowed": "",
"Not Available": "",
"Not Set": "",
"Not Shared": "",
"Not enough free space. Maximum available: {space}": "",
"Notes": "",
"Notes about this disk.": "",
"Notes about this extent.": "",
"Notice": "",
"Notifications": "",
"Notransfer Timeout": "",
"Nov": "",
"Now": "",
"Now/Reboot": "",
"Num Pending Deletes": "",
"Number of VDEVs": "",
"Number of bytes": "",
"Number of days to renew certificate before expiring.": "",
"Number of days to retain local audit messages.": "",
"Number of objects that can be owned by each of the selected groups. Entering <code>0</code> (zero) allows unlimited objects.": "",
"Number of objects that can be owned by each of the selected users. Entering <code>0</code> (zero) allows unlimited objects.": "",
"Number of password-based key derivation function 2 (PBKDF2) iterations to use for reducing vulnerability to brute-force attacks. Entering a number larger than <i>100000</i> is required. See <a href=\"https://en.wikipedia.org/wiki/PBKDF2\" target=\"_blank\">PBKDF2</a> for more details.": "",
"Number of points for each hourly, daily, weekly, monthly, or yearly graph (allowed values are 1-4096). Changing this value causes the <i>Confirm RRD Destroy</i> dialog to appear. Changes do not take effect until the existing reporting database is destroyed.": "",
"Number of retries for failed replications": "",
"Number of seconds before a timeout. Increase this value if AD DNS queries time out.": "",
"Number of seconds before timeout. To view the AD connection status, open the interface <i>Task Manager</i>.": "",
"Number of seconds to wait after a network failure before triggering a failover. <i>0</i> means a failover occurs immediately, or after two seconds when the system is using a link aggregation.": "",
"Number of times the replication is attempted before stopping and marking the task as failed.": "",
"Number of virtual CPUs to allocate to the virtual machine. The VM operating system might have operational or licensing restrictions on the number of CPUs.": "",
"OAuth Authentication": "",
"OAuth Client ID": "",
"OAuth Client Secret": "",
"OAuth Token for current session": "",
"OFFLINE": "",
"OK": "",
"ONLINE": "",
"OQ % Used": "",
"OQ Used": "",
"OS Version": "",
"OTHER": "",
"Object Quota": "",
"Oct": "",
"Off": "",
"Off by default. When set, <a href=\"https://www.samba.org/samba/docs/current/man-html/smbd.8.html\" target=\"_blank\">smbd(8)</a> attempts to authenticate users with the insecure and vulnerable NTLMv1 encryption. This setting allows backward compatibility with older versions of Windows, but is not recommended and should not be used on untrusted networks.": "",
"Offline": "",
"Offline Disk": "",
"Offline VDEVs": "",
"Offline disk {name}?": "",
"Offload Read": "",
"Offload Write": "",
"Okay": "",
"On": "",
"On a Different System": "",
"On this System": "",
"Once an enclosure is selected, all other VDEV creation steps will limit disk selection options to disks in the selected enclosure. If the enclosure selection is changed, all disk selections will be reset.": "",
"Once enabled, users will be required to set up two factor authentication next time they login.": "",
"One or more data VDEVs has disks of different sizes.": "",
"One-Time Password (if necessary)": "",
"One-Time Password if two factor authentication is enabled.": "",
"Online": "",
"Online Disk": "",
"Online disk {name}?": "",
"Only Readonly Admin, Sharing Admin or Full Admin roles are supported in WebUI.": "",
"Only Replicate Snapshots Matching Schedule": "",
"Only appears if <i>Device</i> is selected. Select the unused zvol or zvol snapshot.": "",
"Only appears if a <i>File</i> or zvol is selected. When the specified percentage of free space is reached, the system issues an alert.": "",
"Only entered when configuring mutual CHAP. Usually the same value as <i>User</i>.": "",
"Only first {number} examples are shown.": "",
"Only image(s) will be updated": "",
"Only integers allowed": "",
"Only lowercase alphanumeric characters plus dot (.), dash (-), and colon (:) are allowed.": "",
"Only needed when connecting to a Team Drive. The ID of the top level folder of the Team Drive.": "",
"Only numeric ids are allowed.": "",
"Only one can be active at a time.": "",
"Only override the default if the initiator requires a different block size.": "",
"Only replicate snapshots that match a defined creation time. To specify which snapshots will be replicated, set this checkbox and define the snapshot creation times that will be replicated. For example, setting this time frame to <i>Hourly</i> will only replicate snapshots that were created at the beginning of each hour.": "",
"Open": "",
"Open Files": "",
"Open Network": "",
"Open Settings": "",
"Open TrueCommand User Interface": "",
"OpenStack Swift": "",
"Opened at": "",
"Operating System": "",
"Operation": "",
"Operation will change permissions on path: {path}": "",
"Optional description. Portals are automatically assigned a numeric group.": "",
"Optional user-friendly name.": "",
"Optional. Enter a server description.": "",
"Optional. Only needed for private images.": "",
"Optional: CPU Set (Examples: 0-3,8-11)": "",
"Optional: Choose installation media image": "",
"Optional: NUMA nodeset (Example: 0-1)": "",
"Options": "",
"Options cannot be loaded": "",
"Options for encrypting the LDAP connection: <ul> <li><i>OFF:</i> do not encrypt the LDAP connection.</li> <li><i>ON:</i> encrypt the LDAP connection with <i>SSL</i> on port <i>636</i>.</li> <li><i>START_TLS:</i> encrypt the LDAP connection with <i>STARTTLS</i> on the default LDAP port <i>389</i>.</li> </ul>": "",
"Order": "",
"Organization": "",
"Organizational Unit": "",
"Organizational unit of the entity.": "",
"Other": "",
"Other Options": "",
"Other Settings": "",
"Other TrueNAS controller cannot be reached.": "",
"Other TrueNAS controller has no license.": "",
"Other TrueNAS controller has not finished booting.": "",
"Other node is currently processing a failover event.": "",
"Others": "",
"Out": "",
"Outbound Activity": "",
"Outbound Network": "",
"Outbound Network:": "",
"Outgoing Mail Server": "",
"Outgoing [{networkInterfaceName}]": "",
"Overrides default directory creation mask of <i>0777</i> which grants directory read, write and execute access for everybody.": "",
"Overrides default file creation mask of <i>0666</i> which creates files with read and write access for everybody.": "",
"Overview": "",
"Owner": "",
"Owner Group": "",
"Owner:": "",
"PASSPHRASE": "",
"PCI Passthrough Device": "",
"PCI device does not have a reset mechanism defined and you may experience inconsistent/degraded behavior when starting/stopping the VM.": "",
"POSIX": "",
"POSIX Permissions": "",
"PULL": "",
"PUSH": "",
"PagerDuty client name.": "",
"Pair this certificate's public key with the Certificate Authority private key used to sign this certificate.": "",
"Parent": "",
"Parent Interface": "",
"Parent Path": "",
"Parent dataset path (read-only).": "",
"Partition": "",
"Passphrase": "",
"Passphrase and confirmation should match.": "",
"Passphrase value must match Confirm Passphrase": "",
"Passthrough": "",
"Password": "",
"Password Disabled": "",
"Password Login": "",
"Password Login Groups": "",
"Password Server": "",
"Password Servers": "",
"Password and confirmation should match.": "",
"Password associated with the LDAP User DN.": "",
"Password for the Active Directory administrator account. Required the first time a domain is configured. After initial configuration, the password is not needed to edit, start, or stop the service.": "",
"Password for the Bind DN.": "",
"Password for the SSH Username account.": "",
"Password for the user account.": "",
"Password is not set": "",
"Password is set": "",
"Password login enabled": "",
"Password to encrypt and decrypt remote data. <b>Warning:</b> Always securely back up this password! Losing the encryption password will result in data loss.": "",
"Password updated.": "",
"Passwords cannot contain a <b>?</b>. Passwords should be at least eight characters and contain a mix of lower and upper case, numbers, and special characters.": "",
"Passwords do not match": "",
"Paste either or both public and private keys. If only a public key is entered, it will be stored alone. If only a private key is pasted, the public key will be automatically calculated and entered in the public key field. Click <b>Generate Keypair</b> to create a new keypair. Encrypted keypairs or keypairs with passphrases are not supported.": "",
"Paste the <a href=\"https://api.slack.com/incoming-webhooks\" target=\"_blank\">incoming webhook</a> URL associated with this service.": "",
"Paste the certificate for the CA.": "",
"Paste the contents of your Certificate Signing Request here.": "",
"Paste the private key associated with the Certificate when available. Please provide a key at least 1024 bits long.": "",
"Path": "",
"Path Length": "",
"Path Suffix": "",
"Path to the Extent": "",
"Pattern of naming custom snapshots to include in the replication with the periodic snapshot schedule. Enter the <a href=\"https://man7.org/linux/man-pages/man3/strftime.3.html\" target=\"_blank\">strftime(3)</a> strings that match the snapshots to include in the replication.<br><br> When a periodic snapshot is not linked to the replication, enter the naming schema for manually created snapshots. Has the same <i>%Y</i>, <i>%m</i>, <i>%d</i>, <i>%H</i>, and <i>%M</i> string requirements as the <b>Naming Schema</b> in a <b>Periodic Snapshot Task</b>. Separate entries by pressing <code>Enter</code>.": "",
"Pattern of naming custom snapshots to be replicated. Enter the name and <a href=\"https://man7.org/linux/man-pages/man3/strftime.3.html\" target=\"_blank\">strftime(3)</a> <i>%Y</i>, <i>%m</i>, <i>%d</i>, <i>%H</i>, and <i>%M</i> strings that match the snapshots to include in the replication. Separate entries by pressing <code>Enter</code>. The number of snapshots matching the patterns are shown.": "",
"Pause Scrub": "",
"Peer Secret": "",
"Peer Secret (Confirm)": "",
"Peer User": "",
"Pending": "",
"Pending Network Changes": "",
"Pending Sync": "",
"Pending Sync Keys Cleared": "",
"Pending Upgrade": "",
"Percentage of total core utilization": "",
"Percentage used of dataset quota at which to generate a critical alert.": "",
"Percentage used of dataset quota at which to generate a warning alert.": "",
"Perform Reverse DNS Lookups": "",
"Performance": "",
"Performs authentication from an LDAP server.": "",
"Periodic S.M.A.R.T. Tests": "",
"Periodic Snapshot Task": "",
"Periodic Snapshot Tasks": "",
"Permission": "",
"Permissions": "",
"Permissions Advanced": "",
"Permissions Basic": "",
"Permissions Editor": "",
"Permissions Type": "",
"Phone": "",
"Phone Number": "",
"Photo Library API client secret generated from the <a href=\"https://developers.google.com/identity/protocols/oauth2\" target=\"_blank\">Google API Console</a>": "",
"Pin vcpus": "",
"Plain (No Encryption)": "",
"Platform": "",
"Please accept the terms of service for the given ACME Server.": "",
"Please click the button below to create a pool.": "",
"Please describe:\n1. Steps to reproduce\n2. Expected Result\n3. Actual Result": "",
"Please input password.": "",
"Please input user name.": "",
"Please select a tag": "",
"Please specifies tag of the image": "",
"Please specify a valid git repository uri.": "",
"Please specify branch of git repository to use for the catalog.": "",
"Please specify name to be used to lookup catalog.": "",
"Please specify the name of the image to pull. Format for the name is \"registry/repo/image\"": "",
"Please specify trains from which UI should retrieve available applications for the catalog.": "",
"Please visit our support page for help.": "",
"Please wait": "",
"Pod Logs": "",
"Pod Name": "",
"Pod Shell": "",
"Pods": "",
"Pool": "",
"Pool Available Space Threshold (%)": "",
"Pool Creation Wizard": "",
"Pool Disks have {alerts} alerts and {smartTests} failed S.M.A.R.T. tests": "",
"Pool Name": "",
"Pool Options for {pool}": "",
"Pool Scrub Read": "",
"Pool Scrub Write": "",
"Pool Status": "",
"Pool contains {status} Data VDEVs": "",
"Pool created successfully": "",
"Pool has been unset.": "",
"Pool is not healthy": "",
"Pool is using more than {maxPct}% of available space": "",
"Pool options for {poolName} successfully saved.": "",
"Pool status is {status}": "",
"Pool updated successfully": "",
"Pool {name} successfully upgraded.": "",
"Pool/Dataset": "",
"Pools": "",
"Pools in Enclosure": "",
"Port": "",
"Port number on the remote system to use for the SSH connection.": "",
"Port or Hostname": "",
"Portal": "",
"Portal Group ID": "",
"Portals": "",
"Ports": "",
"Post Init": "",
"Post-script": "",
"Power": "",
"Power Management": "",
"Power Mode": "",
"Power Off": "",
"Power Off UPS": "",
"Pre Init": "",
"Pre-script": "",
"Predefined certificate extensions. Choose a profile that best matches your certificate usage scenario.": "",
"Predefined permission combinations:<br><i>Read</i>: Read access and Execute permission on the object (RX).<br><i>Change</i>: Read access, Execute permission, Write access, and Delete object (RXWD).<br><i>Full</i>: Read access, Execute permission, Write access, Delete object, change Permissions, and take Ownership (RXWDPO).<br><br> For more details, see <a href=\"https://www.samba.org/samba/docs/current/man-html/smbcacls.1.html\" target=\"_blank\">smbacls(1)</a>.": "",
"Prefer": "",
"Preferred Trains": "",
"Preserve Extended Attributes": "",
"Preserve Permissions": "",
"Preset": "",
"Preset Name": "",
"Presets": "",
"Prevent source system snapshots that have failed replication from being automatically removed by the <b>Snapshot Retention Policy</b>.": "",
"Prevent the user from logging in or using password-based services until this option is unset. Locking an account is only possible when <b>Disable Password</b> is <i>No</i> and a <b>Password</b> has been created for the account.": "",
"Preview JSON Service Account Key": "",
"Primary Contact": "",
"Primary DNS server.": "",
"Primary Group": "",
"Priority Code Point": "",
"Privacy Passphrase": "",
"Privacy Protocol": "",
"Private Key": "",
"Privileges": "",
"Proactive Support": "",
"Proactive support settings is not available.": "",
"Proceed": "",
"Proceed with upgrading the pool? WARNING: Upgrading a pool is a one-way operation that might make some features of the pool incompatible with older versions of TrueNAS: ": "",
"Product": "",
"Product ID": "",
"Production": "",
"Production status successfully updated": "",
"Profile": "",
"Prohibits writes to this share.": "",
"Promote": "",
"Properties Exclude": "",
"Properties Override": "",
"Prototyping": "",
"Provide helpful notations related to the share, e.g. ‘Shared to everybody’. Maximum length is 120 characters.": "",
"Provide keys/passphrases manually": "",
"Provider": "",
"Provides a plugin interface for Winbind to use varying backends to store SID/uid/gid mapping tables. The correct setting depends on the environment in which the NAS is deployed.": "",
"Provisioning Type": "",
"Provisioning URI (includes Secret - Read only):": "",
"Public IP address or hostname. Set if FTP clients cannot connect through a NAT device.": "",
"Public Key": "",
"Pull": "",
"Pull Image": "",
"Pulling...": "",
"Purpose": "",
"Push": "",
"Quick": "",
"Quiet": "",
"Quota": "",
"Quota (in GiB)": "",
"Quota Fill Critical": "",
"Quota Fill Critical (in %)": "",
"Quota Fill Warning": "",
"Quota Fill Warning (in %)": "",
"Quota critical alert at, %": "",
"Quota for this dataset": "",
"Quota for this dataset and all children": "",
"Quota size is too small, enter a value of 1 GiB or larger.": "",
"Quota warning alert at, %": "",
"Quotas added": "",
"Quotas set for {n, plural, one {# group} other {# groups}}": "",
"Quotas set for {n, plural, one {# user} other {# users}}": "",
"Quotas updated": "",
"RAIDZ1": "",
"RAIDZ2": "",
"RAIDZ3": "",
"RAM": "",
"REAR": "",
"REMOTE": "",
"REQUIRE": "",
"RPM": "",
"Randomly generate an encryption key for securing this dataset. Disabling requires manually defining the encryption key.<br> WARNING: the encryption key is the only means to decrypt the information stored in this dataset. Store the encryption key in a secure location.": "",
"Range High": "",
"Range Low": "",
"Range Low and Range High set the range of UID/GID numbers which this IDMap backend translates. If an external credential like a Windows SID maps to a UID or GID number outside this range, the external credential is ignored.": "",
