"Method of snapshot transfer:<ul> <li><i>SSH</i> is supported by most systems. It requires a previously created connection in <b>System > SSH Connections</b>.</li> <li><i>SSH+NETCAT</i> uses SSH to establish a connection to the destination system, then uses <a href=\"https://github.com/truenas/py-libzfs\" target=\"_blank\">py-libzfs</a> to send an unencrypted data stream for higher transfer speeds. This only works when replicating to a FreeNAS, TrueNAS, or other system with <i>py-libzfs</i> installed.</li> <li><i>LOCAL</i> efficiently replicates snapshots to another dataset on the same system without using the network.</li> <li><i>LEGACY</i> uses the legacy replication engine from FreeNAS 11.2 and earlier.</li></ul>":"",
"Method of snapshot transfer:<ul> <li><i>SSH</i> is supported by most systems. It requires a previously created connection in <b>System > SSH Connections</b>.</li> <li><i>SSH+NETCAT</i> uses SSH to establish a connection to the destination system, then uses <a href=\"https://github.com/truenas/py-libzfs\" target=\"_blank\">py-libzfs</a> to send an unencrypted data stream for higher transfer speeds. This only works when replicating to a TrueNAS, or other system with <i>py-libzfs</i> installed.</li> <li><i>LOCAL</i> efficiently replicates snapshots to another dataset on the same system without using the network.</li> <li><i>LEGACY</i> uses the legacy replication engine from FreeNAS 11.2 and earlier.</li></ul>":"",
"Metrics":"",
"MiB":"",
"MiB. Units smaller than MiB are not allowed.":"",
...
...
@@ -2551,7 +2551,7 @@
"Privacy Passphrase":"",
"Privacy Protocol":"",
"Private Key":"",
"Privileges are the same as the guest account. Guest access is disabled by default in Windows 10 version 1709 and Windows Server version 1903. Additional client-side configuration is required to provide guest access to these clients.<br><br> <i>MacOS clients:</i> Attempting to connect as a user that does not exist in FreeNAS <i>does not</i> automatically connect as the guest account. The <b>Connect As:</b> <i>Guest</i> option must be specifically chosen in MacOS to log in as the guest account. See the <a href=\"https://support.apple.com/guide/mac-help/connect-mac-shared-computers-servers-mchlp1140/\" target=\"_blank\">Apple documentation</a> for more details.":"",
"Privileges are the same as the guest account. Guest access is disabled by default in Windows 10 version 1709 and Windows Server version 1903. Additional client-side configuration is required to provide guest access to these clients.<br><br> <i>MacOS clients:</i> Attempting to connect as a user that does not exist in TrueNAS <i>does not</i> automatically connect as the guest account. The <b>Connect As:</b> <i>Guest</i> option must be specifically chosen in MacOS to log in as the guest account. See the <a href=\"https://support.apple.com/guide/mac-help/connect-mac-shared-computers-servers-mchlp1140/\" target=\"_blank\">Apple documentation</a> for more details.":"",
"Proactive Support":"",
"Proactive support settings is not available.":"",
"Proceed":"",
...
...
@@ -3004,7 +3004,7 @@
"Select the user to control the dataset. Users created manually or imported from a directory service appear in the drop-down menu.":"",
"Select the user to run the rsync task. The user selected must have permissions to write to the specified directory on the remote host.":"",
"Select the value or enter a value between <i>0</i> and <i>1023</i>. Some initiators expect a value below <i>256</i>. Leave this field blank to automatically assign the next available ID.":"",
"Select when the command or script runs:<br> <i>Pre Init</i> is early in the boot process, after mounting filesystems and starting networking.<br> <i>Post Init</i> is at the end of the boot process, before FreeNAS services start.<br> <i>Shutdown</i> is during the system power off process.":"",
"Select when the command or script runs:<br> <i>Pre Init</i> is early in the boot process, after mounting filesystems and starting networking.<br> <i>Post Init</i> is at the end of the boot process, before TrueNAS services start.<br> <i>Shutdown</i> is during the system power off process.":"",
"Select which existing initiator group has access to the target.":"",
"Select {this} to include all {these} addresses. When this has been chosen, additional addresses cannot be selected.":"",
"Selecting a dataset to use with Minio <strong>removes all existing permissions for the dataset and any nested directories!</strong> Permissions are reset to minio:minio. To avoid dataset permissions conflicts, please create a separate, dedicated dataset for Minio.":"",
"Method of snapshot transfer:<ul> <li><i>SSH</i> is supported by most systems. It requires a previously created connection in <b>System > SSH Connections</b>.</li> <li><i>SSH+NETCAT</i> uses SSH to establish a connection to the destination system, then uses <a href=\"https://github.com/truenas/py-libzfs\" target=\"_blank\">py-libzfs</a> to send an unencrypted data stream for higher transfer speeds. This only works when replicating to a FreeNAS, TrueNAS, or other system with <i>py-libzfs</i> installed.</li> <li><i>LOCAL</i> efficiently replicates snapshots to another dataset on the same system without using the network.</li> <li><i>LEGACY</i> uses the legacy replication engine from FreeNAS 11.2 and earlier.</li></ul>":"",
"Method of snapshot transfer:<ul> <li><i>SSH</i> is supported by most systems. It requires a previously created connection in <b>System > SSH Connections</b>.</li> <li><i>SSH+NETCAT</i> uses SSH to establish a connection to the destination system, then uses <a href=\"https://github.com/truenas/py-libzfs\" target=\"_blank\">py-libzfs</a> to send an unencrypted data stream for higher transfer speeds. This only works when replicating to a TrueNAS, or other system with <i>py-libzfs</i> installed.</li> <li><i>LOCAL</i> efficiently replicates snapshots to another dataset on the same system without using the network.</li> <li><i>LEGACY</i> uses the legacy replication engine from FreeNAS 11.2 and earlier.</li></ul>":"",
"Metrics":"",
"MiB":"",
"MiB. Units smaller than MiB are not allowed.":"",
...
...