"Range Size": "",
"Rate this page": "",
"Raw File": "",
"Raw Filesize": "",
"Re-Open": "",
"Re-Open All Alerts": "",
"Read": "",
"Read ACL": "",
"Read Attributes": "",
"Read Data": "",
"Read Errors": "",
"Read Named Attributes": "",
"Read Only": "",
"Read-only": "",
"Readonly Admin": "",
"Realm": "",
"Reboot": "",
"Reboot After Update": "",
"Reboot standby TrueNAS controller": "",
"Rebuild Directory Service Cache": "",
"Recommended Apps": "",
"Recommended block size based on pool topology:": "",
"Recommended number of data disks for optimal space allocation should be power of 2 (2, 4, 8, 16...).": "",
"Recommended when <i>Max. Poll</i> is greater than 10. Only use on personal NTP servers or those under direct control. <b>Do not</b> enable when using public NTP servers.": "",
"Reconnect": "",
"Record SMB service messages up to the specified log level. By default, error and warning level messages are logged.": "",
"Record Size": "",
"Recursive": "",
"Redirect <i>HTTP</i> connections to <i>HTTPS</i>. A <i>GUI SSL Certificate</i> is required for <i>HTTPS</i>. Activating this also sets the <a href=\"https://en.wikipedia.org/wiki/HTTP_Strict_Transport_Security\" target=\"_blank\">HTTP Strict Transport Security (HSTS)</a> maximum age to <i>31536000</i> seconds (one year). This means that after a browser connects to the web interface for the first time, the browser continues to use HTTPS and renews this setting every year.": "",
"Reenter Password": "",
"Referenced": "",
"Refresh": "",
"Refresh All": "",
"Refresh Charts": "",
"Refresh Events": "",
"Refreshing": "",
"Region": "",
"Region Name": "",
"Register": "",
"Register Default Gateway": "",
"Related Kubernetes Events": "",
"Reload now": "",
"Reload the page": "",
"Reload the page for the license to take effect.": "",
"Remaining": "",
"Remote": "",
"Remote Controller": "",
"Remote Encryption": "",
"Remote Host": "",
"Remote Host Key": "",
"Remote Module Name": "",
"Remote Monitor": "",
"Remote Path": "",
"Remote Port": "",
"Remote SSH Port": "",
"Remote machine": "",
"Remote syslog server DNS hostname or IP address. Nonstandard port numbers can be used by adding a colon and the port number to the hostname, like <samp>mysyslogserver:1928</samp>. Log entries are written to local logs and sent to the remote syslog server.": "",
"Remote system SSH key for this system to authenticate the connection. When all other fields are properly configured, click <b>DISCOVER REMOTE HOST KEY</b> to query the remote system and automatically populate this field.": "",
"Remove": "",
"Remove Invalid Quotas": "",
"Remove Keep Flag": "",
"Remove device": "",
"Remove device {name}?": "",
"Remove file": "",
"Remove file?": "",
"Remove the ACL and permissions from child datasets of the current dataset": "",
"Remove the existing API key and generate a new random key. A dialog shows the new key and has an option to copy the key. Back up and secure the API key! The key string is displayed only one time, at creation.": "",
"Remove this error to try again": "",
"Removed": "",
"Removes the ACL and permissions recursively from all child datasets of the current dataset, including all directories and files contained within those child datasets. This can make data inaccessible until new permissions are created.": "",
"Rename": "",
"Rename Boot Environment": "",
"Renew": "",
"Renew 2FA Secret": "",
"Renew Certificate Days": "",
"Renew Certificate Days Before Expiry": "",
"Renew Secret": "",
"Renewing the secret will cause a new URI and a new QR code to be generated, making it necessary to update your two-factor device or app.": "",
"Reorder": "",
"Replace": "",
"Replace Disk": "",
"Replace existing dataset properties with these new defined properties in the replicated files.": "",
"Replacing Boot Pool Disk": "",
"Replacing Disk": "",
"Replacing disk {name}": "",
"Replacing disk...": "",
"Replicate Custom Snapshots": "",
"Replicate Specific Snapshots": "",
"Replicate all child dataset snapshots. When set, <b>Exclude Child Datasets</b> becomes available.": "",
"Replicate snapshots that have not been created by an automated snapshot task. Requires setting a naming schema for the custom snapshots.": "",
"Replicate «{name}» now?": "",
"Replication": "",
"Replication <i>{name}</i> has started.": "",
"Replication Admin": "",
"Replication Schedule": "",
"Replication Task": "",
"Replication Task Config Read": "",
"Replication Task Config Write": "",
"Replication Task Read": "",
"Replication Task Wizard": "",
"Replication Task Write": "",
"Replication Task Write Pull": "",
"Replication Tasks": "",
"Replication Tasks Limit": "",
"Replication from scratch": "",
"Replication task created.": "",
"Replication task saved.": "",
"Replication «{name}» has started.": "",
"Report a bug": "",
"Report history is cleared when <i>Graph Age</i>, or <i>Graph Points</i> are changed.": "",
"Report if drive temperature is at or above this temperature in Celsius. <i>0</i> disables the report.": "",
"Report if the temperature of a drive has changed by this many degrees Celsius since the last report. <i>0</i> disables the report.": "",
"Reporting": "",
"Reporting Exporters": "",
"Reporting Read": "",
"Reporting Write": "",
"Reports": "",
"Repository": "",
"Requested action performed for selected Applications": "",
"Require IDENT Authentication": "",
"Require Kerberos for NFSv4": "",
"Required unless <b>Enable password login</b> is <i>No</i>. Passwords cannot contain a <b>?</b>.": "",
"Reservation": "",
"Reservation (in GiB)": "",
"Reserved for Dataset": "",
"Reserved for Dataset & Children": "",
"Reserved space for this dataset": "",
"Reserved space for this dataset and all children": "",
"Reset": "",
"Reset Config": "",
"Reset Configuration": "",
"Reset Search": "",
"Reset Step": "",
"Reset Zoom": "",
"Reset configuration": "",
"Reset system configuration to default settings. The system will restart to complete this operation. You will be required to reset your password.": "",
"Reset to Defaults": "",
"Reset to default": "",
"Resetting interfaces while HA is enabled is not allowed.": "",
"Resetting system configuration to default settings. The system will restart.": "",
"Resetting. Please wait...": "",
"Resilver Priority": "",
"Resilver configuration saved": "",
"Resilvering": "",
"Resilvering Status": "",
"Resilvering pool: ": "",
"Resilvering:": "",
"Resolution": "",
"Restart": "",
"Restart SMB Service": "",
"Restart SMB Service?": "",
"Restart Service": "",
"Restart Web Service": "",
"Restart is recommended after changing this setting": "",
"Restart is recommended for new FIPS setting to take effect. Would you like to restart now?“": "",
"Restart the system?": "",
"Restore": "",
"Restore Cloud Sync Task": "",
"Restore Default": "",
"Restore Replication Task": "",
"Restrict PAM": "",
"Restrict share visibility to users with read or write access to the share. See the <a href=\"https://www.samba.org/samba/docs/current/man-html/smb.conf.5.html\" target=_blank>smb.conf</a> manual page.": "",
"Restricted": "",
"Resume Scrub": "",
"Retention": "",
"Retention (in days)": "",
"Return to pool list": "",
"Revert Changes": "",
"Revert Network Interface Changes": "",
"Revert interface changes? All changes that are being tested will be lost.": "",
"Review": "",
"Revoke": "",
"Revoke Certificate": "",
"Revoke Certificate Authority": "",
"Revoked": "",
"Revoking Certificate": "",
"Revoking this CA will revoke the complete CA chain. This is a one way action and cannot be reversed. Are you sure you want to revoke this CA?": "",
"Roles": "",
"Roll Back": "",
"Roll back snapshots": "",
"Roll back snapshots of ix_volumes": "",
"Rollback": "",
"Rolling back...": "",
"Root TCP Socket": "",
"Root dataset ACL cannot be edited.": "",
"Root user (not recommended)": "",
"Rotation Rate": "",
"Rotation Rate (RPM)": "",
"Route v4 Gateway": "",
"Route v4 Interface": "",
"Routing Key": "",
"Rsync": "",
"Rsync Mode": "",
"Rsync Tasks": "",
"Rsync task has started.": "",
"Rsync task «{name}» has started.": "",
"Rsync to another server": "",
"Run As Context": "",
"Run As User": "",
"Run Automatically": "",
"Run Manual Test": "",
"Run Now": "",
"Run On a Schedule": "",
"Run Once": "",
"Run job": "",
"Run this job now?": "",
"Run «{name}» Cloud Sync now?": "",
"Run «{name}» Rsync now?": "",
"Running": "",
"S.M.A.R.T.": "",
"S.M.A.R.T. Enabled": "",
"S.M.A.R.T. Extra Options": "",
"S.M.A.R.T. Info for {disk}": "",
"S.M.A.R.T. Options": "",
"S.M.A.R.T. Tasks": "",
"S.M.A.R.T. Test": "",
"S.M.A.R.T. Test Results": "",
"S.M.A.R.T. Test Results of {pk}": "",
"S.M.A.R.T. extra options": "",
"SAN": "",
"SAS Expanders": "",
"SAVE": "",
"SED": "",
"SED Password": "",
"SED password and confirmation should match.": "",
"SED password updated.": "",
"SET": "",
"SFTP": "",
"SFTP Log Facility": "",
"SFTP Log Level": "",
"SHORT": "",
"SHOW EXPANDER STATUS": "",
"SHOW POOLS": "",
"SHOW STATUS": "",
"SID": "",
"SMB": "",
"SMB - Client Account": "",
"SMB - Destination File Path": "",
"SMB - File Handle Type": "",
"SMB - File Handle Value": "",
"SMB - File Path": "",
"SMB - Host": "",
"SMB - Operation Close": "",
"SMB - Operation Create": "",
"SMB - Operation Read": "",
"SMB - Operation Write": "",
"SMB - Primary Domain": "",
"SMB - Result Parsed Value": "",
"SMB - Result Raw Value": "",
"SMB - Result Type": "",
"SMB - Source File Path": "",
"SMB - UNIX Token GID": "",
"SMB - UNIX Token Groups": "",
"SMB - UNIX Token UID": "",
"SMB - Vers Major": "",
"SMB - Vers Minor": "",
"SMB Name": "",
"SMB Service": "",
"SMB multichannel allows servers to use multiple network connections simultaneously by combining the bandwidth of several network interface cards (NICs) for better performance. SMB multichannel does not function if you combine NICs into a LAGG. <a href=\"https://www.truenas.com/docs/scale/scaletutorials/shares/smb/smbmultichannel/\" target=\"_blank\">Read more in docs</a>": "",
"SMB preset sets most optimal settings for SMB sharing.": "",
"SMB/NFSv4": "",
"SMTP Authentication": "",
"SMTP port number. Typically <i>25,465</i> (secure SMTP), or <i>587</i> (submission).": "",
"SNMP": "",
"SNMP Community": "",
"SNMP v3 Options": "",
"SNMP v3 Support": "",
"SNMPv3 Security Model": "",
"SSH": "",
"SSH Connection": "",
"SSH Connection saved": "",
"SSH Connections": "",
"SSH Host to connect to.": "",
"SSH Keypair": "",
"SSH Keypair created": "",
"SSH Keypair updated": "",
"SSH Keypairs": "",
"SSH Keyscan": "",
"SSH Transfer Security": "",
"SSH Username.": "",
"SSH connection from the keychain": "",
"SSH password login enabled": "",
"SSH port number. Leave empty to use the default port <i>22</i>.": "",
"SSH private key stored in user's home directory": "",
"SSL (Implicit TLS)": "",
"SSSD Compat": "",
"SYNC": "",
"Samba Authentication": "",
"Samba Schema (DEPRECATED - see help text)": "",
"Same as Source": "",
"Sat": "",
"Saturday": "",
"Save": "",
"Save ACL as preset": "",
"Save Access Control List": "",
"Save And Failover": "",
"Save And Go To Review": "",
"Save As Preset": "",
"Save Changes": "",
"Save Configuration": "",
"Save Debug": "",
"Save Pending Snapshots": "",
"Save Selection": "",
"Save Without Restarting": "",
"Save and Restart SMB Now": "",
"Save configuration settings from this machine before updating?": "",
"Save current ACL entries as a preset for future use.": "",
"Save network interface changes?": "",
"Save the 'Require Kerberos for NFSv4' value before adding SMP": "",
"Saving Debug": "",
"Saving KMIP Config": "",
"Saving Permissions": "",
"Saving Permissions...": "",
"Scan remote host key.": "",
"Scan this QR Code with your authenticator app of choice. The next time you try to login, you will be asked to enter an One Time Password (OTP) from your authenticator app. This step is extremely important. Without the OTP you will be locked out of this system.": "",
"Schedule": "",
"Schedule Preview": "",
"Scheduled Scrub Task": "",
"Schema": "",
"Schema Mode": "",
"Screenshots": "",
"Script": "",
"Script deleted.": "",
"Script to execute after running sync.": "",
"Script to execute before running sync.": "",
"Scroll to top": "",
"Scrub": "",
"Scrub Boot Pool": "",
"Scrub In Progress:": "",
"Scrub Paused": "",
"Scrub Pool": "",
"Scrub Started": "",
"Scrub Tasks": "",
"Scrub interval (in days)": "",
"Scrub interval set to {scrubIntervalValue} days": "",
"Search": "",
"Search Alert Categories": "",
"Search Input Fields": "",
"Search Results for «{query}»": "",
"Search or enter value": "",
"Secondary Contact": "",
"Secondary DNS server.": "",
"Secondary Email": "",
"Secondary Name": "",
"Secondary Phone Number": "",
"Secondary Title": "",
"Seconds From Last Renew": "",
"Secret": "",
"Secret (Confirm)": "",
"Secret (Read only)": "",
"Secret Access Key": "",
"Secret Access Key for the linked AWS account.": "",
"Secret Authentication Key": "",
"Secret Confirm must match Secret": "",
"Secret Encryption Key": "",
"Secret Key": "",
"Secret and Peer Secret can not be the same.": "",
"Secret and confirmation should match.": "",
"Section Help": "",
"Secure data within this dataset. Data is unusable until unlocked with an encryption key or passphrase. If parent dataset has encryption enabled, it is not possible to disable this option.": "",
"Secure data within this dataset. Data is unusable until unlocked with an encryption key or passphrase. If parent dataset has encryption enabled, it is not possible to disable this option.": "",
"Security": "",
"See <a href=\"https://crypto.stackexchange.com/questions/1190/why-is-elliptic-curve-cryptography-not-widely-used-compared-to-rsa\" target=\"blank\"> Why is elliptic curve cryptography not widely used, compared to RSA?</a> for more information about key types.": "",
"See <i>Public key authentication</i> in <a href=\"https://man7.org/linux/man-pages/man1/ssh.1.html\" target=\"_blank\">SSH/Authentication</a>.": "",
"See the <a href=\"http://networkupstools.org/stable-hcl.html\" target=\"_blank\">Network UPS Tools compatibility list</a> for a list of supported UPS devices.": "",
"Select <i>Bug</i> when reporting an issue or <i>Suggestion</i> when requesting new functionality.": "",
"Select <i>Command</i> for an executable or <i>Script</i> for an executable script.": "",
"Select <i>Create new disk image</i> to create a new zvol on an existing dataset. This is used as a virtual hard drive for the VM. Select <i>Use existing disk image</i> to use an existing zvol or file for the VM.": "",
"Select <i>None</i> or an integer. This value represents the number of existing authorized accesses.": "",
"Select <i>UEFI</i> for newer operating systems or <i>UEFI-CSM</i> (Compatibility Support Mode) for older operating systems that only support BIOS booting. <i>Grub</i> is not recommended but can be used when the other options do not work.": "",
"Select All": "",
"Select Configuration File": "",
"Select Disk Type": "",
"Select Existing Zvol": "",
"Select IP addresses to listen to for NFS requests. Leave empty for NFS to listen to all available addresses. Static IPs need to be configured on the interface to appear on the list.": "",
"Select Image Tag": "",
"Select Pool": "",
"Select Rating": "",
"Select VDEV layout. This is the first step in setting up your VDEVs.": "",
"Select a compression algorithm to reduce the size of the data being replicated. Only appears when <i>SSH</i> is chosen for <i>Transport</i> type.": "",
"Select a dataset for the new zvol.": "",
"Select a dataset or zvol.": "",
"Select a keyboard layout.": "",
"Select a language from the drop-down menu.": "",
"Select a physical interface to associate with the VM.": "",
"Select a pool to import.": "",
"Select a pool, dataset, or zvol.": "",
"Select a power management profile from the menu.": "",
"Select a preset ACL": "",
"Select a preset configuration for the share. This applies predetermined values and disables changing some share options.": "",
"Select a preset schedule or choose <i>Custom</i> to use the advanced scheduler.": "",
"Select a preset schedule or choose <i>Custom</i> to use the advanced scheduler.": "",
"Select a previously imported or created CA.": "",
"Select a saved remote system SSH connection or choose <i>Create New</i> to create a new SSH connection.": "",
"Select a schedule preset or choose <i>Custom</i> to open the advanced scheduler.": "",
"Select a schedule preset or choose <i>Custom</i> to open the advanced scheduler. Note that an in-progress cron task postpones any later scheduled instance of the same task until the running task is complete.": "",