@@ -2551,7 +2551,7 @@
"Privacy Passphrase":"",
"Privacy Protocol":"",
"Private Key":"",
"Privileges are the same as the guest account. Guest access is disabled by default in Windows 10 version 1709 and Windows Server version 1903. Additional client-side configuration is required to provide guest access to these clients.<br><br> <i>MacOS clients:</i> Attempting to connect as a user that does not exist in FreeNAS <i>does not</i> automatically connect as the guest account. The <b>Connect As:</b> <i>Guest</i> option must be specifically chosen in MacOS to log in as the guest account. See the <a href=\"https://support.apple.com/guide/mac-help/connect-mac-shared-computers-servers-mchlp1140/\" target=\"_blank\">Apple documentation</a> for more details.":"",
"Privileges are the same as the guest account. Guest access is disabled by default in Windows 10 version 1709 and Windows Server version 1903. Additional client-side configuration is required to provide guest access to these clients.<br><br> <i>MacOS clients:</i> Attempting to connect as a user that does not exist in TrueNAS <i>does not</i> automatically connect as the guest account. The <b>Connect As:</b> <i>Guest</i> option must be specifically chosen in MacOS to log in as the guest account. See the <a href=\"https://support.apple.com/guide/mac-help/connect-mac-shared-computers-servers-mchlp1140/\" target=\"_blank\">Apple documentation</a> for more details.":"",
"Proactive Support":"",
"Proactive support settings is not available.":"",
"Proceed":"",
...
...
@@ -3004,7 +3004,7 @@
"Select the user to control the dataset. Users created manually or imported from a directory service appear in the drop-down menu.":"",
"Select the user to run the rsync task. The user selected must have permissions to write to the specified directory on the remote host.":"",
"Select the value or enter a value between <i>0</i> and <i>1023</i>. Some initiators expect a value below <i>256</i>. Leave this field blank to automatically assign the next available ID.":"",
"Select when the command or script runs:<br> <i>Pre Init</i> is early in the boot process, after mounting filesystems and starting networking.<br> <i>Post Init</i> is at the end of the boot process, before FreeNAS services start.<br> <i>Shutdown</i> is during the system power off process.":"",
"Select when the command or script runs:<br> <i>Pre Init</i> is early in the boot process, after mounting filesystems and starting networking.<br> <i>Post Init</i> is at the end of the boot process, before TrueNAS services start.<br> <i>Shutdown</i> is during the system power off process.":"",
"Select which existing initiator group has access to the target.":"",
"Select {this} to include all {these} addresses. When this has been chosen, additional addresses cannot be selected.":"",
"Selecting a dataset to use with Minio <strong>removes all existing permissions for the dataset and any nested directories!</strong> Permissions are reset to minio:minio. To avoid dataset permissions conflicts, please create a separate, dedicated dataset for Minio.":"",
"Method of snapshot transfer:<ul> <li><i>SSH</i> is supported by most systems. It requires a previously created connection in <b>System > SSH Connections</b>.</li> <li><i>SSH+NETCAT</i> uses SSH to establish a connection to the destination system, then uses <a href=\"https://github.com/truenas/py-libzfs\" target=\"_blank\">py-libzfs</a> to send an unencrypted data stream for higher transfer speeds. This only works when replicating to a FreeNAS, TrueNAS, or other system with <i>py-libzfs</i> installed.</li> <li><i>LOCAL</i> efficiently replicates snapshots to another dataset on the same system without using the network.</li> <li><i>LEGACY</i> uses the legacy replication engine from FreeNAS 11.2 and earlier.</li></ul>":"",
"Method of snapshot transfer:<ul> <li><i>SSH</i> is supported by most systems. It requires a previously created connection in <b>System > SSH Connections</b>.</li> <li><i>SSH+NETCAT</i> uses SSH to establish a connection to the destination system, then uses <a href=\"https://github.com/truenas/py-libzfs\" target=\"_blank\">py-libzfs</a> to send an unencrypted data stream for higher transfer speeds. This only works when replicating to a TrueNAS, or other system with <i>py-libzfs</i> installed.</li> <li><i>LOCAL</i> efficiently replicates snapshots to another dataset on the same system without using the network.</li> <li><i>LEGACY</i> uses the legacy replication engine from FreeNAS 11.2 and earlier.</li></ul>":"",
"Metrics":"",
"MiB":"",
"MiB. Units smaller than MiB are not allowed.":"",
...
...
@@ -2551,7 +2551,7 @@
"Privacy Passphrase":"",
"Privacy Protocol":"",
"Private Key":"",
"Privileges are the same as the guest account. Guest access is disabled by default in Windows 10 version 1709 and Windows Server version 1903. Additional client-side configuration is required to provide guest access to these clients.<br><br> <i>MacOS clients:</i> Attempting to connect as a user that does not exist in FreeNAS <i>does not</i> automatically connect as the guest account. The <b>Connect As:</b> <i>Guest</i> option must be specifically chosen in MacOS to log in as the guest account. See the <a href=\"https://support.apple.com/guide/mac-help/connect-mac-shared-computers-servers-mchlp1140/\" target=\"_blank\">Apple documentation</a> for more details.":"",
"Privileges are the same as the guest account. Guest access is disabled by default in Windows 10 version 1709 and Windows Server version 1903. Additional client-side configuration is required to provide guest access to these clients.<br><br> <i>MacOS clients:</i> Attempting to connect as a user that does not exist in TrueNAS <i>does not</i> automatically connect as the guest account. The <b>Connect As:</b> <i>Guest</i> option must be specifically chosen in MacOS to log in as the guest account. See the <a href=\"https://support.apple.com/guide/mac-help/connect-mac-shared-computers-servers-mchlp1140/\" target=\"_blank\">Apple documentation</a> for more details.":"",
"Proactive Support":"",
"Proactive support settings is not available.":"",
"Proceed":"",
...
...
@@ -3004,7 +3004,7 @@
"Select the user to control the dataset. Users created manually or imported from a directory service appear in the drop-down menu.":"",
"Select the user to run the rsync task. The user selected must have permissions to write to the specified directory on the remote host.":"",
"Select the value or enter a value between <i>0</i> and <i>1023</i>. Some initiators expect a value below <i>256</i>. Leave this field blank to automatically assign the next available ID.":"",
"Select when the command or script runs:<br> <i>Pre Init</i> is early in the boot process, after mounting filesystems and starting networking.<br> <i>Post Init</i> is at the end of the boot process, before FreeNAS services start.<br> <i>Shutdown</i> is during the system power off process.":"",
"Select when the command or script runs:<br> <i>Pre Init</i> is early in the boot process, after mounting filesystems and starting networking.<br> <i>Post Init</i> is at the end of the boot process, before TrueNAS services start.<br> <i>Shutdown</i> is during the system power off process.":"",
"Select which existing initiator group has access to the target.":"",
"Select {this} to include all {these} addresses. When this has been chosen, additional addresses cannot be selected.":"",
"Selecting a dataset to use with Minio <strong>removes all existing permissions for the dataset and any nested directories!</strong> Permissions are reset to minio:minio. To avoid dataset permissions conflicts, please create a separate, dedicated dataset for Minio.":"",
"Method of snapshot transfer:<ul> <li><i>SSH</i> is supported by most systems. It requires a previously created connection in <b>System > SSH Connections</b>.</li> <li><i>SSH+NETCAT</i> uses SSH to establish a connection to the destination system, then uses <a href=\"https://github.com/truenas/py-libzfs\" target=\"_blank\">py-libzfs</a> to send an unencrypted data stream for higher transfer speeds. This only works when replicating to a FreeNAS, TrueNAS, or other system with <i>py-libzfs</i> installed.</li> <li><i>LOCAL</i> efficiently replicates snapshots to another dataset on the same system without using the network.</li> <li><i>LEGACY</i> uses the legacy replication engine from FreeNAS 11.2 and earlier.</li></ul>":"",
"Method of snapshot transfer:<ul> <li><i>SSH</i> is supported by most systems. It requires a previously created connection in <b>System > SSH Connections</b>.</li> <li><i>SSH+NETCAT</i> uses SSH to establish a connection to the destination system, then uses <a href=\"https://github.com/truenas/py-libzfs\" target=\"_blank\">py-libzfs</a> to send an unencrypted data stream for higher transfer speeds. This only works when replicating to a TrueNAS, or other system with <i>py-libzfs</i> installed.</li> <li><i>LOCAL</i> efficiently replicates snapshots to another dataset on the same system without using the network.</li> <li><i>LEGACY</i> uses the legacy replication engine from FreeNAS 11.2 and earlier.</li></ul>":"",
"Metrics":"",
"MiB":"",
"MiB. Units smaller than MiB are not allowed.":"",
...
...
@@ -2551,7 +2551,7 @@
"Privacy Passphrase":"",
"Privacy Protocol":"",
"Private Key":"",
"Privileges are the same as the guest account. Guest access is disabled by default in Windows 10 version 1709 and Windows Server version 1903. Additional client-side configuration is required to provide guest access to these clients.<br><br> <i>MacOS clients:</i> Attempting to connect as a user that does not exist in FreeNAS <i>does not</i> automatically connect as the guest account. The <b>Connect As:</b> <i>Guest</i> option must be specifically chosen in MacOS to log in as the guest account. See the <a href=\"https://support.apple.com/guide/mac-help/connect-mac-shared-computers-servers-mchlp1140/\" target=\"_blank\">Apple documentation</a> for more details.":"",
"Privileges are the same as the guest account. Guest access is disabled by default in Windows 10 version 1709 and Windows Server version 1903. Additional client-side configuration is required to provide guest access to these clients.<br><br> <i>MacOS clients:</i> Attempting to connect as a user that does not exist in TrueNAS <i>does not</i> automatically connect as the guest account. The <b>Connect As:</b> <i>Guest</i> option must be specifically chosen in MacOS to log in as the guest account. See the <a href=\"https://support.apple.com/guide/mac-help/connect-mac-shared-computers-servers-mchlp1140/\" target=\"_blank\">Apple documentation</a> for more details.":"",
"Proactive Support":"",
"Proactive support settings is not available.":"",
"Proceed":"",
...
...
@@ -3004,7 +3004,7 @@
"Select the user to control the dataset. Users created manually or imported from a directory service appear in the drop-down menu.":"",
"Select the user to run the rsync task. The user selected must have permissions to write to the specified directory on the remote host.":"",
"Select the value or enter a value between <i>0</i> and <i>1023</i>. Some initiators expect a value below <i>256</i>. Leave this field blank to automatically assign the next available ID.":"",
"Select when the command or script runs:<br> <i>Pre Init</i> is early in the boot process, after mounting filesystems and starting networking.<br> <i>Post Init</i> is at the end of the boot process, before FreeNAS services start.<br> <i>Shutdown</i> is during the system power off process.":"",
"Select when the command or script runs:<br> <i>Pre Init</i> is early in the boot process, after mounting filesystems and starting networking.<br> <i>Post Init</i> is at the end of the boot process, before TrueNAS services start.<br> <i>Shutdown</i> is during the system power off process.":"",
"Select which existing initiator group has access to the target.":"",
"Select {this} to include all {these} addresses. When this has been chosen, additional addresses cannot be selected.":"",
"Selecting a dataset to use with Minio <strong>removes all existing permissions for the dataset and any nested directories!</strong> Permissions are reset to minio:minio. To avoid dataset permissions conflicts, please create a separate, dedicated dataset for Minio.":"",
"Method of snapshot transfer:<ul> <li><i>SSH</i> is supported by most systems. It requires a previously created connection in <b>System > SSH Connections</b>.</li> <li><i>SSH+NETCAT</i> uses SSH to establish a connection to the destination system, then uses <a href=\"https://github.com/truenas/py-libzfs\" target=\"_blank\">py-libzfs</a> to send an unencrypted data stream for higher transfer speeds. This only works when replicating to a FreeNAS, TrueNAS, or other system with <i>py-libzfs</i> installed.</li> <li><i>LOCAL</i> efficiently replicates snapshots to another dataset on the same system without using the network.</li> <li><i>LEGACY</i> uses the legacy replication engine from FreeNAS 11.2 and earlier.</li></ul>":"",
"Method of snapshot transfer:<ul> <li><i>SSH</i> is supported by most systems. It requires a previously created connection in <b>System > SSH Connections</b>.</li> <li><i>SSH+NETCAT</i> uses SSH to establish a connection to the destination system, then uses <a href=\"https://github.com/truenas/py-libzfs\" target=\"_blank\">py-libzfs</a> to send an unencrypted data stream for higher transfer speeds. This only works when replicating to a TrueNAS, or other system with <i>py-libzfs</i> installed.</li> <li><i>LOCAL</i> efficiently replicates snapshots to another dataset on the same system without using the network.</li> <li><i>LEGACY</i> uses the legacy replication engine from FreeNAS 11.2 and earlier.</li></ul>":"",
"Metrics":"",
"MiB":"",
"MiB. Units smaller than MiB are not allowed.":"",
...