"Select a schedule preset or choose <i>Custom</i> to open the advanced scheduler.": "",
"Select a schema when Samba Schema is set.": "",
"Select a screen resolution to use for VNC sessions.": "",
"Select a sector size in bytes. <i>Default</i> leaves the sector size unset and uses the ZFS volume values. Setting a sector size changes both the logical and physical sector size.": "",
"Select a time zone.": "",
"Select a user account to run the command. The user must have permissions allowing them to run the command or script.": "",
"Select action": "",
"Select an IP address to use for VNC sessions.": "",
"Select an existing CSR.": "",
"Select an existing SSH connection to a remote system or choose <i>Create New</i> to create a new SSH connection.": "",
"Select an existing SSH connection to a remote system or choose Create New to create a new SSH connection.": "",
"Select an existing extent.": "",
"Select an existing portal or choose <i>Create New</i> to configure a new portal.": "",
"Select an existing realm that was added in <b>Directory Services > Kerberos Realms</b>.": "",
"Select an existing target.": "",
"Select an unused disk to add to this vdev. <br>WARNING: any data stored on the unused disk will be erased!": "",
"Select desired disk type.": "",
"Select disks you want to use": "",
"Select images you want attach to review": "",
"Select interfaces for SSH to listen on. Leave all options unselected for SSH to listen on all interfaces.": "",
"Select one or more screenshots that illustrate the problem.": "",
"Select permissions to apply to the chosen <i>Who</i>. Choices change depending on the <i>Permissions Type</i>.": "",
"Select pool to import": "",
"Select pool, dataset, or directory to share.": "",
"Select the <a href=\"https://man7.org/linux/man-pages/man3/syslog.3.html\" target=\"_blank\">syslog(3)</a> facility of the SFTP server.": "",
"Select the <a href=\"https://man7.org/linux/man-pages/man3/syslog.3.html\" target=\"_blank\">syslog(3)</a> level of the SFTP server.": "",
"Select the Certificate Signing Request to sign the Certificate Authority with.": "",
"Select the Class of Service. The available 802.1p Class of Service ranges from <i>Best effort (default)</i> to <i>Network control (highest)</i>.": "",
"Select the IP addresses to be listened on by the portal. Click ADD to add IP addresses with a different network port. The address <i>0.0.0.0</i> can be selected to listen on all IPv4 addresses, or <i>::</i> to listen on all IPv6 addresses.": "",
"Select the VLAN Parent Interface. Usually an Ethernet card connected to a switch port configured for the VLAN. New link aggregations are not available until the system is restarted.": "",
"Select the appropriate environment.": "",
"Select the appropriate level of criticality.": "",
"Select the certificate of the Active Directory server if SSL connections are used. When no certificates are available, move to the Active Directory server and create a Certificate Authority and Certificate. Import the certificate to this system using the System/Certificates menu.": "",
"Select the cloud storage provider credentials from the list of available Cloud Credentials.": "",
"Select the country of the organization.": "",
"Select the days to run resilver tasks.": "",
"Select the device to attach.": "",
"Select the directories or files to be sent to the cloud for Push syncs, or the destination to be written for Pull syncs. Be cautious about the destination of Pull jobs to avoid overwriting existing files.": "",
"Select the disks to monitor.": "",
"Select the group to control the dataset. Groups created manually or imported from a directory service appear in the drop-down menu.": "",
"Select the interfaces to use in the aggregation.<br> Warning: Link Aggregation creation fails if any of the selected interfaces have been manually configured.<br>The order is important because the FAILOVER lagg protocol will mark the first interface as the \"primary\" interface.": "",
"Select the interfaces to use in the aggregation.<br> Warning: Link Aggregation creation fails if any of the selected interfaces have been manually configured.": "",
"Select the level of severity.": "",
"Select the location of the principal in the keytab created in <b>Directory Services > Kerberos Keytabs</b>.": "",
"Select the minimum priority level to send to the remote syslog server. The system only sends logs matching this level or higher.": "",
"Select the physical interface to associate with the VM.": "",
"Select the pre-defined S3 bucket to use.": "",
"Select the pre-defined container to use.": "",
"Select the script. The script will be run using <a href=\"https://man7.org/linux/man-pages/man1/sh.1p.html\" target=\"_blank\">sh(1)</a>.": "",
"Select the serial port address in hex.": "",
"Select the set of ACE inheritance <i>Flags</i> to display. <i>Basic</i> shows nonspecific inheritance options. <i>Advanced</i> shows specific inheritance settings for finer control.": "",
"Select the shell to use for local and SSH logins.": "",
"Select the system services that will be allowed to communicate externally.": "",
"Select the type of LDAP server to use. This can be the LDAP server provided by the Active Directory server or a stand-alone LDAP server.": "",
"Select the unused zvol or zvol snapshot. Select <i>Create New</i> to create a new zvol.": "",
"Select the user to control the dataset. Users created manually or imported from a directory service appear in the drop-down menu.": "",
"Select the user to run the rsync task. The user selected must have permissions to write to the specified directory on the remote host.": "",
"Select the value or enter a value between <i>0</i> and <i>1023</i>. Some initiators expect a value below <i>256</i>. Leave this field blank to automatically assign the next available ID.": "",
"Select when the command or script runs:<br> <i>Pre Init</i> is early in the boot process, after mounting filesystems and starting networking.<br> <i>Post Init</i> is at the end of the boot process, before TrueNAS services start.<br> <i>Shutdown</i> is during the system power off process.": "",
"Select which existing initiator group has access to the target.": "",
"Selected": "",
"Selected SSH connection uses non-root user. Would you like to use sudo with <i>/usr/sbin/zfs</i> commands? Passwordless sudo must be enabled on the remote system.\nIf not checked, <i>zfs allow</i> must be used to grant non-user permissions to perform ZFS tasks. Mounting ZFS filesystems by non-root still would not be possible due to Linux restrictions.": "",
"Self Healed": "",
"Self-Encrypting Drive": "",
"Self-Encrypting Drive (SED) passwords can be managed with KMIP. Enabling this option allows the key server to manage creating or updating the global SED password, creating or updating individual SED passwords, and retrieving SED passwords when SEDs are unlocked. Disabling this option leaves SED password management with the local system.": "",
"Semi-automatic (TrueNAS only)": "",
"Send Email Status Updates": "",
"Send Mail Method": "",
"Send Test Alert": "",
"Send Test Mail": "",
"Send initial debug": "",
"Sensitive": "",
"Sent: {sent} Received: {received}": "",
"Sep": "",
"Separate multiple values by pressing <code>Enter</code>.": "",
"Separate values with commas, and without spaces.": "",
"Serial": "",
"Serial Port": "",
"Serial Shell": "",
"Serial Speed": "",
"Serial number for this disk.": "",
"Serial numbers of each disk being edited.": "",
"Serial or USB port connected to the UPS. To automatically detect and manage the USB port settings, select <i>auto</i>.<br><br> When an SNMP driver is selected, enter the IP address or hostname of the SNMP UPS device.": "",
"Series": "",
"Server": "",
"Server Side Encryption": "",
"Service": "",
"Service = \"SMB\" AND Event = \"CLOSE\"": "",
"Service Account Key": "",
"Service Announcement": "",
"Service Announcement:": "",
"Service CIDR": "",
"Service Key": "",
"Service Read": "",
"Service Write": "",
"Service configuration saved": "",
"Service failed to start": "",
"Service failed to stop": "",
"Services": "",
"Session": "",
"Session ID": "",
"Session dialect": "",
"Sessions": "",
"Set": "",
"Set ACL": "",
"Set ACL for this dataset": "",
"Set Attribute": "",
"Set Frequency": "",
"Set Keep Flag": "",
"Set Quota": "",
"Set Quotas": "",
"Set Warning Level": "",
"Set enable sending messages to the address defined in the <b>Email</b> field.": "",
"Set font size": "",
"Set for the LDAP server to disable authentication and allow read and write access to any client.": "",
"Set for the UPS to power off after shutting down the system.": "",
"Set for the default configuration to listen on all interfaces using the known values of user: <i>upsmon</i> and password: <i>fixmepass</i>.": "",
"Set if the initiator does not support physical block size values over 4K (MS SQL).": "",
"Set new password:": "",
"Set only if required by the NFS client. Set to allow serving non-root mount requests.": "",
"Set or change the password of this SED. This password is used instead of the global SED password.": "",
"Set production status as active": "",
"Set specific times to snapshot the <i>Source Datasets</i> and replicate the snapshots to the <i>Destination Dataset</i>. Select a preset schedule or choose <i>Custom</i> to use the advanced scheduler.": "",
"Set the domain name to the username. Unset to prevent name collisions when Allow Trusted Domains is set and multiple domains use the same username.": "",
"Set the maximum number of connections per IP address. <i>0</i> means unlimited.": "",
"Set the number of data copies on this dataset.": "",
"Set the port the FTP service listens on.": "",
"Set the read, write, and execute permissions for the dataset.": "",
"Set the root directory for anonymous FTP connections.": "",
"Set this replication on a schedule or just once.": "",
"Set to allow FTP clients to resume interrupted transfers.": "",
"Set to allow an initiator to bypass normal access control and access any scannable target. This allows <a href=\"https://docs.microsoft.com/en-us/previous-versions/windows/it-pro/windows-server-2012-R2-and-2012/cc771254(v=ws.11)\" target=\"_blank\">xcopy</a> operations which are otherwise blocked by access control.": "",
"Set to allow group to be used for Samba permissions and authentication.": "",
"Set to allow the client to mount any subdirectory within the <b>Path</b>.": "",
"Set to allow user to authenticate to Samba shares.": "",
"Set to allow users to bypass firewall restrictions using the SSH port <a href=\"https://www.symantec.com/connect/articles/ssh-port-forwarding\" target=\"_blank\">forwarding feature</a>.": "",
"Set to also replicate all snapshots contained within the selected source dataset snapshots. Unset to only replicate the selected dataset snapshots.": "",
"Set to attempt to reduce latency over slow networks.": "",
"Set to automatically configure the IPv6. Only one interface can be configured this way.": "",
"Set to automatically create the defined <b>Remote Path</b> if it does not exist.": "",
"Set to boot a debug kernel after the next system reboot.": "",
"Set to create a new primary group with the same name as the user. Unset to select an existing group for the user.": "",
"Set to determine if the system participates in a browser election. Leave unset when the network contains an AD or LDAP server, or when Vista or Windows 7 machines are present.": "",
"Set to disable caching AD users and groups. This can help when unable to bind to a domain with a large number of users or groups.": "",
"Set to display image upload options.": "",
"Set to either start this replication task immediately after the linked periodic snapshot task completes or continue to create a separate <b>Schedule</b> for this replication.": "",
"Set to enable DHCP. Leave unset to create a static IPv4 or IPv6 configuration. Only one interface can be configured for DHCP.": "",
"Set to enable Samba to do DNS updates when joining a domain.": "",
"Set to enable connecting to the VNC web interface.": "",
"Set to enable the File eXchange Protocol. This option makes the server vulnerable to FTP bounce attacks so it is not recommended.": "",
"Set to enable the iSCSI extent.": "",
"Set to export the certificate environment variables.": "",
"Set to force NFS shares to fail if the Kerberos ticket is unavailable.": "",
"Set to generate and attach to the new issue a report containing an overview of the system hardware, build string, and configuration. This can take several minutes.": "",
"Set to ignore mapping requests for the <i>BUILTIN</i> domain.": "",
"Set to ignore the Virtual Machine status during the delete operation. Unset to prevent deleting the Virtual Machine when it is still active or has an undefined state.": "",
"Set to include all subdirectories of the specified directory. When unset, only the specified directory is included.": "",
"Set to include child datasets of the chosen dataset.": "",
"Set to include the Fully-Qualified Domain Name (FQDN) in logs to precisely identify systems with similar hostnames.": "",
"Set to inhibit some syslog diagnostics to avoid error messages. See <a href=\"https://man7.org/linux/man-pages/man5/exports.5.html\" target=\"_blank\">exports(5)</a> for examples.": "",
"Set to log <a href=\"https://man7.org/linux/man-pages/man8/mountd.8.html\" target=\"_blank\">mountd(8)</a> syslog requests.": "",
"Set to log <a href=\"https://man7.org/linux/man-pages/man8/statd.8.html\" target=\"_blank\">rpc.statd(8)</a> and <a href=\"https://linux.die.net/man/8/rpc.lockd\" target=\"_blank\">rpc.lockd(8)</a> syslog requests.": "",
"Set to log attempts to join the domain to /var/log/messages.": "",
"Set to log authentication failures in <i>/var/log/messages</i> instead of the default of <i>/var/log/samba4/log.smbd</i>.": "",
"Set to make the module <i>read-only</i>. No new ranges are allocated or new mappings created in the idmap pool.": "",
"Set to override safety checks and add the disk to the pool. <br>WARNING: any data stored on the disk will be erased!": "",
"Set to perform reverse DNS lookups on client IPs. This can cause long delays if reverse DNS is not configured.": "",
"Set to preserve modification times of files.": "",
"Set to preserve original file permissions. This is useful when the user is set to <i>root</i>.": "",
"Set to prevent the dataset from being modified.": "",
"Set to prevent the initiator from initializing this LUN.": "",
"Set to prevent the zvol from being modified.": "",
"Set to prohibit writing to the share.": "",
"Set to query the cn instead of uid attribute for the user name in LDAP.": "",
"Set to reduce the size of data to transmit. Recommended for slow connections.": "",
"Set to remove all ACLs from the current dataset. ACLs are also recursively stripped from directories and child datasets when those options are set.": "",
"Set to remove the data associated with this Virtual Machine (which will result in data loss if the data is not backed up). Unset to leave the data intact.": "",
"Set to run resilver tasks between the configured times.": "",
"Set to save the temporary file from each updated file to a holding directory until the end of the transfer when all transferred files are renamed into place.": "",
"Set to start this VM when the system boots.": "",
"Set to store the encryption key in the TrueNAS database.": "",
"Set to suppress informational messages from the remote server.": "",
"Set to take a snapshot of the dataset before a <i>PUSH</i>.": "",
"Set to take separate snapshots of the dataset and each of its child datasets. Leave unset to take a single snapshot only of the specified dataset <i>without</i> child datasets.": "",
"Set to to enable support for <a href=\"https://tools.ietf.org/html/rfc3410\" target=\"_blank\">SNMP version 3</a>. See <a href=\"http://net-snmp.sourceforge.net/docs/man/snmpd.conf.html\" target=\"_blank\">snmpd.conf(5)</a> for configuration details.": "",
"Set to use encryption when replicating data. Additional encryption options will appear.": "",
"Set to use the <i>Schedule</i> in place of the <i>Replicate Specific Snapshots</i> time frame. The Schedule values are read over the <i>Replicate Specific Snapshots</i> time frame.": "",
"Set up TrueNAS authentication method:": "",
"Set when NFSv4 ACL support is needed without requiring the client and the server to sync users and groups.": "",
"Set when a user is a member of more than 16 groups. This assumes group membership is configured correctly on the NFS server.": "",