...
@@ -2551,7 +2551,7 @@
"Privacy Passphrase":"",
"Privacy Protocol":"",
"Private Key":"",
"Privileges are the same as the guest account. Guest access is disabled by default in Windows 10 version 1709 and Windows Server version 1903. Additional client-side configuration is required to provide guest access to these clients.<br><br> <i>MacOS clients:</i> Attempting to connect as a user that does not exist in FreeNAS <i>does not</i> automatically connect as the guest account. The <b>Connect As:</b> <i>Guest</i> option must be specifically chosen in MacOS to log in as the guest account. See the <a href=\"https://support.apple.com/guide/mac-help/connect-mac-shared-computers-servers-mchlp1140/\" target=\"_blank\">Apple documentation</a> for more details.":"",
"Privileges are the same as the guest account. Guest access is disabled by default in Windows 10 version 1709 and Windows Server version 1903. Additional client-side configuration is required to provide guest access to these clients.<br><br> <i>MacOS clients:</i> Attempting to connect as a user that does not exist in TrueNAS <i>does not</i> automatically connect as the guest account. The <b>Connect As:</b> <i>Guest</i> option must be specifically chosen in MacOS to log in as the guest account. See the <a href=\"https://support.apple.com/guide/mac-help/connect-mac-shared-computers-servers-mchlp1140/\" target=\"_blank\">Apple documentation</a> for more details.":"",
"Proactive Support":"",
"Proactive support settings is not available.":"",
"Proceed":"",
...
...
@@ -3004,7 +3004,7 @@
"Select the user to control the dataset. Users created manually or imported from a directory service appear in the drop-down menu.":"",
"Select the user to run the rsync task. The user selected must have permissions to write to the specified directory on the remote host.":"",
"Select the value or enter a value between <i>0</i> and <i>1023</i>. Some initiators expect a value below <i>256</i>. Leave this field blank to automatically assign the next available ID.":"",
"Select when the command or script runs:<br> <i>Pre Init</i> is early in the boot process, after mounting filesystems and starting networking.<br> <i>Post Init</i> is at the end of the boot process, before FreeNAS services start.<br> <i>Shutdown</i> is during the system power off process.":"",
"Select when the command or script runs:<br> <i>Pre Init</i> is early in the boot process, after mounting filesystems and starting networking.<br> <i>Post Init</i> is at the end of the boot process, before TrueNAS services start.<br> <i>Shutdown</i> is during the system power off process.":"",
"Select which existing initiator group has access to the target.":"",
"Select {this} to include all {these} addresses. When this has been chosen, additional addresses cannot be selected.":"",
"Selecting a dataset to use with Minio <strong>removes all existing permissions for the dataset and any nested directories!</strong> Permissions are reset to minio:minio. To avoid dataset permissions conflicts, please create a separate, dedicated dataset for Minio.":"",
"Method of snapshot transfer:<ul> <li><i>SSH</i> is supported by most systems. It requires a previously created connection in <b>System > SSH Connections</b>.</li> <li><i>SSH+NETCAT</i> uses SSH to establish a connection to the destination system, then uses <a href=\"https://github.com/truenas/py-libzfs\" target=\"_blank\">py-libzfs</a> to send an unencrypted data stream for higher transfer speeds. This only works when replicating to a FreeNAS, TrueNAS, or other system with <i>py-libzfs</i> installed.</li> <li><i>LOCAL</i> efficiently replicates snapshots to another dataset on the same system without using the network.</li> <li><i>LEGACY</i> uses the legacy replication engine from FreeNAS 11.2 and earlier.</li></ul>":"",
"Method of snapshot transfer:<ul> <li><i>SSH</i> is supported by most systems. It requires a previously created connection in <b>System > SSH Connections</b>.</li> <li><i>SSH+NETCAT</i> uses SSH to establish a connection to the destination system, then uses <a href=\"https://github.com/truenas/py-libzfs\" target=\"_blank\">py-libzfs</a> to send an unencrypted data stream for higher transfer speeds. This only works when replicating to a TrueNAS, or other system with <i>py-libzfs</i> installed.</li> <li><i>LOCAL</i> efficiently replicates snapshots to another dataset on the same system without using the network.</li> <li><i>LEGACY</i> uses the legacy replication engine from FreeNAS 11.2 and earlier.</li></ul>":"",
"Metrics":"",
"MiB":"",
"MiB. Units smaller than MiB are not allowed.":"",
...
...
@@ -2551,7 +2551,7 @@
"Privacy Passphrase":"",
"Privacy Protocol":"",
"Private Key":"",
"Privileges are the same as the guest account. Guest access is disabled by default in Windows 10 version 1709 and Windows Server version 1903. Additional client-side configuration is required to provide guest access to these clients.<br><br> <i>MacOS clients:</i> Attempting to connect as a user that does not exist in FreeNAS <i>does not</i> automatically connect as the guest account. The <b>Connect As:</b> <i>Guest</i> option must be specifically chosen in MacOS to log in as the guest account. See the <a href=\"https://support.apple.com/guide/mac-help/connect-mac-shared-computers-servers-mchlp1140/\" target=\"_blank\">Apple documentation</a> for more details.":"",
"Privileges are the same as the guest account. Guest access is disabled by default in Windows 10 version 1709 and Windows Server version 1903. Additional client-side configuration is required to provide guest access to these clients.<br><br> <i>MacOS clients:</i> Attempting to connect as a user that does not exist in TrueNAS <i>does not</i> automatically connect as the guest account. The <b>Connect As:</b> <i>Guest</i> option must be specifically chosen in MacOS to log in as the guest account. See the <a href=\"https://support.apple.com/guide/mac-help/connect-mac-shared-computers-servers-mchlp1140/\" target=\"_blank\">Apple documentation</a> for more details.":"",
"Proactive Support":"",
"Proactive support settings is not available.":"",
"Proceed":"",
...
...
@@ -3004,7 +3004,7 @@
"Select the user to control the dataset. Users created manually or imported from a directory service appear in the drop-down menu.":"",
"Select the user to run the rsync task. The user selected must have permissions to write to the specified directory on the remote host.":"",
"Select the value or enter a value between <i>0</i> and <i>1023</i>. Some initiators expect a value below <i>256</i>. Leave this field blank to automatically assign the next available ID.":"",
"Select when the command or script runs:<br> <i>Pre Init</i> is early in the boot process, after mounting filesystems and starting networking.<br> <i>Post Init</i> is at the end of the boot process, before FreeNAS services start.<br> <i>Shutdown</i> is during the system power off process.":"",
"Select when the command or script runs:<br> <i>Pre Init</i> is early in the boot process, after mounting filesystems and starting networking.<br> <i>Post Init</i> is at the end of the boot process, before TrueNAS services start.<br> <i>Shutdown</i> is during the system power off process.":"",
"Select which existing initiator group has access to the target.":"",
"Select {this} to include all {these} addresses. When this has been chosen, additional addresses cannot be selected.":"",
"Selecting a dataset to use with Minio <strong>removes all existing permissions for the dataset and any nested directories!</strong> Permissions are reset to minio:minio. To avoid dataset permissions conflicts, please create a separate, dedicated dataset for Minio.":"",
"Method of snapshot transfer:<ul> <li><i>SSH</i> is supported by most systems. It requires a previously created connection in <b>System > SSH Connections</b>.</li> <li><i>SSH+NETCAT</i> uses SSH to establish a connection to the destination system, then uses <a href=\"https://github.com/truenas/py-libzfs\" target=\"_blank\">py-libzfs</a> to send an unencrypted data stream for higher transfer speeds. This only works when replicating to a FreeNAS, TrueNAS, or other system with <i>py-libzfs</i> installed.</li> <li><i>LOCAL</i> efficiently replicates snapshots to another dataset on the same system without using the network.</li> <li><i>LEGACY</i> uses the legacy replication engine from FreeNAS 11.2 and earlier.</li></ul>":"",
"Method of snapshot transfer:<ul> <li><i>SSH</i> is supported by most systems. It requires a previously created connection in <b>System > SSH Connections</b>.</li> <li><i>SSH+NETCAT</i> uses SSH to establish a connection to the destination system, then uses <a href=\"https://github.com/truenas/py-libzfs\" target=\"_blank\">py-libzfs</a> to send an unencrypted data stream for higher transfer speeds. This only works when replicating to a TrueNAS, or other system with <i>py-libzfs</i> installed.</li> <li><i>LOCAL</i> efficiently replicates snapshots to another dataset on the same system without using the network.</li> <li><i>LEGACY</i> uses the legacy replication engine from FreeNAS 11.2 and earlier.</li></ul>":"",
"Metrics":"",
"MiB":"",
"MiB. Units smaller than MiB are not allowed.":"",
...
...
@@ -2551,7 +2551,7 @@
"Privacy Passphrase":"",
"Privacy Protocol":"",
"Private Key":"",
"Privileges are the same as the guest account. Guest access is disabled by default in Windows 10 version 1709 and Windows Server version 1903. Additional client-side configuration is required to provide guest access to these clients.<br><br> <i>MacOS clients:</i> Attempting to connect as a user that does not exist in FreeNAS <i>does not</i> automatically connect as the guest account. The <b>Connect As:</b> <i>Guest</i> option must be specifically chosen in MacOS to log in as the guest account. See the <a href=\"https://support.apple.com/guide/mac-help/connect-mac-shared-computers-servers-mchlp1140/\" target=\"_blank\">Apple documentation</a> for more details.":"",
"Privileges are the same as the guest account. Guest access is disabled by default in Windows 10 version 1709 and Windows Server version 1903. Additional client-side configuration is required to provide guest access to these clients.<br><br> <i>MacOS clients:</i> Attempting to connect as a user that does not exist in TrueNAS <i>does not</i> automatically connect as the guest account. The <b>Connect As:</b> <i>Guest</i> option must be specifically chosen in MacOS to log in as the guest account. See the <a href=\"https://support.apple.com/guide/mac-help/connect-mac-shared-computers-servers-mchlp1140/\" target=\"_blank\">Apple documentation</a> for more details.":"",
"Proactive Support":"",
"Proactive support settings is not available.":"",
"Proceed":"",
...
...