"Set when using Xen as the iSCSI initiator.": "",
"Set whether processes can be executed from within this dataset.": "",
"Sets default Unix permissions of the user home directory. This is read-only for built-in users.": "",
"Sets default permissions for newly created directories.": "",
"Sets default permissions for newly created files.": "",
"Sets the data write synchronization. <i>Inherit</i> takes the sync settings from the parent dataset, <i>Standard</i> uses the settings that have been requested by the client software, <i>Always</i> waits for data writes to complete, and <i>Disabled</i> never waits for writes to complete.": "",
"Setting default permissions will reset the permissions of this share and any others within its path.": "",
"Setting permissions recursively affects this directory and any others below it. This can make data inaccessible.": "",
"Setting permissions recursively will affect this directory and any others below it. This might make data inaccessible.": "",
"Setting this option changes the destination dataset to be read-only. To continue using the default or existing dataset read permissions, leave this option unset.": "",
"Setting this option is <b>not</b> recommended as it breaks several security measures. Refer to <a href=\"http://www.proftpd.org/docs/contrib/mod_tls.html\" target=\"_blank\">mod_tls</a> for more details.": "",
"Setting this option is discouraged as it increases security risk.": "",
"Setting this option reduces the security of the connection, so only use it if the client does not understand reused SSL sessions.": "",
"Setting this option will result in timeouts if <b>identd</b> is not running on the client.": "",
"Setting up LDAP": "",
"Settings": "",
"Settings Requiring Re-Initialization": "",
"Settings saved": "",
"Settings saved.": "",
"Setup Method": "",
"Setup Pool To Create Custom App": "",
"Setup Pool To Install": "",
"Severity Level": "",
"Share ACL for {share}": "",
"Share Attached": "",
"Share Path updated": "",
"Share with this name already exists": "",
"Share your thoughts on our product's features, usability, or any suggestions for improvement.": "",
"Shares": "",
"Sharing": "",
"Sharing Admin": "",
"Sharing NFS Read": "",
"Sharing NFS Write": "",
"Sharing Platform": "",
"Sharing Read": "",
"Sharing SMB Read": "",
"Sharing SMB Write": "",
"Sharing Write": "",
"Sharing iSCSI Auth Read": "",
"Sharing iSCSI Auth Write": "",
"Sharing iSCSI Extent Read": "",
"Sharing iSCSI Extent Write": "",
"Sharing iSCSI Global Read": "",
"Sharing iSCSI Global Write": "",
"Sharing iSCSI Host Read": "",
"Sharing iSCSI Host Write": "",
"Sharing iSCSI Initiator Read": "",
"Sharing iSCSI Initiator Write": "",
"Sharing iSCSI Portal Read": "",
"Sharing iSCSI Portal Write": "",
"Sharing iSCSI Read": "",
"Sharing iSCSI Target Extent Read": "",
"Sharing iSCSI Target Extent Write": "",
"Sharing iSCSI Target Read": "",
"Sharing iSCSI Target Write": "",
"Sharing iSCSI Write": "",
"Shell": "",
"Shell Commands": "",
"Short": "",
"Short Description": "",
"Should only be used for highly accurate <b>NTP</b> servers such as those with time monitoring hardware.": "",
"Show": "",
"Show All Groups": "",
"Show All Users": "",
"Show Built-in Groups": "",
"Show Built-in Users": "",
"Show Console Messages": "",
"Show Events": "",
"Show Extra Columns": "",
"Show Text Console without Password Prompt": "",
"Show all available groups, including those that do not have quotas set.": "",
"Show all available users, including those that do not have quotas set.": "",
"Show extra columns": "",
"Show only those users who have quotas. This is the default view.": "",
"Showing extra columns in the table is useful for data filtering, but can cause performance issues.": "",
"Shows only the groups that have quotas. This is the default view.": "",
"Shrinking a ZVOL is not allowed in the User Interface. This can lead to data loss.": "",
"Shut Down": "",
"Shut down": "",
"Shut down the system?": "",
"Shutdown": "",
"Shutdown Command": "",
"Shutdown Mode": "",
"Shutdown Timeout": "",
"Shutdown Timer": "",
"Sign": "",
"Sign CSR": "",
"Sign In": "",
"Signed By": "",
"Signed Certificates": "",
"Signin": "",
"Signing": "",
"Signing Certificate Authority": "",
"Signing Request": "",
"Signup": "",
"Signup for account": "",
"Silver / Gold Coverage Customers can enable iXsystems Proactive Support. This automatically emails iXsystems when certain conditions occur on this TrueNAS system. The iX Support Team will promptly communicate with the Contacts saved below to quickly resolve any issue that may have occurred on the system.": "",
"Similar Apps": "",
"Site Name": "",
"Size": "",
"Size for this zvol": "",
"Size in GiB of refreservation to set on ZFS dataset where the audit databases are stored. The refreservation specifies the minimum amount of space guaranteed to the dataset, and counts against the space available for other datasets in the zpool where the audit dataset is located.": "",
"Size in GiB of the maximum amount of space that may be consumed by the dataset where the audit dabases are stored.": "",
"Skip": "",
"Skip automatic detection of the Endpoint URL region. Set this when configuring a custom Endpoint URL.": "",
"Sleep": "",
"Slot": "",
"Smb Status": "",
"Snapdev": "",
"Snapshot": "",
"Snapshot Delete": "",
"Snapshot Directory": "",
"Snapshot Lifetime": "",
"Snapshot Name Regular Expression": "",
"Snapshot Read": "",
"Snapshot Retention Policy": "",
"Snapshot Task Read": "",
"Snapshot Task Write": "",
"Snapshot Tasks": "",
"Snapshot Write": "",
"Snapshot added successfully.": "",
"Snapshot deleted.": "",
"Snapshot name format string. The default is <code>auto-%Y-%m-%d_%H-%M</code>. Must include the strings <i>%Y</i>, <i>%m</i>, <i>%d</i>, <i>%H</i>, and <i>%M</i>, which are replaced with the four-digit year, month, day of month, hour, and minute as defined in <a href=\"https://man7.org/linux/man-pages/man3/strftime.3.html\" target=\"_blank\">strftime(3)</a>.<br><br> For example, snapshots of <i>pool1</i> with a Naming Schema of <i>customsnap-%Y%m%d.%H%M</i> have names like <i>pool1@customsnap-20190315.0527</i>.": "",
"Snapshot schedule for this replication task. Choose from previously configured <b>Periodic Snapshot Tasks</b>. This replication task must have the same <b>Recursive</b> and <b>Exclude Child Datasets</b> values as the chosen periodic snapshot task. Selecting a periodic snapshot schedule removes the <b>Schedule</b> field.": "",
"Snapshots": "",
"Snapshots could not be loaded": "",
"Snapshots must not have dependent clones": "",
"Snapshots will be created automatically.": "",
"Some of the disks are attached to the exported pools\n mentioned in this list. Checking a pool name means you want to\n allow reallocation of the disks attached to that pool.": "",
"Some of the selected disks have exported pools on them. Using those disks will make existing pools on them unable to be imported. You will lose any and all data in selected disks.": "",
"Something went wrong": "",
"Sort": "",
"Source": "",
"Source Dataset": "",
"Source Location": "",
"Space": "",
"Space Available to Dataset": "",
"Space Available to Zvol": "",
"Spaces are allowed.": "",
"Spare": "",
"Spare VDEVs": "",
"Spares": "",
"Sparse": "",
"Special Allocation class, used to create Fusion pools. Optional VDEV type which is used to speed up metadata and small block IO.": "",
"Specifies the auxiliary directory service ID provider.": "",
"Specify a size and value such as <i>10 GiB</i>.": "",
"Specify custom": "",
"Specify number of threads manually": "",
"Specify the logical cores that VM is allowed to use. Better cache locality can be achieved by setting CPU set base on CPU topology. E.g. to assign cores: 0,1,2,5,9,10,11 you can write: 1-2,5,9-11": "",
"Specify the message displayed to local login users after authentication. Not displayed to anonymous login users.": "",
"Specify the number of cores per virtual CPU socket.": "",
"Specify the number of threads per core.": "",
"Specify the size of the new zvol.": "",
"Specify this certificate's valid Key Usages. Web certificates typically need at least Digital Signature and possibly Key Encipherment or Key Agreement, while other applications may need other usages.": "",
"Specify whether the issued certificate should include Authority Key Identifier information, and whether the extension is critical. Critical extensions must be recognized by the client or be rejected.": "",
"Specify whether to use the certificate for a Certificate Authority and whether this extension is critical. Clients must recognize critical extensions to prevent rejection. Web certificates typically require you to disable CA and enable Critical Extension.": "",
"Speeds up the initial synchronization (seconds instead of minutes).": "",
"Staging": "",
"Standard": "",
"Standby": "",
"Standby {controller}.": "",
"Standby: TrueNAS Controller {id}": "",
"Start": "",
"Start All Selected": "",
"Start Automatically": "",
"Start Over": "",
"Start Scrub": "",
"Start a dry run test of this cloud sync task? The system will connect to the cloud service provider and simulate transferring a file. No data will be sent or received.": "",
"Start on Boot": "",
"Start scrub on pool <i>{poolName}</i>?": "",
"Start session time": "",
"Start the scrub now?": "",
"Start time for the replication task.": "",
"Start {service} Service": "",
"Started": "",
"Starting": "",
"Starting task": "",
"State": "",
"Stateful Sets": "",
"Static IP addresses which SMB listens on for connections. Leaving all unselected defaults to listening on all active interfaces.": "",
"Static IPv4 address of the IPMI web interface.": "",
"Static Routes": "",
"Static route added": "",
"Static route deleted": "",
"Static route updated": "",
"Stats": "",
"Stats Per Thread": "",
"Stats/Settings": "",
"Status": "",
"Status of TrueCommand": "",
"Status: ": "",
"Step Back": "",
"Step Forward": "",
"Stop": "",
"Stop All Selected": "",
"Stop Flashing": "",
"Stop Rollback if Snapshots Exist:": "",
"Stop Scrub": "",
"Stop TrueCommand Cloud Connection": "",
"Stop the scrub on {poolName}?": "",
"Stop the {serviceName} service and close these connections?": "",
"Stop this Cloud Sync?": "",
"Stop {serviceName}?": "",
"Stop {vmName}?": "",
"Stopped": "",
"Stopping": "",
"Stopping Apps Service": "",
"Stopping {rowName}": "",
"Stops the rollback when the safety check finds any related clone snapshots that are newer than the rollback snapshot.": "",
"Stops the rollback when the safety check finds any related intermediate, child dataset, or clone snapshots that are newer than the rollback snapshot.": "",
"Storage": "",
"Storage Class": "",
"Storage Dashboard": "",
"Storage Settings": "",
"Storage URL": "",
"Storage Widgets": "",
"Storage location for the original snapshots that will be replicated.": "",
"Storage location for the replicated snapshots.": "",
"Store Encryption key in Sending TrueNAS database": "",
"Store system logs on the system dataset. Unset to store system logs in <i>/var/</i> on the operating system device.": "",
"Storj": "",
"Storj is a decentralized, open-source cloud storage platform. It uses blockchain technology and cryptography to secure files. Instead of storing files in a centralized server, Storj splits up files, encrypts them, and distributes them across a network of computers around the world.": "",
"Stream Compression": "",
"Strip ACL": "",
"Strip ACLs": "",
"Stripe": "",
"Stripping ACLs": "",
"Stripping ACLs...": "",
"Subdir Filter": "",
"Subject": "",
"Subject Alternative Name": "",
"Submit": "",
"Subnet mask of the IPv4 address.": "",
"Success": "",
"Success! The API key has been created or reset.": "",
"Successfully expanded pool {name}.": "",
"Successfully exported/disconnected {pool}.": "",
"Successfully replaced disk {disk}.": "",
"Successfully saved IPMI settings.": "",
"Successfully saved proactive support settings.": "",
"Successfully saved {n, plural, one {Disk} other {Disks}} settings.": "",
"Sudo Enabled": "",
"Suggest an improvement": "",
"Suggestion": "",
"Summary": "",
"Sun": "",
"Sunday": "",
"Support": "",
"Support >16 groups": "",
"Support Read": "",
"Support Write": "",
"Swap Size": "",
"Switch To Advanced": "",
"Switch To Basic": "",
"Switch To Wizard": "",
"Switch Train": "",
"Switch to Advanced Options": "",
"Switch update trains?": "",
"Switched to new dataset «{name}».": "",
"Switched to new zvol «{name}».": "",
"Switching to Advanced Options will lose data entered on second step. Do you want to continue?": "",
"Sync": "",
"Sync From Peer": "",
"Sync Keys": "",
"Sync To Peer": "",
"Sync from Peer": "",
"Sync from peer succeeded.": "",
"Sync to Peer": "",
"Sync to peer succeeded.": "",
"Synced": "",
"Synchronize": "",
"Sysctl": "",
"Sysctl \"{name}\" deleted": "",
"Syslog": "",
"Syslog Level": "",
"Syslog Server": "",
"Syslog TLS Certificate": "",
"Syslog TLS Certificate Authority": "",
"Syslog Transport": "",
"System": "",
"System Audit Read": "",
"System Audit Write": "",
"System Clock": "",
"System Dataset": "",
"System Dataset Pool": "",
"System Information": "",
"System Information (Standby)": "",
"System Security": "",
"System Security Settings Updated.": "",
"System Serial": "",
"System Settings": "",
"System Time Zone:": "",
"System Widgets": "",
"System dataset updated.": "",
"System domain name, like <i>example.com</i>": "",
"System hostname.": "",
"System is failing over...": "",
"System is restarting...": "",
"System is shutting down...": "",
"TCP Port": "",
"TCP port used to access the iSCSI target. Default is <i>3260</i>.": "",
"TLS (STARTTLS)": "",
"TLS Allow Client Renegotiations": "",
"TLS Allow Dot Login": "",
"TLS Allow Per User": "",
"TLS Common Name Required": "",
"TLS DNS Name Required": "",
"TLS Enable Diagnostics": "",
"TLS Export Certificate Data": "",
"TLS Export Standard Vars": "",
"TLS IP Address Required": "",
"TLS No Empty Fragments": "",
"TLS No Session Reuse Required": "",
"TLS Policy": "",
"Table Actions of Expandable Table": "",
"Tag": "",
"Tags": "",
"Tail Lines": "",
"Take Snapshot": "",
"Take screenshot of the current page": "",
"Target": "",
"Target Alias": "",
"Target Dataset": "",
"Target Global Configuration": "",
"Target Mode": "",
"Target Name": "",
"Target dataset encryption will be inherited from its parent dataset.": "",
"Target with this name already exists": "",
"Targets": "",
"Task Aborted": "",
"Task Name": "",
"Task Stopped": "",
"Task created": "",
"Task is on hold": "",
"Task is running": "",
"Task started": "",
"Task updated": "",
"Tasks": "",
"Tasks could not be loaded": "",
"Team Drive ID": "",
"Temperature": "",
"Temperature Alerts": "",
"Temperature data missing.": "",
"Tenant Domain": "",
"Tenant ID": "",
"Tenant Name": "",
"Terminate Other Sessions": "",
"Terminate session": "",
"Terms of Service": "",
"Test Changes": "",
"Test Cloud Sync": "",
"Test alert sent": "",
"Test email sent.": "",
"Test network interface changes for ": "",
"Test network interface changes? Network connectivity can be interrupted.": "",
"Testing": "",
"Tests are only performed when <i>Never</i> is selected.": "",
"Tests the server connection and verifies the chosen <b>Certificate</b> chain. To test, configure the <i>Server</i> and <i>Port</i> values, select a <i>Certificate</i> and <i>Certificate Authority</i>, enable this setting, and click <b>SAVE</b>.": "",
"Thank you for sharing your feedback with us! Your insights are valuable in helping us improve our product.": "",
"The <a href=\"https://www.ixsystems.com/community/\" target=\"_blank\" class=\"external-link\">TrueNAS Community Forums</a> are the best place to ask questions and interact with fellow TrueNAS users.": "",
"The <a href=\"https://www.truenas.com/docs/\" target=\"_blank\">TrueNAS Documentation Site</a> is a collaborative website with helpful guides and information about your new storage system.": "",
"The <i><b>{name}</b></i> dataset and all snapshots stored with it <b>will be permanently deleted</b>.": "",
"The <i><b>{name}</b></i> zvol and all snapshots stored with it <b>will be permanently deleted</b>.": "",
"The <i>Alias</i> field can either be left empty or have an alias defined for each path in the share.": "",
"The <i>Use Apple-style character encoding</i> value has changed. This parameter affects how file names are read from and written to storage. Changes to this parameter after data is written can prevent accessing or deleting files containing mangled characters.": "",