@@ -3004,7 +3004,7 @@
"Select the user to control the dataset. Users created manually or imported from a directory service appear in the drop-down menu.":"",
"Select the user to run the rsync task. The user selected must have permissions to write to the specified directory on the remote host.":"",
"Select the value or enter a value between <i>0</i> and <i>1023</i>. Some initiators expect a value below <i>256</i>. Leave this field blank to automatically assign the next available ID.":"",
"Select when the command or script runs:<br> <i>Pre Init</i> is early in the boot process, after mounting filesystems and starting networking.<br> <i>Post Init</i> is at the end of the boot process, before FreeNAS services start.<br> <i>Shutdown</i> is during the system power off process.":"",
"Select when the command or script runs:<br> <i>Pre Init</i> is early in the boot process, after mounting filesystems and starting networking.<br> <i>Post Init</i> is at the end of the boot process, before TrueNAS services start.<br> <i>Shutdown</i> is during the system power off process.":"",
"Select which existing initiator group has access to the target.":"",
"Select {this} to include all {these} addresses. When this has been chosen, additional addresses cannot be selected.":"",
"Selecting a dataset to use with Minio <strong>removes all existing permissions for the dataset and any nested directories!</strong> Permissions are reset to minio:minio. To avoid dataset permissions conflicts, please create a separate, dedicated dataset for Minio.":"",
"Method of snapshot transfer:<ul> <li><i>SSH</i> is supported by most systems. It requires a previously created connection in <b>System > SSH Connections</b>.</li> <li><i>SSH+NETCAT</i> uses SSH to establish a connection to the destination system, then uses <a href=\"https://github.com/truenas/py-libzfs\" target=\"_blank\">py-libzfs</a> to send an unencrypted data stream for higher transfer speeds. This only works when replicating to a FreeNAS, TrueNAS, or other system with <i>py-libzfs</i> installed.</li> <li><i>LOCAL</i> efficiently replicates snapshots to another dataset on the same system without using the network.</li> <li><i>LEGACY</i> uses the legacy replication engine from FreeNAS 11.2 and earlier.</li></ul>":"",
"Method of snapshot transfer:<ul> <li><i>SSH</i> is supported by most systems. It requires a previously created connection in <b>System > SSH Connections</b>.</li> <li><i>SSH+NETCAT</i> uses SSH to establish a connection to the destination system, then uses <a href=\"https://github.com/truenas/py-libzfs\" target=\"_blank\">py-libzfs</a> to send an unencrypted data stream for higher transfer speeds. This only works when replicating to a TrueNAS, or other system with <i>py-libzfs</i> installed.</li> <li><i>LOCAL</i> efficiently replicates snapshots to another dataset on the same system without using the network.</li> <li><i>LEGACY</i> uses the legacy replication engine from FreeNAS 11.2 and earlier.</li></ul>":"",
"Metrics":"",
"MiB":"",
"MiB. Units smaller than MiB are not allowed.":"",
...
...
@@ -2551,7 +2551,7 @@
"Privacy Passphrase":"",
"Privacy Protocol":"",
"Private Key":"",
"Privileges are the same as the guest account. Guest access is disabled by default in Windows 10 version 1709 and Windows Server version 1903. Additional client-side configuration is required to provide guest access to these clients.<br><br> <i>MacOS clients:</i> Attempting to connect as a user that does not exist in FreeNAS <i>does not</i> automatically connect as the guest account. The <b>Connect As:</b> <i>Guest</i> option must be specifically chosen in MacOS to log in as the guest account. See the <a href=\"https://support.apple.com/guide/mac-help/connect-mac-shared-computers-servers-mchlp1140/\" target=\"_blank\">Apple documentation</a> for more details.":"",
"Privileges are the same as the guest account. Guest access is disabled by default in Windows 10 version 1709 and Windows Server version 1903. Additional client-side configuration is required to provide guest access to these clients.<br><br> <i>MacOS clients:</i> Attempting to connect as a user that does not exist in TrueNAS <i>does not</i> automatically connect as the guest account. The <b>Connect As:</b> <i>Guest</i> option must be specifically chosen in MacOS to log in as the guest account. See the <a href=\"https://support.apple.com/guide/mac-help/connect-mac-shared-computers-servers-mchlp1140/\" target=\"_blank\">Apple documentation</a> for more details.":"",
"Proactive Support":"",
"Proactive support settings is not available.":"",
"Proceed":"",
...
...
@@ -3004,7 +3004,7 @@
"Select the user to control the dataset. Users created manually or imported from a directory service appear in the drop-down menu.":"",
"Select the user to run the rsync task. The user selected must have permissions to write to the specified directory on the remote host.":"",
"Select the value or enter a value between <i>0</i> and <i>1023</i>. Some initiators expect a value below <i>256</i>. Leave this field blank to automatically assign the next available ID.":"",
"Select when the command or script runs:<br> <i>Pre Init</i> is early in the boot process, after mounting filesystems and starting networking.<br> <i>Post Init</i> is at the end of the boot process, before FreeNAS services start.<br> <i>Shutdown</i> is during the system power off process.":"",
"Select when the command or script runs:<br> <i>Pre Init</i> is early in the boot process, after mounting filesystems and starting networking.<br> <i>Post Init</i> is at the end of the boot process, before TrueNAS services start.<br> <i>Shutdown</i> is during the system power off process.":"",
"Select which existing initiator group has access to the target.":"",
"Select {this} to include all {these} addresses. When this has been chosen, additional addresses cannot be selected.":"",
"Selecting a dataset to use with Minio <strong>removes all existing permissions for the dataset and any nested directories!</strong> Permissions are reset to minio:minio. To avoid dataset permissions conflicts, please create a separate, dedicated dataset for Minio.":"",
"Method of snapshot transfer:<ul> <li><i>SSH</i> is supported by most systems. It requires a previously created connection in <b>System > SSH Connections</b>.</li> <li><i>SSH+NETCAT</i> uses SSH to establish a connection to the destination system, then uses <a href=\"https://github.com/truenas/py-libzfs\" target=\"_blank\">py-libzfs</a> to send an unencrypted data stream for higher transfer speeds. This only works when replicating to a FreeNAS, TrueNAS, or other system with <i>py-libzfs</i> installed.</li> <li><i>LOCAL</i> efficiently replicates snapshots to another dataset on the same system without using the network.</li> <li><i>LEGACY</i> uses the legacy replication engine from FreeNAS 11.2 and earlier.</li></ul>":"",
"Method of snapshot transfer:<ul> <li><i>SSH</i> is supported by most systems. It requires a previously created connection in <b>System > SSH Connections</b>.</li> <li><i>SSH+NETCAT</i> uses SSH to establish a connection to the destination system, then uses <a href=\"https://github.com/truenas/py-libzfs\" target=\"_blank\">py-libzfs</a> to send an unencrypted data stream for higher transfer speeds. This only works when replicating to a TrueNAS, or other system with <i>py-libzfs</i> installed.</li> <li><i>LOCAL</i> efficiently replicates snapshots to another dataset on the same system without using the network.</li> <li><i>LEGACY</i> uses the legacy replication engine from FreeNAS 11.2 and earlier.</li></ul>":"",
"Metrics":"",
"MiB":"",
"MiB. Units smaller than MiB are not allowed.":"",
...
...
@@ -2551,7 +2551,7 @@
"Privacy Passphrase":"",
"Privacy Protocol":"",
"Private Key":"",
"Privileges are the same as the guest account. Guest access is disabled by default in Windows 10 version 1709 and Windows Server version 1903. Additional client-side configuration is required to provide guest access to these clients.<br><br> <i>MacOS clients:</i> Attempting to connect as a user that does not exist in FreeNAS <i>does not</i> automatically connect as the guest account. The <b>Connect As:</b> <i>Guest</i> option must be specifically chosen in MacOS to log in as the guest account. See the <a href=\"https://support.apple.com/guide/mac-help/connect-mac-shared-computers-servers-mchlp1140/\" target=\"_blank\">Apple documentation</a> for more details.":"",
"Privileges are the same as the guest account. Guest access is disabled by default in Windows 10 version 1709 and Windows Server version 1903. Additional client-side configuration is required to provide guest access to these clients.<br><br> <i>MacOS clients:</i> Attempting to connect as a user that does not exist in TrueNAS <i>does not</i> automatically connect as the guest account. The <b>Connect As:</b> <i>Guest</i> option must be specifically chosen in MacOS to log in as the guest account. See the <a href=\"https://support.apple.com/guide/mac-help/connect-mac-shared-computers-servers-mchlp1140/\" target=\"_blank\">Apple documentation</a> for more details.":"",
"Proactive Support":"",
"Proactive support settings is not available.":"",
"Proceed":"",
...
...
@@ -3004,7 +3004,7 @@
"Select the user to control the dataset. Users created manually or imported from a directory service appear in the drop-down menu.":"",
"Select the user to run the rsync task. The user selected must have permissions to write to the specified directory on the remote host.":"",
"Select the value or enter a value between <i>0</i> and <i>1023</i>. Some initiators expect a value below <i>256</i>. Leave this field blank to automatically assign the next available ID.":"",
"Select when the command or script runs:<br> <i>Pre Init</i> is early in the boot process, after mounting filesystems and starting networking.<br> <i>Post Init</i> is at the end of the boot process, before FreeNAS services start.<br> <i>Shutdown</i> is during the system power off process.":"",
"Select when the command or script runs:<br> <i>Pre Init</i> is early in the boot process, after mounting filesystems and starting networking.<br> <i>Post Init</i> is at the end of the boot process, before TrueNAS services start.<br> <i>Shutdown</i> is during the system power off process.":"",
"Select which existing initiator group has access to the target.":"",
"Select {this} to include all {these} addresses. When this has been chosen, additional addresses cannot be selected.":"",
"Selecting a dataset to use with Minio <strong>removes all existing permissions for the dataset and any nested directories!</strong> Permissions are reset to minio:minio. To avoid dataset permissions conflicts, please create a separate, dedicated dataset for Minio.":"",
"Method of snapshot transfer:<ul> <li><i>SSH</i> is supported by most systems. It requires a previously created connection in <b>System > SSH Connections</b>.</li> <li><i>SSH+NETCAT</i> uses SSH to establish a connection to the destination system, then uses <a href=\"https://github.com/truenas/py-libzfs\" target=\"_blank\">py-libzfs</a> to send an unencrypted data stream for higher transfer speeds. This only works when replicating to a FreeNAS, TrueNAS, or other system with <i>py-libzfs</i> installed.</li> <li><i>LOCAL</i> efficiently replicates snapshots to another dataset on the same system without using the network.</li> <li><i>LEGACY</i> uses the legacy replication engine from FreeNAS 11.2 and earlier.</li></ul>":"",
"Method of snapshot transfer:<ul> <li><i>SSH</i> is supported by most systems. It requires a previously created connection in <b>System > SSH Connections</b>.</li> <li><i>SSH+NETCAT</i> uses SSH to establish a connection to the destination system, then uses <a href=\"https://github.com/truenas/py-libzfs\" target=\"_blank\">py-libzfs</a> to send an unencrypted data stream for higher transfer speeds. This only works when replicating to a TrueNAS, or other system with <i>py-libzfs</i> installed.</li> <li><i>LOCAL</i> efficiently replicates snapshots to another dataset on the same system without using the network.</li> <li><i>LEGACY</i> uses the legacy replication engine from FreeNAS 11.2 and earlier.</li></ul>":"",
"Metrics":"",
"MiB":"",
"MiB. Units smaller than MiB are not allowed.":"",
...
...
@@ -2551,7 +2551,7 @@
"Privacy Passphrase":"",
"Privacy Protocol":"",
"Private Key":"",
"Privileges are the same as the guest account. Guest access is disabled by default in Windows 10 version 1709 and Windows Server version 1903. Additional client-side configuration is required to provide guest access to these clients.<br><br> <i>MacOS clients:</i> Attempting to connect as a user that does not exist in FreeNAS <i>does not</i> automatically connect as the guest account. The <b>Connect As:</b> <i>Guest</i> option must be specifically chosen in MacOS to log in as the guest account. See the <a href=\"https://support.apple.com/guide/mac-help/connect-mac-shared-computers-servers-mchlp1140/\" target=\"_blank\">Apple documentation</a> for more details.":"",
"Privileges are the same as the guest account. Guest access is disabled by default in Windows 10 version 1709 and Windows Server version 1903. Additional client-side configuration is required to provide guest access to these clients.<br><br> <i>MacOS clients:</i> Attempting to connect as a user that does not exist in TrueNAS <i>does not</i> automatically connect as the guest account. The <b>Connect As:</b> <i>Guest</i> option must be specifically chosen in MacOS to log in as the guest account. See the <a href=\"https://support.apple.com/guide/mac-help/connect-mac-shared-computers-servers-mchlp1140/\" target=\"_blank\">Apple documentation</a> for more details.":"",
"Proactive Support":"",
"Proactive support settings is not available.":"",
"Proceed":"",
...
...