"The Group ID (GID) is a unique number used to identify a Unix group. Enter a number above 1000 for a group with user accounts. Groups used by a service must have an ID that matches the default port number used by the service.": "",
"The Idmap cache should be cleared after finalizing idmap changes. Click \"Continue\" to clear the cache.": "",
"The SMB service has been restarted.": "",
"The SMB share ACL defines access rights for users of this SMB share up to, but not beyond, the access granted by filesystem ACLs.": "",
"The SSL certificate to be used for TLS FTP connections. To create a certificate, use <b>System --> Certificates</b>.": "",
"The TrueNAS controllers do not have the same quantity of disks.": "",
"The URI used to provision an OTP. The URI (which contains the secret) is encoded in a QR Code. To set up an OTP app like Google Authenticator, use the app to scan the QR code or enter the secret manually into the app. The URI is produced by the system when Two-Factor Authentication is first activated.": "",
"The VM could not start because the current configuration could potentially require more RAM than is available on the system. Memory overcommitment allows multiple VMs to be launched when there is not enough free memory for configured RAM of all VMs. Use with caution. Would you like to overcommit memory?": "",
"The base name is automatically prepended if the target name does not start with <i>iqn</i>. Lowercase alphanumeric characters plus dot (.), dash (-), and colon (:) are allowed. See the <i>Constructing iSCSI names using the iqn.format</i> section of <a href=\"https://tools.ietf.org/html/rfc3721.html\" target=\"_blank\">RFC3721</a>.": "",
"The cache has been cleared.": "",
"The cache is being rebuilt.": "",
"The certificate's public key is used to encipher user data only during key agreement operations. Requires that <b>Key Agreement</b> is also set.": "",
"The chosen preset ACL will <strong>REPLACE</strong> the ACL currently displayed in the form and delete any unsaved changes.": "",
"The contents of all added disks will be erased.": "",
"The credentials are valid.": "",
"The cryptographic algorithm to use. The default <i>SHA256</i> only needs to be changed if the organization requires a different algorithm.": "",
"The current pool layout is not recommended. Override the following errors?": "",
"The default \"Checksum\" value for datasets with deduplication used to be SHA256.\n Our testing has shown that SHA512 performs better for such datasets.\n We've changed the checksum value from SHA256 to SHA512. You can change it back in \"Advanced Options\".": "",
"The directory base suffix to use for SID/uid/gid mapping entries. Example: dc=test,dc=org. When undefined, idmap_ldap defaults to using the ldap idmap suffix option from <a href=\"https://www.samba.org/samba/docs/current/man-html/smb.conf.5.html\" target=\"_blank\">smb.conf</a>.": "",
"The domain for local users is the NetBIOS name of the TrueNAS server.": "",
"The domain to access the Active Directory server when using the LDAP server inside the Active Directory server.": "",
"The file used to manually update the system. Browse to the update file stored on the system logged into the web interface to upload and apply. Update file names end with <i>-manual-update-unsigned.tar</i>": "",
"The filesystem {filesystemName} is {filesystemDescription}, but datastore {datastoreName} is {datastoreDescription}. Is this correct?": "",
"The following changes to this SMB Share require the SMB Service to be restarted before they can take effect.": "",
"The following datasets cannot be unlocked.": "",
"The following disks have exported pools on them.\n Using those disks will make existing pools on them unable to be imported.\n You will lose any and all data in selected disks.": "",
"The following issues were already reported.": "",
"The following { n, plural, one {application} other {# applications} } will be upgraded. Are you sure you want to proceed?": "",
"The following { n, plural, one {boot environment} other {# boot environments} } will be deleted. Are you sure you want to proceed?": "",
"The following { n, plural, one {docker image} other {# docker images} } will be deleted. Are you sure you want to proceed?": "",
"The following { n, plural, one {docker image} other {# docker images} } will be updated. Are you sure you want to proceed?": "",
"The following { n, plural, one {snapshot} other {# snapshots} } will be deleted. Are you sure you want to proceed?": "",
"The friendly name to show in front of the sending email address. Example: <i>Storage System 01</i><it@example.com>": "",
"The group which controls the dataset. This group has the same permissions as granted to the <i>group@</i> <i>Who</i>. Groups created manually or imported from a directory service appear in the drop-down menu.": "",
"The hostname or IP address of the LDAP server. Separate entries by pressing <code>Enter</code>.": "",
"The imported pool contains encrypted datasets, unlock them now?": "",
"The length of {field} should be at least {minLength}": "",
"The length of {field} should be no more than {maxLength}": "",
"The lifetime of the CA specified in days.": "",
"The list is empty.": "",
"The maximum number of simultaneous clients.": "",
"The maximum polling interval, in seconds, as a power of 2. For example, <i>10</i> means 2^10, or 1,024 seconds. The default is 10, maximum value is 17.": "",
"The message to show when a user logs in with SSH.": "",
"The minimum polling interval, in seconds, as a power of 2. For example, <i>6</i> means 2^6, or 64 seconds. The default is 6, minimum value is 4.": "",
"The name \"{value}\" is already in use.": "",
"The number of bits in the key used by the cryptographic algorithm. For security reasons, a minimum key length of <i>2048</i> is recommended.": "",
"The number of children must at the minimum accomodate the total number of disks required for the previous configuration options including parity drives.": "",
"The operation timed out. The requested resource might be offline. Check the network connection.": "",
"The parent of this dataset has an Access Control List (ACL). Do you want to set an ACL for this dataset using the ACL Manager? ": "",
"The pasted string ends with a space": "",
"The pasted string starts with a space": "",
"The path <i>{path}</i> is in a locked dataset.": "",
"The pool <i>{pool}</i>is in the database but not connected to the machine. If it was exported by mistake, reconnect the hardware and use <b>Import Pool</b>.<br /><br />": "",
"The preconfigured system <i>Certificate</i> to use for authenticating the TLS protocol connection to the remote system log server.": "",
"The product of vCPUs, cores and threads must not exceed {maxVcpus} on this system.": "",
"The reporting database is broken": "",
"The rollback will destroy any related intermediate, child dataset, and cloned snapshots that are newer than the rollback snapshot.": "",
"The search base where group objects can be found in the LDAP server.": "",
"The search base where user objects can be found in the LDAP server.": "",
"The secret used to generate OTPs. The secret is produced by the system when Two-Factor Authentication is first activated.": "",
"The sharing configuration will be removed. Data in the share dataset will not be affected.": "",
"The specified permissions of that group are used by all clients.": "",
"The specified permissions of that user are used by all clients.": "",
"The standby controller has finished upgrading. To complete the update process, failover to the standby controller.": "",
"The standby controller will be automatically restarted to finalize the update. Apply updates and restart the standby controller?": "",
"The system could not retrieve any SMB Shares from the database. Please click the button below to add an SMB Share.": "",
"The system could not retrieve any {item} from the database.": "",
"The system dataset will be updated and the SMB service restarted. This will cause a temporary disruption of any active SMB connections.": "",
"The system restricts creating a zvol that brings the pool to over 80% capacity. Set to force creation of the zvol (<b>NOT Recommended</b>).": "",
"The system returned the following error - ": "",
"The system uses a self-signed certificate to enable encrypted web interface connections. To change the default certificate, select a different certificate that was created or imported in the <b>Certificates</b> menu.": "",
"The system will reboot and be briefly unavailable while applying updates. Apply updates and reboot?": "",
"The ticket was created successfully (see link below), but the debug file failed to attach. Please download the debug manually (System → Advanced → Save Debug), upload it to a third-party storage service and provide a link in the JIRA issue comment.": "",
"The time in seconds the system waits for the VM to cleanly shut down. During system shutdown, the system initiates poweroff for the VM after the shutdown timeout has expired.": "",
"The time values when the task will run. Accepts standard <a href=\"https://man7.org/linux/man-pages/man5/crontab.5.html\" target=\"_blank\">crontab(5)</a> values. </br></br>Symbols:</br> A comma (,) separates individual values.</br> An asterisk (*) means \"match all values\".</br> Hyphenated numbers (1-5) sets a range of time.</br> A slash (/) designates a step in the value: */2 means every other minute.</br></br> Example: 30-35 in Minutes, 1,14 in Hours, and */2 in Days means the task will run on 1:30 - 1:35 AM and 2:30 - 2:35 PM every other day.": "",
"The update file is temporarily stored here before being applied.": "",
"The user account <i>Email</i> address to use for the envelope <i>From</i> email address. The user account <i>Email</i> in <b>Accounts > Users > Edit</b> must be configured first.": "",
"The user-defined string that can unlock this dataset.": "",
"The value is out of range. Enter a value between {min} and {max}.": "",
"The web service must restart for the protocol changes to take effect. The UI will be temporarily unavailable. Restart the service?": "",
"The zvol default block size is automatically chosen based on the number of the disks in the pool for a general use case.": "",
"The {name} service is {status}": "",
"The {service} service failed to start.": "",
"The {service} service failed to stop.": "",
"The {service} service is running and will auto-start after a system reboot.": "",
"The {service} service is running.": "",
"Theme": "",
"There are no alerts.": "",
"There are no images requiring upgrade": "",
"There are no records to show.": "",
"There are no tasks.": "",
"There are pending network interface changes. Review them now?": "",
"There are unapplied network interface changes that must be tested before being permanently saved. Test changes now?": "",
"There are {sessions} active iSCSI connections.": "",
"There is an upgrade waiting to finish.": "",
"These <a href=\"https://support.apple.com/en-us/HT210803\" target=\"_blank\">protocol extensions</a> can be used by macOS to improve the performance and behavioral characteristics of SMB shares. This is required for Time Machine support.": "",
"These IP Addresses were removed: {uniqueIPs}. The listed services will be changed to listen on 0.0.0.0: {affectedServices}": "",
"These arguments are passed to <a href=\"https://rclone.org/docs/\" target=\"_blank\">rclone</a>.": "",
"These datasets could not be unlocked.": "",
"These datasets were not unlocked because the parent datasets could not be unlocked.": "",
"These datasets were successfully unlocked.": "",
"These datasets will be unlocked with the provided credentials.": "",
"These disks do not support S.M.A.R.T. tests:": "",
"These running processes are using {datasetName}:": "",
"These running processes are using {name}:": "",
"These services depend on dataset {name} and will be destroyed if the dataset is deleted:": "",
"These services depend on pool {name} and will be disrupted if the pool is detached:": "",
"These services must be restarted to export the pool:": "",
"These services must be stopped to export the pool:": "",
"Thick": "",
"Third DNS server.": "",
"Third-party Cloud service providers. Choose a provider to configure connection credentials.": "",
"This Certificate Authority is being used to sign one or more certificates. It can be deleted only after deleting these certificates.": "",
"This Dataset": "",
"This Dataset and Child Datasets": "",
"This action removes all ACLs from the current dataset and any directories or files contained within this dataset. Stripping the ACL resets dataset permissions. This can make data inaccessible until new permissions are created.": "",
"This action will set all dataset quotas for the removed or invalid groups to 0, virtually removing any dataset quota entries for such groups. Are you sure you want to proceed?": "",
"This action will set all dataset quotas for the removed or invalid users to 0, virutally removing any dataset quota entires for such users. Are you sure you want to proceed?": "",
"This allows your TrueNAS system to be monitored and administrated by TrueCommand. Click <b>SIGNUP</b> to create a new TrueCommand Cloud instance or <b>CONNECT</b> to join an existing instance.": "",
"This certificate's public key is used for key management.": "",
"This certificate's public key is used to decipher user data only during key agreement operations. Requires that <b>Key Agreement</b> is also set.": "",
"This certificate's public key is used to encipher user data.": "",
"This certificate's public key is used to manage key agreement.": "",
"This certificate's public key is used to verify signatures on a certificate revocation list (CRL).": "",
"This certificate's public key is used to verify signatures on other public key certificates. Activating this also requires enabling the <b>CA</b> basic constraint.": "",
"This certificate's public key is used with digital signature methods that are separate from certificate or CRL signing.": "",
"This certificate's public key verifies digital signatures used for a non-repudiation service.": "",
"This change can interrupt connectivity and must be tested before making permanent. ": "",
"This controls how the SMB share reads and writes data. Leave unset for the share to behave like a normal SMB share and set for the share to behave like the deprecated Apple Filing Protocol (AFP). This should only be set when this share originated as an AFP sharing configuration. This is not required for pure SMB shares or MacOS SMB clients.": "",
"This dataset has children with shares": "",
"This dataset is used by the system": "",
"This dataset is used by: {apps}": "",
"This dataset is used by: {vms}": "",
"This dataset is used to store Kubernetes config and other container related data": "",
"This disk is part of the exported pool {pool}. Adding this disk to a new or other existing pools will make {pool} unable to import. You will lose any and all data in {pool}. Please make sure you have backed up any sensitive data in {pool} before reusing/repurposing this disk.": "",
"This disk is part of the exported pool {pool}. Reusing this disk will make {pool} unable to import. You will lose any and all data in {pool}. Please make sure any sensitive data in {pool} is backed up before reusing/repurposing this disk.": "",
"This disk is part of the exported pool {pool}. Wiping this disk will make {pool} unable\n to import. You will lose any and all data in {pool}. Please make sure that any sensitive data in {pool} is backed up before wiping this disk.": "",
"This disk is part of the exported pool {pool}. Wiping this disk will make {pool} unable to import. You will lose any and all data in {pool}. Please make sure that any sensitive data in {pool} is backed up before reusing/repurposing this disk.": "",
"This feature is memory-intensive and <b>permanently affects how the data is stored</b>. It is recommended to be very familiar with the benefits and drawbacks of deduplication before activating this feature.": "",
"This field accepts human-readable input (Ex. 50 GiB, 500M, 2 TB).": "",
"This field accepts human-readable input (Ex. 50 GiB, 500M, 2 TB). If units are not specified, the value defaults to": "",
"This field remains empty until a token is obtained.\n Choose the category that best describes the bug or feature being reported.": "",
"This information is provided by the catalog maintainer.": "",
"This is a ONE-SHOT {alertLevel} alert, it won't be dismissed automatically": "",
"This is a one way action and cannot be reversed. Are you sure you want to revoke this Certificate?": "",
"This is a production system": "",
"This is not a production release, and should only be used for testing.": "",
"This is the only time the key is shown.": "",
"This job is scheduled to run again {nextRun}.": "",
"This job will not run again until it is enabled.": "",
"This node is currently processing a failover event.": "",
"This option controls how metadata and alternate data streams read write to disks. Only enable this when the share configuration was migrated from the deprecated Apple Filing Protocol (AFP). Do not attempt to force a previous AFP share to behave like a pure SMB share or file corruption can occur.": "",
"This pool contains the system dataset that stores critical data like debugging core files, encryption keys for pools, and Samba 4 metadata such as the user/group cache and share level permissions. Exporting this pool will transfer the system dataset to another available pool. If the only available pool is encrypted, that pool will no longer be able to be locked. When no other pools exist, the system dataset transfers back to the TrueNAS operating system device.": "",
"This pool has an encrypted root dataset which is locked. Do you want to unlock it?": "",
"This process continues in the background after closing this dialog.": "",
"This session is current and cannot be terminated": "",
"This system cannot communicate externally.": "",
"This system will restart when the update completes.": "",
"This value represents the threshold block size for including small file blocks into the special allocation class. Blocks smaller than or equal to this value will be assigned to the special allocation class while greater blocks will be assigned to the regular class. Valid values are zero or a power of two from 512B up to 1M. The default size is 0 which means no small file blocks will be allocated in the special class. Before setting this property, a special class vdev must be added to the pool. See <a href=\"https://zfsonlinux.org/manpages/0.7.13/man8/zpool.8.html\" target=\"_blank\">zpool(8)</a> for more details on the special allocation": "",
"Thread #": "",
"Thread responsible for syncing db transactions not running on other node.": "",
"Thread responsible for syncing db transactions not running on this node.": "",
"Thread:": "",
"Threads": "",
"Threshold Days": "",
"Threshold temperature in Celsius. If the drive temperature is higher than this value, a LOG_CRIT level log entry is created and an email is sent. <i>0</i> disables this check.": "",
"Thu": "",
"Thursday": "",
"Ticket was created, but we were unable to upload one or more attachments.": "",
"Time": "",
"Time (in seconds) before the system stops attempting to establish a connection with the remote system.": "",
"Time Format": "",
"Time Machine": "",
"Time Machine Quota": "",
"Time in seconds after which current user session will be disconnected. Interacting with UI extends the session.": "",
"Timeout": "",
"Times": "",
"Timestamp": "",
"Timezone": "",
"Title": "",
"To activate this periodic snapshot schedule, set this option. To disable this task without deleting it, unset this option.": "",
"To configure Isolated GPU Device(s), click the \"Configure\" button.": "",
"To enable disable Active Directory first.": "",
"To enable disable LDAP first.": "",
"Today": "",
"Toggle Collapse": "",
"Toggle {row}": "",
"Token": "",
"Token Lifetime": "",
"Token created with <a href=\"https://developers.google.com/drive/api/v3/about-auth\" target=\"_blank\">Google Drive</a>.": "",
"Token created with <a href=\"https://developers.google.com/drive/api/v3/about-auth\" target=\"_blank\">Google Drive</a>. Access Tokens expire periodically and must be refreshed.": "",
"Token expired": "",
"Tolerance Window": "",
"Top level of the LDAP directory tree to be used when searching for resources. Example: <i>dc=test,dc=org</i>.": "",
"Topic <a href=\"https://docs.aws.amazon.com/sns/latest/dg/CreateTopic.html\" target=\"_blank\">Amazon Resource Name (ARN)</a> for publishing. Example: <b>arn:aws:sns:us-west-2:111122223333:MyTopic</b>.": "",
"Topology": "",
"Topology Summary": "",
"Total": "",
"Total Allocation": "",
"Total Capacity": "",
"Total Disks": "",
"Total Down": "",
"Total Raw Capacity": "",
"Total Snapshots": "",
"Total ZFS Errors": "",
"Total failed": "",
"Train": "",
"Train: {train}": "",
"Transfer": "",
"Transfer Mode": "",
"Transfers": "",
"Transmit Hash Policy": "",
"Transparently reuse a single copy of duplicated data to save space. Deduplication can improve storage capacity, but is RAM intensive. Compressing data is generally recommended before using deduplication. Deduplicating data is a one-way process. <b>Deduplicated data cannot be undeduplicated!</b>.": "",
"Transport": "",
"Transport Options": "",
"Traverse": "",
"Treat Disk Size as Minimum": "",
"TrueCommand": "",
"TrueCommand Cloud Service": "",
"TrueCommand Cloud Service deregistered": "",
"TrueCommand Cloud Service has been deregistered.": "",
"TrueCommand IP": "",
"TrueNAS Controller": "",
"TrueNAS Help": "",
"TrueNAS URL": "",
"TrueNAS recommends that the sync setting always be left to the default of \"Standard\" or increased to \"Always\". The \"Disabled\" setting should not be used in production and only where data roll back by few seconds in case of crash or power loss is not a concern.": "",
"TrueNAS server must be joined to Active Directory or have at least one local SMB user before creating an SMB share": "",
"TrueNAS software versions do not match between storage controllers.": "",
"TrueNAS was unable to reach update servers.": "",
"TrueNAS {product} is Free and <a href=\"https://github.com/truenas/\" target=\"_blank\"> Open Source</a> software, which is provided as-is with no warranty.": "",
"Trust Guest Filters": "",
"Tue": "",
"Tuesday": "",
"Tunables": "",
"Turn Off Service": "",
"Turn On Service": "",
"Two Factor Auth": "",
"Two Factor Authentication for SSH": "",
"Two-Factor Authentication": "",
"Two-Factor Authentication Code": "",
"Two-Factor Authentication Setup Warning!": "",
"Two-Factor Authentication has been enabled on this system. You are required to setup your 2FA authentication on the next page. You will not be able to proceed without setting up 2FA for your account. Make sure to scan the QR code with your authenticator app in the end before logging out of the system or navigating away. Otherwise, you will be locked out of the system and will be unable to login after logging out.": "",
"Two-Factor authentication has been configured. No further actions are required.": "",
"Two-Factor authentication is not enabled on this this system. You can configure your personal settings, but they will have no effect until two-factor authentication is enabled globally by system administrator.": "",
"Two-Factor authentication is required on this system, but it's not yet configured for your user. Please configure it now.": "",
"Type": "",
"Type of Microsoft acount. Logging in to a Microsoft account automatically chooses the correct account type.": "",
"UDP port number on the system receiving SNMP trap notifications. The default is <i>162</i>.": "",
"UID": "",
"UNASSIGNED": "",
"UNIX (NFS) Shares": "",
"UNIX Charset": "",
"UPDATE IN PROGRESS": "",
"UPS": "",
"UPS Mode": "",
"URI of the ACME Server Directory. Choose a pre configured URI": "",
"URI of the ACME Server Directory. Enter a custom URI.": "",
"URL": "",
"URL of the HTTP host to connect to.": "",
"USB Passthrough Device": "",
"UTC": "",
"Unable to retrieve Available Applications": "",
"Unable to terminate processes which are using this pool: ": "",
"Unassigned": "",
"Unassigned Disks": "",
"Unauthorized Access": "",
"Unavailable": "",
"Unencrypted": "",
"Unhealthy": "",
"Unique LUN ID. The default is generated from the MAC address of the system.": "",
"Unique Virtual Host ID on the broadcast segment of the network. Configuring multiple Virtual IP addresses requires a separate VHID for each address.": "",
"Unique drive identifier. Log in to a Microsoft account and choose a drive from the <i>Drives List</i> drop-down to add a valid ID.": "",
"Unique snapshot name. Cannot be used with a <i>Naming Schema</i>.": "",
"Unit": "",
"Unix NSS Info": "",
"Unix Permissions": "",
"Unix Permissions Editor": "",
"Unix Primary Group": "",
"Unix Socket": "",
"Unkeep": "",
"Unknown": "",
"Unknown CPU": "",
"Unknown Disk": "",
"Unknown PID": "",
"Unlink": "",
"Unlock": "",
"Unlock Child Encrypted Roots": "",
"Unlock Datasets": "",
"Unlock Pool": "",
"Unlock with Key file": "",
"Unlocked": "",
"Unlocking Datasets": "",
"Unselect All": "",
"Unset": "",
"Unset <i>Generate Encryption Key</i> to instead import a custom Hex key.": "",
"Unset Pool": "",
"Unset to add a login prompt to the system before the console menu is shown.": "",
"Unset to disable the scheduled scrub without deleting it.": "",
"Unset to disable this service without deleting it.": "",
"Unshare": "",
"Unshare {name}": "",
"Unsupported Hardware": "",
"Until": "",
"Up to date": "",
"Update": "",
"Update 'Time Machine'": "",
"Update All": "",
"Update Available": "",
"Update File": "",
"Update File Temporary Storage Location": "",
"Update Image": "",
"Update Interval": "",
"Update License": "",
"Update Members": "",
"Update Pool": "",
"Update Production Status": "",
"Update TrueCommand Settings": "",
"Update available": "",
"Update in Progress": "",
"Update is complete, please reboot the system.": "",
"Update successful. Please reboot for the update to take effect. Reboot now?": "",
"Updated 'Use as Home Share'": "",
"Updated Date": "",
"Updates": "",
"Updates Available": "",
"Updates available": "",
"Updates successfully downloaded": "",
"Updating": "",
"Updating ACL": "",
"Updating key type": "",
"Upgrade": "",
"Upgrade All Selected": "",
"Upgrade Pool": "",
"Upgrade Waiting to Finish": "",
"Upgrades both controllers. Files are downloaded to the Active Controller and then transferred to the Standby Controller. The upgrade process starts concurrently on both TrueNAS Controllers. Continue with download?": "",
"Upgrading Apps. Please check on the progress in Task Manager.": "",
"Upgrading...": "",
"Upload": "",
"Upload Chunk Size (MiB)": "",
"Upload Config": "",
"Upload File": "",
"Upload Image File": "",
"Upload Key file": "",
"Upload New Image File": "",
"Upload SSH Key": "",
"Uploading and Applying Config": "",
"Uploading file...": "",
"Upsmon will wait up to this many seconds in master mode for the slaves to disconnect during a shutdown situation.": "",
"Uptime": "",
"Usable Capacity": "",
"Usage": "",
"Usage collection": "",
"Usages": "",
"Use --fast-list": "",
"Use Apple-style Character Encoding": "",
"Use Custom ACME Server Directory URI": "",
"Use DHCP. Unset to manually configure a static IPv4 connection.": "",
"Use Default Domain": "",
"Use FQDN for Logging": "",
"Use Preset": "",
"Use Samba LDAP schema extensions to provide support for LDAP authentication with SMB shares. DEPRECATED: Support for legacy samba schema for LDAP has been deprecated and will be removed in a future TrueNAS version.": "",
"Use Signature Version 2": "",
"Use Sudo For ZFS Commands": "",
"Use Syslog Only": "",
"Use all disk space": "",
"Use an exported encryption key file to unlock datasets.": "",
"Use as Home Share": "",
"Use compressed WRITE records to make the stream more efficient. The destination system must also support compressed WRITE records. See <a href=\"https://linux.die.net/man/8/zfs\" target=\"_blank\">zfs(8)</a>.": "",
"Use existing disk image": "",
"Use settings from a saved replication.": "",
"Use snapshot <i>{snapshot}</i> to roll <b>{dataset}</b> back to {datetime}?": "",
"Use the <i>Log In to GMail</i> button to obtain the credentials for this form.": "",
"Use the KMIP server to manage ZFS encrypted dataset keys. The key server stores, applies, and destroys encryption keys whenever an encrypted dataset is created, when an existing key is modified, an encrypted dataset is unlocked, or an encrypted dataset is removed. Unsetting this option leaves all encryption key management with the local system.": "",
"Use the encryption properties of the root dataset.": "",
"Use the format <i>A.B.C.D/E</i> where <i>E</i> is the CIDR mask.": "",
"Use this option to allow legacy SMB clients to connect to the server. Note that SMB1 is being deprecated and it is advised to upgrade clients to operating system versions that support modern versions of the SMB protocol.": "",
"Used": "",
"Used Ports": "",
"Used Space": "",
"Used by clients in PASV mode. A default of <i>0</i> means any port above 1023.": "",
"Used to add additional <a href=\"https://linux.die.net/man/8/proftpd\" target=\"_blank\">proftpd(8)</a> parameters.": "",
"User": "",
"User Bind Path": "",
"User CN": "",
"User Data Quota ": "",
"User Distinguished Name (DN) to use for authentication.": "",
"User Domain": "",
"User Guide": "",
"User ID": "",
"User ID and Groups": "",
"User Name": "",
"User Obj": "",
"User Object Quota": "",
"User Quotas": "",
"User Two-Factor Authentication Actions": "",
"User account password for logging in to the remote system.": "",
"User account to create for CHAP authentication with the user on the remote system. Many initiators use the initiator name as the user name.": "",
"User account to which this ACL entry applies.": "",
"User accounts have an ID greater than 1000 and system accounts have an ID equal to the default port number used by the service.": "",
"User added": "",
"User deleted": "",
"User is lacking permissions to access WebUI.": "",
"User limit to Docker Hub has almost/or has been reached. Installation process may get stalled as images wouldn't be pulled. Current limit would be renewed in {seconds}. Application can still be installed.": "",
"User passed to <i>camcontrol security -u</i> to unlock SEDs": "",
"User password. Must be at least 12 and no more than 16 characters long.": "",
"User updated": "",
"User who controls the dataset. This user always has permissions to read or write the ACL and read or write attributes. Users created manually or imported from a directory service appear in the drop-down menu.": "",
"User-defined string used to decrypt the dataset. Can be used instead of an encryption key.<br> WARNING: the passphrase is the only means to decrypt the information stored in this dataset. Be sure to create a memorable passphrase or physically secure the passphrase.": "",
"Username": "",
"Username for this service.": "",
"Username on the remote system to log in <b>via Web UI</b> to setup connection.": "",
"Username on the remote system which will be used to login <b>via SSH</b>.": "",
"Usernames can be up to 32 characters long. Usernames cannot begin with a hyphen (<i>-</i>) or contain a space, tab, or these characters: <i>, : + & # % ^ ( ) ! @ ~ * ? < > =</i>. <i>$</i> can only be used as the last character of the username.": "",
"Users": "",
"Users could not be loaded": "",
"Uses one disk for parity while all other disks store data. RAIDZ1 requires at least three disks. RAIDZ is a traditional ZFS data protection scheme. \nChoose RAIDZ over dRAID when managing a smaller set of drives, where simplicity of setup and predictable disk usage are primary considerations.": "",
"Uses the SMB Service <i>NetBIOS Name</i> to advertise the server to WS-Discovery clients. This causes the computer appear in the <i>Network Neighborhood</i> of modern Windows OSes.": "",
"Uses three disks for parity while all other disks store data. RAIDZ3 requires at least five disks. RAIDZ is a traditional ZFS data protection scheme. \nChoose RAIDZ over dRAID when managing a smaller set of drives, where simplicity of setup and predictable disk usage are primary considerations.": "",
"Uses two disks for parity while all other disks store data. RAIDZ2 requires at least four disks. RAIDZ is a traditional ZFS data protection scheme. \nChoose RAIDZ over dRAID when managing a smaller set of drives, where simplicity of setup and predictable disk usage are primary considerations.": "",
"Using CSR": "",
"Using pool {name}": "",
"Using this option will replicate all snapshots which names match specified regular expression. The performance on the systems with large number of snapshots will be lower, as snapshots metadata needs to be read in order to determine snapshots creation order.": "",
"Using this option will replicate all snapshots which names match specified regular expression. The performance on the systems with large number of snapshots will be lower, as snapshots metadata needs to be read in order to determine snapshots creation order.": "",
"VDEV is highly discouraged and will result in data loss if it fails": "",
"VDEVs": "",
"VDEVs have been created through manual disk selection. To view or edit your selections, press the \"Edit Manual Disk Selection\" button below. To start again with the automated disk selection, hit the \"Reset\" button.": "",
"VDEVs not assigned": "",
"VLAN Addresses": "",
"VLAN ID": "",
"VLAN Settings": "",
"VLAN Tag": "",
"VLAN interface": "",
"VLANs": "",
"VM": "",
"VM Device Read": "",
"VM Device Write": "",
"VM Read": "",
"VM Serial Shell": "",
"VM Write": "",
"VM system time. Default is <i>Local</i>.": "",
"VM updated successfully.": "",
"VMWare Sync": "",
"VMware Snapshot Integration": "",
"VMware Snapshots": "",
"VMware Sync": "",
"Validate Certificates": "",
"Validate Connection": "",
"Validate Host Path": "",
"Validate Remote Path": "",
"Value": "",
"Value in GiB": "",
"Value must be a number": "",
"Value must be a valid email address": "",
"Value must be a {type}": "",
"Value must be greater than Range Low": "",
"Value must be greater than {label}": "",
"Var": "",
"Variable": "",
"Variable deleted.": "",
"Vdev": "",
"Vdev successfully extended.": "",
"Vdevs spans enclosure": "",
"Vendor ID": "",
"Verbose Logging": "",
"Verify": "",
"Verify Credential": "",
"Verify Email Address": "",
"Verify certificate authenticity.": "",
"Version": "",
"Version to be upgraded to": "",
"Video, < 100ms latency": "",
"Video, < 10ms latency": "",
"View All": "",
"View All S.M.A.R.T. Tests": "",
"View All Scrub Tasks": "",
"View All Test Results": "",
"View Disk Space Reports": "",
"View Enclosure": "",
"View Logs": "",
"View More": "",
"View Reports": "",
"View/Download CSR": "",
"View/Download Certificate": "",
"View/Download Key": "",
"Virtual CPUs": "",
"Virtual IP Address (Failover Address)": "",
"Virtual Machines": "",
"Virtual machine created": "",
"Virtualization": "",
"Virtualization is not supported": "",
"Visible": "",
"Volume Size": "",
"Volume size cannot be zero.": "",
"WARNING": "",
"WARNING: A failover will temporarily interrupt system services.": "",
"WARNING: Adding data VDEVs with different numbers of disks is not recommended.": "",
"WARNING: Based on the pool topology, {size} is the minimum recommended record size. Choosing a smaller size can reduce system performance.": "",
"WARNING: Exporting/disconnecting pool <i>{pool}</i>. Data on the pool will not be available after export. Data on the pool disks can be destroyed by setting the <b>Destroy data</b> option. Back up critical data <b>before</b> exporting/disconnecting the pool.": "",
"WARNING: Keys for all nested datasets with encryption applied will be downloaded.": "",
"WARNING: Only the key for the dataset in question will be downloaded.": "",
"WARNING: These unknown processes will be terminated while exporting the pool.": "",
"Wait to start VM until VNC client connects.": "",
"Waiting": "",
"Waiting for Active TrueNAS controller to come up...": "",
"Warning": "",
"Warning!": "",
"Warning: Debugs may contain log files with personal information such as usernames or other identifying information about your system. Please review debugs and redact any sensitive information before sharing with external entities.": "",
"Warning: iSCSI Target is already in use.</font><br>": "",
"Warning: {n} of {total} boot environments could not be deleted.": "",
"Warning: {n} of {total} docker images could not be deleted.": "",
"Warning: {n} of {total} docker images could not be updated.": "",
"Warning: {n} of {total} snapshots could not be deleted.": "",
"Warnings": "",
"Watch List": "",
"Weak Ciphers": "",
"Web Interface": "",
"Web Interface HTTP -> HTTPS Redirect": "",
"Web Interface HTTP Port": "",
"Web Interface HTTPS Port": "",
"Web Interface IPv4 Address": "",
"Web Interface IPv6 Address": "",
"Web Shell Access": "",
"WebDAV": "",
"WebDAV Service": "",
"WebDAV account password.": "",
"WebDAV account username.": "",
"Webhook URL": "",
"Wed": "",
"Wednesday": "",
"Week(s)": "",
"Weeks": "",
"What and When": "",
"What and Where": "",
"When": "",
"When a group is selected, the <i>root</i> user is also limited to the permissions of that group.": "",
"When a user is selected, the <i>root</i> user is limited to the permissions of that user.": "",
"When battery power is low or the shutdown timer ends, enter the custom command to overrule the default shutdown command.": "",
"When both days of month and days of week have restrictions, these restrictions work as an OR condition.": "",
"When checked it will ensure that the guest always has access to a video device. For headless installations like ubuntu server this is required for the guest to operate properly. However for cases where consumer would like to use GPU passthrough and does not want a display device added should uncheck this.": "",
"When checked, the primary group membership is fetched from the LDAP attributes (gidNumber). When not checked, the primary group membership is calculated via the \"primaryGroupID\" LDAP attribute.": "",
"When checked, winbind will retrieve the login shell and home directory from the LDAP attributes. When not checked or when the AD LDAP entry lacks the SFU attributes the smb4.conf parameters <code>template shell</code> and <code>template homedir</code> are used.": "",
"When not specified, guest system is given fixed amount of memory specified above.\nWhen minimum memory is specified, guest system is given memory within range between minimum and fixed as needed.": "",
"When number of vcpus is equal to number of cpus in CPU set vcpus can be automatically pinned into CPU set. Pinning is done by mapping each vcpu into single cpu number in following the order in CPU set. This will improve CPU cache locality and can reduce possible stutter in GPU passthrough VMs.": "",
"When replicated snapshots are deleted from the destination system: <br> <i>Same as Source</i>: use the configured <i>Snapshot Lifetime</i> value from the source dataset periodic snapshot task.<br> <i>Never Delete</i>: never delete snapshots from the destination system.<br> <i>Custom</i>: set a how long a snapshot remains on the destination system. Enter a number and choose a measure of time from the drop-down.": "",
"When replicated snapshots are deleted from the destination system:<ul> <li><i>Same as Source</i>: use the <b>Snapshot Lifetime</b> from the source periodic snapshot task.</li> <li><i>Custom</i>: define a <b>Snapshot Lifetime</b> for the destination system.</li> <li><i>None</i>: never delete snapshots from the destination system.</li>": "",
"When set, a local user is only allowed access to their home directory if they are a member of the <i>wheel</i> group.": "",
"When set, rsync is run recursively, preserving symlinks, permissions, modification times, group, and special files. When run as root, owner, device files, and special files are also preserved. Equivalent to passing the flags <i>-rlptgoD</i> to rsync.": "",
"When set, the common name in the certificate must match the FQDN of the host.": "",
"When set, usernames do not include a domain name. Unset to force domain names to be prepended to user names. One possible reason for unsetting this value is to prevent username collisions when Allow Trusted Domains is set and there are identical usernames in more than one domain.": "",
"When this checkbox is checked, domain is inherited from DHCP.": "",
"When using a proxy, enter the proxy information for the network in the format <i>http://my.proxy.server:3128</i> or <i>http://user:password@my.proxy.server:3128</i>": "",
"When using a virtual host, this is also used as the Kerberos principal name.": "",
"Who": "",
"Who this ACL entry applies to, shown as a <a href=\"https://docs.microsoft.com/en-us/windows/win32/secauthz/security-identifiers\" target=\"_blank\">Windows Security Identifier</a>. Either a <i>SID</i> or a <i>Domain</i> and <i>Name</i> is required for this ACL.": "",
"Who this ACL entry applies to, shown as a user name. Requires adding the user <i>Domain</i>.": "",
"Widget data is not available": "",
"Width": "",
"Will be automatically destroyed at {datetime} by periodic snapshot task": "",
"Will not be destroyed automatically": "",
"Winbind NSS Info": "",
"Window": "",
"Windows": "",
"Windows (SMB) Shares": "",
"Wipe": "",
"Wipe Disk {name}": "",
"Wipe this disk?": "",
"Wiping disk...": "",
"With this configuration, the existing directory {path} will be used as a home directory without creating a new directory for the user.": "",
"With your selection, no GPU is available for the host to consume.": "",
"Wizard": "",
"Workgroup": "",
"Workloads": "",
"Would you like to add a Service Principal Name (SPN) now?": "",
"Would you like to ignore this error and try again?": "",
"Would you like to restart the SMB Service?": "",
"Write": "",
"Write ACL": "",
"Write Attributes": "",
"Write Data": "",
"Write Errors": "",
"Write Named Attributes": "",
"Write Owner": "",
"Wrong username or password. Please try again.": "",
"Xen initiator compat mode": "",
"Yandex": "",
"Yandex <a href=\"https://tech.yandex.com/direct/doc/dg-v4/concepts/auth-token-docpage/\" target=\"_blank\">Access Token</a>.": "",
"Year(s)": "",
"Years": "",
"Yes": "",
"Yes I understand the risks": "",
"Yesterday": "",
"You are trying to open:<br>\n{url}<br><br>\nBecause HTTP to HTTPS redirect is enabled in settings your browser will force HTTPS connection for this URL.<br>\nThis may create issues if app does not support secure connections.<br>\n<br>\nYou can try opening app url in an incognito mode.<br>\nAlternatively you can disable redirect in Settings, clear browser cache and try again.": "",
"You are using an insecure connection. <a href=\"{url}\">Switch to HTTPS</a> for secure access.": "",
"You can clear reporting database and start data collection immediately.": "",
"You can join the <a href=\"https://www.truenas.com/newsletter/\" target=\"_blank\" class=\"external-link\">TrueNAS Newsletter</a> for monthly updates and latest developments.": "",
"You can search both for local groups as well as groups from Active Directory.Press ENTER to separate entries.": "",
"You can search both for local users as well as users from Active Directory.Press ENTER to separate entries.": "",
"You do not have the permissions to access the requested information. If you think this was a mistake, please contact your system administrator.": "",
"You have changed one of the settings that require Kubernetes cluster re-initialization. Please be aware that this will delete installed apps and their data.": "",
"You have hidden all of your available widgets. Use the dashboard configuration form to add widgets.": "",
"You have left the domain.": "",
"You have successfully added credentials.": "",
"Your query didn't return any results. Please try again.": "",
"ZFS": "",
"ZFS Cache": "",
"ZFS Deduplication": "",
"ZFS Encryption": "",
"ZFS Filesystem": "",
"ZFS Health": "",
"ZFS Info": "",
"ZFS L2ARC read-cache that can be used with fast devices to accelerate read operations.": "",
"ZFS LOG device that can improve speeds of synchronous writes. Optional write-cache that can be removed.": "",
"ZFS Replication to another TrueNAS": "",
"ZFS pools must conform to strict naming <a href=\"https://docs.oracle.com/cd/E23824_01/html/821-1448/gbcpt.html\" target=\"_blank\">conventions</a>. Choose a memorable name.": "",
"ZFS/SED keys synced between KMIP Server and TN database.": "",
"Zoom In": "",
"Zoom Out": "",
"Zvol": "",
"Zvol Details": "",
"Zvol Location": "",
"Zvol Space Management": "",
"Zvol name": "",
"Zvol «{name}» updated.": "",
"by ancestor": "",
"cores": "",
"dRAID is a ZFS feature that boosts resilver speed and load distribution. Due to fixed stripe width disk space efficiency may be substantially worse with small files. \nOpt for dRAID over RAID-Z when handling large-capacity drives and extensive disk environments for enhanced performance.": "",
"dRAID1": "",
"dRAID2": "",
"dRAID3": "",
"details": "",
"everyone@": "",
"expires in {n, plural, one {# day} other {# days} }": "",
"group@": "",
"gzip (default level, 6)": "",
"gzip-1 (fastest)": "",
"gzip-9 (maximum, slow)": "",
"iSCSI": "",
"iSCSI Group": "",
"iSCSI Wizard": "",
"iSCSI listen port": "",
"iSCSI supports multiple authentication methods that are used by the target to discover valid devices. <i>None</i> allows anonymous discovery while <i>CHAP</i> and <i>Mutual CHAP</i> require authentication.": "",
"iXsystems does not audit or otherwise validate the contents of third-party applications catalogs. It is incumbent on the user to verify that the new catalog is from a trusted source and that the third-party properly audits its chart contents. Failure to exercise due diligence may expose the user and their data to some or all of the following:<br/> <ul>\n <li>Malicious software</li>\n <li>Broken services on TrueNAS host</li>\n <li>Service disruption on TrueNAS host</li>\n <li>Broken filesystem permissions on Host or within application</li>\n <li>Unexpected deletion of user data</li>\n <li>Unsafe service configuration in application</li>\n <li>Degradation of TrueNAS host performance and stability</li>\n </ul>": "",
"last run {date}": "",
"lz4 (fastest)": "",
"lz4 (recommended)": "",
"lzjb (legacy, not recommended)": "",
"mountd(8) bind port": "",
"never ran": "",
"of": "",
"on this enclosure": "",
"or": "",
"overview": "",
"owner@": "",
"pCloud": "",
"pbkdf2iters": "",
"pigz (all rounder)": "",
"plzip (best compression)": "",
"rpc.lockd(8) bind port": "",
"rpc.statd(8) bind port": "",
"threads": "",
"to another TrueNAS": "",
"to cloud": "",
"total available": "",
"vdev": "",
"was successfully attached.": "",
"zle (runs of zeros)": "",
"zstd (default level, 3)": "",
"zstd-5 (slow)": "",
"zstd-7 (very slow)": "",
"zstd-fast (default level, 1)": "",
"{ n, plural, one {# snapshot} other {# snapshots} }": "",
"{app} Catalog Summary": "",
"{catalog} Catalog": "",
"{checked} exporter: {name}": "",
"{comparator} (Contains)": "",
"{comparator} (Ends With)": "",
"{comparator} (Equals)": "",
"{comparator} (Greater Than or Equal To)": "",
"{comparator} (Greater Than)": "",
"{comparator} (In)": "",
"{comparator} (Less Than or Equal To)": "",
"{comparator} (Less Than)": "",
"{comparator} (Not Ends With)": "",
"{comparator} (Not Equals)": "",
"{comparator} (Not In)": "",
"{comparator} (Not Starts With)": "",
"{comparator} (Starts With)": "",
"{count} snapshots found.": "",
"{cpuPercentage}% Avg. Usage": "",
"{days, plural, =1 {# day} other {# days}}": "",
"{duration} remaining": "",
"{eligible} of {total} existing snapshots of dataset {targetDataset} would be replicated with this task.": "",
"{email} via {server}": "",
"{failedCount} of {allCount, plural, =1 {# task} other {# tasks}} failed": "",
"{field} is required": "",
"{hours, plural, =1 {# hour} other {# hours}}": "",
"{interfaceName} must start with \"{prefix}\" followed by an unique number": "",
"{key} Key": "",
"{license} contract, expires {date}": "",
"{minutes, plural, =1 {# minute} other {# minutes}}": "",
"{n, plural, =0 {No Errors} one {# Error} other {# Errors}}": "",
"{n, plural, =0 {No Tasks} one {# Task} other {# Tasks}} Configured": "",
"{n, plural, =0 {No open files} one {# open file} other {# open files}}": "",
"{n, plural, one {# CPU} other {# CPUs}}": "",
"{n, plural, one {# GPU} other {# GPUs}} isolated": "",
"{n, plural, one {# boot environment} other {# boot environments}} has been deleted.": "",
"{n, plural, one {# core} other {# cores}}": "",
"{n, plural, one {# docker image} other {# docker images}} has been deleted.": "",
"{n, plural, one {# docker image} other {# docker images}} has been updated.": "",
"{n, plural, one {# thread} other {# threads}}": "",
"{name} Devices": "",
"{name} Sessions": "",
"{n}": "",
"{n} (applies to descendants)": "",
"{n} RPM": "",
"{n} from {dataset}": "",
"{n} more": "",
"{n}% Uploaded": "",
"{seconds, plural, =1 {# second} other {# seconds}}": "",
"{serviceName} service failed to start.": "",
"{serviceName} service failed to stop.": "",
"{service} Service is not currently running. Start the service now?": "",
"{size} {type} at {location}": "",
"{tasks, plural, =1 {# receive task} other {# receive tasks}}": "",
"{tasks, plural, =1 {# send task} other {# send tasks}}": "",
"{tasks, plural, =1 {# successful task} other {# successful tasks}} this week": "",
"{type} VDEVs": "",
"{type} at {location}": "",
"{type} | {vdevWidth} wide | ": "",
"{used} of {total} ({used_pct})": "",
"{version} is available!": "",
"<a href=\"https://docs.aws.amazon.com/AmazonS3/latest/dev/WebsiteEndpoints.html\" target=\"_blank\">S3 API endpoint URL</a>. When using AWS, the endpoint field can be empty to use the default endpoint for the region, and available buckets are automatically fetched. Refer to the AWS Documentation for a list of <a href=\"https://docs.aws.amazon.com/general/latest/gr/rande.html#s3_website_region_endpoints target=\"_blank\">Simple Storage Service Website Endpoints</a>.": "<a href=\"https://docs.aws.amazon.com/AmazonS3/latest/dev/WebsiteEndpoints.html\" target=\"_blank\">S3 API endpoint URL</a>. When using AWS, the endpoint field can be empty to use the default endpoint for the region, and available buckets are automatically fetched. Refer to the AWS Documentation for a list of <a href=\"https://docs.aws.amazon.com/general/latest/gr/rande.html\\#s3_website_region_endpoints target=\"_blank\">Simple Storage Service Website Endpoints</a>.",
"<a href=\"https://rclone.org/swift/#swift-region\" target=\"_blank\">(rclone documentation)</a>.": "<a href=\"https://rclone.org/swift/#swift-region\" target=\"_blank\">(rclone documentation)</a>.",
"A User Access Token for <a href=\"https://developer.box.com/\" target=\"_blank\">Box</a>. An <a href=\"https://developer.box.com/guides/authentication/tokens/access-tokens/\" target=\"_blank\">access token</a> enables Box to verify a request belongs to an authorized session. Example token: <i>T9cE5asGnuyYCCqIZFoWjFHvNbvVqHjl</i>.": "A User Access Token for <a href=\"https://developer.box.com/\" target=\"_blank\">Box</a>. An <a href=\"https://developer.box.com/guides/authentication/tokens/access-tokens/\" target=\"_blank\">access token</a> enables Box to verify a request belongs to an authorized session. Example token: <i>T9cE5asGnuyYCCqIZFoWjFHvNbvVqHjl</i>.",
"A single bandwidth limit or bandwidth limit schedule in rclone format. Separate entries by pressing <code>Enter</code>. Example: <samp>08:00,512 12:00,10MB 13:00,512 18:00,30MB 23:00,off</samp>. Units can be specified with a suffix of <samp>b</samp>, <samp>k</samp> (default), <samp>M</samp>, or <samp>G</samp>. See <a href=\"https://rclone.org/docs/#bwlimit-bandwidth-spec\" target=\"_blank\">rclone --bwlimit</a>.": "A single bandwidth limit or bandwidth limit schedule in rclone format. Separate entries by pressing <code>Enter</code>. Example: <samp>08:00,512 12:00,10MB 13:00,512 18:00,30MB 23:00,off</samp>. Units can be specified with a suffix of <samp>b</samp>, <samp>k</samp> (default), <samp>M</samp>, or <samp>G</samp>. See <a href=\"https://rclone.org/docs/\\#bwlimit-bandwidth-spec\" target=\"_blank\">rclone --bwlimit</a>.",
"Additional <a href=\"https://rsync.samba.org/ftp/rsync/rsync.html\" target=\"_blank\">rsync(1)</a> options to include. Separate entries by pressing <code>Enter</code>.<br> Note: The \"*\" character must be escaped with a backslash (\\*.txt) or used inside single quotes ('*.txt').": "Additional <a href=\"https://rsync.samba.org/ftp/rsync/rsync.html\" target=\"_blank\">rsync(1)</a> options to include. Separate entries by pressing <code>Enter</code>.<br> Note: The \"*\" character must be escaped with a backslash (\\\\*.txt) or used inside single quotes ('*.txt').",
"Auth Token from alternate authentication - optional <a href=\"https://rclone.org/swift/#swift-region\" target=\"_blank\">(rclone documentation)</a>.": "Auth Token from alternate authentication - optional <a href=\"https://rclone.org/swift/#swift-region\" target=\"_blank\">(rclone documentation)</a>.",
"AuthVersion - optional - set to (1,2,3) if your auth URL has no version <a href=\"https://rclone.org/swift/#swift-region\" target=\"_blank\">(rclone documentation)</a>.": "AuthVersion - optional - set to (1,2,3) if your auth URL has no version <a href=\"https://rclone.org/swift/#swift-region\" target=\"_blank\">(rclone documentation)</a>.",
"Authentication URL for the server. This is the OS_AUTH_URL from an <a href=\"https://rclone.org/swift/#configuration-from-an-openstack-credentials-file\" target=\"_blank\">OpenStack credentials file</a>.": "Authentication URL for the server. This is the OS_AUTH_URL from an <a href=\"https://rclone.org/swift/\\#configuration-from-an-openstack-credentials-file\" target=\"_blank\">OpenStack credentials file</a>.",
"Change the default password to improve system security. The new password cannot contain a space or <b>#</b>.": "Change the default password to improve system security. The new password cannot contain a space or <b>\\#</b>.",
"Encrypt (<i>PUSH</i>) or decrypt (<i>PULL</i>) file names with the rclone <a href=\"https://rclone.org/crypt/#file-name-encryption-modes\" target=\"_blank\">\"Standard\" file name encryption mode</a>. The original directory structure is preserved. A filename with the same name always has the same encrypted filename.<br><br> <i>PULL</i> tasks that have <b>Filename Encryption</b> enabled and an incorrect <b>Encryption Password</b> or <b>Encryption Salt</b> will not transfer any files but still report that the task was successful. To verify that files were transferred successfully, click the finished task status to see a list of transferred files.": "Encrypt (<i>PUSH</i>) or decrypt (<i>PULL</i>) file names with the rclone <a href=\"https://rclone.org/crypt/\\#file-name-encryption-modes\" target=\"_blank\">\"Standard\" file name encryption mode</a>. The original directory structure is preserved. A filename with the same name always has the same encrypted filename.<br><br> <i>PULL</i> tasks that have <b>Filename Encryption</b> enabled and an incorrect <b>Encryption Password</b> or <b>Encryption Salt</b> will not transfer any files but still report that the task was successful. To verify that files were transferred successfully, click the finished task status to see a list of transferred files.",
"Endpoint type to choose from the service catalogue. <i>Public</i> is recommended, see the <a href=\"https://rclone.org/swift/#swift-region\" target=\"_blank\">rclone documentation</a>.": "Endpoint type to choose from the service catalogue. <i>Public</i> is recommended, see the <a href=\"https://rclone.org/swift/#swift-region\" target=\"_blank\">rclone documentation</a>.",
"Enter or paste the <a href=\"https://portal.victorops.com/public/api-docs.html#/Routing32Keys\" target=\"_blank\">VictorOps routing key</a>.": "Enter or paste the <a href=\"https://portal.victorops.com/public/api-docs.html\\#/Routing32Keys\" target=\"_blank\">VictorOps routing key</a>.",
"Group name cannot begin with a hyphen (<i>-</i>) or contain a space, tab, or these characters: <i>, : + & # % ^ ( ) ! @ ~ * ? < > =</i>. <i>$</i> can only be used as the last character of the username.": "Group name cannot begin with a hyphen (<i>-</i>) or contain a space, tab, or these characters: <i>, : + & \\# % ^ ( ) ! @ ~ * ? < > =</i>. <i>$</i> can only be used as the last character of the username.",
"Icon file to use as the profile picture for new messages. Example: <i>https://mattermost.org/wp-content/uploads/2016/04/icon.png</i>.<br> Requires configuring Mattermost to <a href=\"https://docs.mattermost.com/administration/config-settings.html#enable-integrations-to-override-profile-picture-icons\" target=\"_blank\">override profile picture icons</a>.": "Icon file to use as the profile picture for new messages. Example: <i>https://mattermost.org/wp-content/uploads/2016/04/icon.png</i>.<br> Requires configuring Mattermost to <a href=\"https://docs.mattermost.com/administration/config-settings.html\\#enable-integrations-to-override-profile-picture-icons\" target=\"_blank\">override profile picture icons</a>.",
"Initiators allowed access to this system. Enter an <a href=\"https://tools.ietf.org/html/rfc3720#section-3.2.6\" target=\"_blank\">iSCSI Qualified Name (IQN)</a> and click <i>+</i> to add it to the list. Example: <i>iqn.1994-09.org.freebsd:freenas.local</i>": "Initiators allowed access to this system. Enter an <a href=\"https://tools.ietf.org/html/rfc3720\\#section-3.2.6\" target=\"_blank\">iSCSI Qualified Name (IQN)</a> and click <i>+</i> to add it to the list. Example: <i>iqn.1994-09.org.freebsd:freenas.local</i>",
"Name of the <a href=\"https://docs.mattermost.com/help/getting-started/organizing-conversations.html#managing-channels\" target=\"_blank\">channel</a> to receive notifications. This overrides the default channel in the incoming webhook settings.": "Name of the <a href=\"https://docs.mattermost.com/help/getting-started/organizing-conversations.html\\#managing-channels\" target=\"_blank\">channel</a> to receive notifications. This overrides the default channel in the incoming webhook settings.",
"Number of simultaneous file transfers. Enter a number based on the available bandwidth and destination system performance. See <a href=\"https://rclone.org/docs/#transfers-n\" target=\"_blank\">rclone --transfers</a>.": "Number of simultaneous file transfers. Enter a number based on the available bandwidth and destination system performance. See <a href=\"https://rclone.org/docs/\\#transfers-n\" target=\"_blank\">rclone --transfers</a>.",
"Openstack API key or password. This is the OS_PASSWORD from an <a href=\"https://rclone.org/swift/#configuration-from-an-openstack-credentials-file\" target=\"_blank\">OpenStack credentials file</a>.": "Openstack API key or password. This is the OS_PASSWORD from an <a href=\"https://rclone.org/swift/\\#configuration-from-an-openstack-credentials-file\" target=\"_blank\">OpenStack credentials file</a>.",
"Openstack user name for login. This is the OS_USERNAME from an <a href=\"https://rclone.org/swift/#configuration-from-an-openstack-credentials-file\" target=\"_blank\">OpenStack credentials file</a>.": "Openstack user name for login. This is the OS_USERNAME from an <a href=\"https://rclone.org/swift/\\#configuration-from-an-openstack-credentials-file\" target=\"_blank\">OpenStack credentials file</a>.",
"Region name - optional <a href=\"https://rclone.org/swift/#swift-region\" target=\"_blank\">(rclone documentation)</a>.": "Region name - optional <a href=\"https://rclone.org/swift/#swift-region\" target=\"_blank\">(rclone documentation)</a>.",
"Set to restrict SSH access in certain circumstances to only members of BUILTIN\\Administrators": "Set to restrict SSH access in certain circumstances to only members of BUILTIN\\\\Administrators",
"Specify the PCI device to pass thru (bus#/slot#/fcn#).": "Specify the PCI device to pass thru (bus\\#/slot\\#/fcn\\#).",
"Storage URL - optional <a href=\"https://rclone.org/swift/#swift-region\" target=\"_blank\">(rclone documentation)</a>.": "Storage URL - optional <a href=\"https://rclone.org/swift/#swift-region\" target=\"_blank\">(rclone documentation)</a>.",
"Telegram Bot API Token (<a href=\"https://core.telegram.org/bots#3-how-do-i-create-a-bot\" target=\"_blank\">How to create a Telegram Bot</a>)": "Telegram Bot API Token (<a href=\"https://core.telegram.org/bots\\#3-how-do-i-create-a-bot\" target=\"_blank\">How to create a Telegram Bot</a>)",
"Tenant ID - optional for v1 auth, this or tenant required otherwise <a href=\"https://rclone.org/swift/#swift-region\" target=\"_blank\">(rclone documentation)</a>.": "Tenant ID - optional for v1 auth, this or tenant required otherwise <a href=\"https://rclone.org/swift/#swift-region\" target=\"_blank\">(rclone documentation)</a>.",
"Tenant domain - optional <a href=\"https://rclone.org/swift/#swift-region\" target=\"_blank\">(rclone documentation)</a>.": "Tenant domain - optional <a href=\"https://rclone.org/swift/#swift-region\" target=\"_blank\">(rclone documentation)</a>.",
"The OU in which new computer accounts are created. The OU string is read from top to bottom without RDNs. Slashes (\"/\") are used as delimiters, like <samp>Computers/Servers/NAS</samp>. The backslash (\"\\\") is used to escape characters but not as a separator. Backslashes are interpreted at multiple levels and might require doubling or even quadrupling to take effect. When this field is blank, new computer accounts are created in the Active Directory default OU.": "The OU in which new computer accounts are created. The OU string is read from top to bottom without RDNs. Slashes (\"/\") are used as delimiters, like <samp>Computers/Servers/NAS</samp>. The backslash (\"\\\\\") is used to escape characters but not as a separator. Backslashes are interpreted at multiple levels and might require doubling or even quadrupling to take effect. When this field is blank, new computer accounts are created in the Active Directory default OU.",
"This is the OS_TENANT_NAME from an <a href=\"https://rclone.org/swift/#configuration-from-an-openstack-credentials-file\" target=\"_blank\">OpenStack credentials file</a>.": "This is the OS_TENANT_NAME from an <a href=\"https://rclone.org/swift/\\#configuration-from-an-openstack-credentials-file\" target=\"_blank\">OpenStack credentials file</a>.",
"Upload a Google <a href=\"https://rclone.org/googlecloudstorage/#service-account-support\" target=\"_blank\">Service Account credential file</a>. The file is created with the <a href=\"https://console.cloud.google.com/apis/credentials\" target=\"_blank\">Google Cloud Platform Console</a>.": "Upload a Google <a href=\"https://rclone.org/googlecloudstorage/\\#service-account-support\" target=\"_blank\">Service Account credential file</a>. The file is created with the <a href=\"https://console.cloud.google.com/apis/credentials\" target=\"_blank\">Google Cloud Platform Console</a>.",
"Use <a href=\"https://rclone.org/crypt/\" target=\"_blank\">rclone crypt</a> to manage data encryption during <i>PUSH</i> or <i>PULL</i> transfers:<br><br> <i>PUSH:</i> Encrypt files before transfer and store the encrypted files on the remote system. Files are encrypted using the <b>Encryption Password</b> and <b>Encryption Salt</b> values.<br><br> <i>PULL:</i> Decrypt files that are being stored on the remote system before the transfer. Transferring the encrypted files requires entering the same <b>Encryption Password</b> and <b>Encryption Salt</b> that was used to encrypt the files.<br><br> Additional details about the encryption algorithm and key derivation are available in the <a href=\"https://rclone.org/crypt/#file-formats\" target=\"_blank\">rclone crypt File formats documentation</a>.": "Use <a href=\"https://rclone.org/crypt/\" target=\"_blank\">rclone crypt</a> to manage data encryption during <i>PUSH</i> or <i>PULL</i> transfers:<br><br> <i>PUSH:</i> Encrypt files before transfer and store the encrypted files on the remote system. Files are encrypted using the <b>Encryption Password</b> and <b>Encryption Salt</b> values.<br><br> <i>PULL:</i> Decrypt files that are being stored on the remote system before the transfer. Transferring the encrypted files requires entering the same <b>Encryption Password</b> and <b>Encryption Salt</b> that was used to encrypt the files.<br><br> Additional details about the encryption algorithm and key derivation are available in the <a href=\"https://rclone.org/crypt/\\#file-formats\" target=\"_blank\">rclone crypt File formats documentation</a>.",
"User ID to log in - optional - most swift systems use user and leave this blank <a href=\"https://rclone.org/swift/#swift-region\" target=\"_blank\">(rclone documentation)</a>.": "User ID to log in - optional - most swift systems use user and leave this blank <a href=\"https://rclone.org/swift/#swift-region\" target=\"_blank\">(rclone documentation)</a>.",
"User domain - optional <a href=\"https://rclone.org/swift/#swift-region\" target=\"_blank\">(rclone documentation)</a>.": "User domain - optional <a href=\"https://rclone.org/swift/#swift-region\" target=\"_blank\">(rclone documentation)</a>.",
"Username of the SNMP <a href=\"https://pysnmp.readthedocs.io/en/latest/docs/pysnmp-hlapi-tutorial.html\" target=\"_blank\">User-based Security Model (USM)</a> user.": "Username of the SNMP <a href=\"http://snmplabs.com/pysnmp/docs/api-reference.html\\#pysnmp.hlapi.UsmUserData\" target=\"_blank\">User-based Security Model (USM)</a> user.",
"[Use fewer transactions in exchange for more RAM.](https://rclone.org/docs/#fast-list) This can also speed up or slow down the transfer.": "[Use fewer transactions in exchange for more RAM.](https://rclone.org/docs/\\#fast-list) This can also speed up or slow down the transfer."
}