@@ -3004,7 +3004,7 @@
"Select the user to control the dataset. Users created manually or imported from a directory service appear in the drop-down menu.":"",
"Select the user to run the rsync task. The user selected must have permissions to write to the specified directory on the remote host.":"",
"Select the value or enter a value between <i>0</i> and <i>1023</i>. Some initiators expect a value below <i>256</i>. Leave this field blank to automatically assign the next available ID.":"",
"Select when the command or script runs:<br> <i>Pre Init</i> is early in the boot process, after mounting filesystems and starting networking.<br> <i>Post Init</i> is at the end of the boot process, before FreeNAS services start.<br> <i>Shutdown</i> is during the system power off process.":"",
"Select when the command or script runs:<br> <i>Pre Init</i> is early in the boot process, after mounting filesystems and starting networking.<br> <i>Post Init</i> is at the end of the boot process, before TrueNAS services start.<br> <i>Shutdown</i> is during the system power off process.":"",
"Select which existing initiator group has access to the target.":"",
"Select {this} to include all {these} addresses. When this has been chosen, additional addresses cannot be selected.":"",
"Selecting a dataset to use with Minio <strong>removes all existing permissions for the dataset and any nested directories!</strong> Permissions are reset to minio:minio. To avoid dataset permissions conflicts, please create a separate, dedicated dataset for Minio.":"",
"Method of snapshot transfer:<ul> <li><i>SSH</i> is supported by most systems. It requires a previously created connection in <b>System > SSH Connections</b>.</li> <li><i>SSH+NETCAT</i> uses SSH to establish a connection to the destination system, then uses <a href=\"https://github.com/truenas/py-libzfs\" target=\"_blank\">py-libzfs</a> to send an unencrypted data stream for higher transfer speeds. This only works when replicating to a FreeNAS, TrueNAS, or other system with <i>py-libzfs</i> installed.</li> <li><i>LOCAL</i> efficiently replicates snapshots to another dataset on the same system without using the network.</li> <li><i>LEGACY</i> uses the legacy replication engine from FreeNAS 11.2 and earlier.</li></ul>":"",
"Method of snapshot transfer:<ul> <li><i>SSH</i> is supported by most systems. It requires a previously created connection in <b>System > SSH Connections</b>.</li> <li><i>SSH+NETCAT</i> uses SSH to establish a connection to the destination system, then uses <a href=\"https://github.com/truenas/py-libzfs\" target=\"_blank\">py-libzfs</a> to send an unencrypted data stream for higher transfer speeds. This only works when replicating to a TrueNAS, or other system with <i>py-libzfs</i> installed.</li> <li><i>LOCAL</i> efficiently replicates snapshots to another dataset on the same system without using the network.</li> <li><i>LEGACY</i> uses the legacy replication engine from FreeNAS 11.2 and earlier.</li></ul>":"",
"Metrics":"",
"MiB":"",
"MiB. Units smaller than MiB are not allowed.":"",
...
...
@@ -2160,7 +2160,7 @@
"Priority Code Point":"",
"Privacy Passphrase":"",
"Privacy Protocol":"",
"Privileges are the same as the guest account. Guest access is disabled by default in Windows 10 version 1709 and Windows Server version 1903. Additional client-side configuration is required to provide guest access to these clients.<br><br> <i>MacOS clients:</i> Attempting to connect as a user that does not exist in FreeNAS <i>does not</i> automatically connect as the guest account. The <b>Connect As:</b> <i>Guest</i> option must be specifically chosen in MacOS to log in as the guest account. See the <a href=\"https://support.apple.com/guide/mac-help/connect-mac-shared-computers-servers-mchlp1140/\" target=\"_blank\">Apple documentation</a> for more details.":"",
"Privileges are the same as the guest account. Guest access is disabled by default in Windows 10 version 1709 and Windows Server version 1903. Additional client-side configuration is required to provide guest access to these clients.<br><br> <i>MacOS clients:</i> Attempting to connect as a user that does not exist in TrueNAS <i>does not</i> automatically connect as the guest account. The <b>Connect As:</b> <i>Guest</i> option must be specifically chosen in MacOS to log in as the guest account. See the <a href=\"https://support.apple.com/guide/mac-help/connect-mac-shared-computers-servers-mchlp1140/\" target=\"_blank\">Apple documentation</a> for more details.":"",
"Proactive support settings is not available.":"",
"Proceed with Update":"",
"Proceed with upgrading the pool? WARNING: Upgrading a pool is a one-way operation that might make some features of the pool incompatible with older versions of TrueNAS: ":"",
...
...
@@ -2553,7 +2553,7 @@
"Select the user to control the dataset. Users created manually or imported from a directory service appear in the drop-down menu.":"",
"Select the user to run the rsync task. The user selected must have permissions to write to the specified directory on the remote host.":"",
"Select the value or enter a value between <i>0</i> and <i>1023</i>. Some initiators expect a value below <i>256</i>. Leave this field blank to automatically assign the next available ID.":"",
"Select when the command or script runs:<br> <i>Pre Init</i> is early in the boot process, after mounting filesystems and starting networking.<br> <i>Post Init</i> is at the end of the boot process, before FreeNAS services start.<br> <i>Shutdown</i> is during the system power off process.":"",
"Select when the command or script runs:<br> <i>Pre Init</i> is early in the boot process, after mounting filesystems and starting networking.<br> <i>Post Init</i> is at the end of the boot process, before TrueNAS services start.<br> <i>Shutdown</i> is during the system power off process.":"",
"Select which existing initiator group has access to the target.":"",
"Select {this} to include all {these} addresses. When this has been chosen, additional addresses cannot be selected.":"",
"Selecting a dataset to use with Minio <strong>removes all existing permissions for the dataset and any nested directories!</strong> Permissions are reset to minio:minio. To avoid dataset permissions conflicts, please create a separate, dedicated dataset for Minio.":"",
"Method of snapshot transfer:<ul> <li><i>SSH</i> is supported by most systems. It requires a previously created connection in <b>System > SSH Connections</b>.</li> <li><i>SSH+NETCAT</i> uses SSH to establish a connection to the destination system, then uses <a href=\"https://github.com/truenas/py-libzfs\" target=\"_blank\">py-libzfs</a> to send an unencrypted data stream for higher transfer speeds. This only works when replicating to a FreeNAS, TrueNAS, or other system with <i>py-libzfs</i> installed.</li> <li><i>LOCAL</i> efficiently replicates snapshots to another dataset on the same system without using the network.</li> <li><i>LEGACY</i> uses the legacy replication engine from FreeNAS 11.2 and earlier.</li></ul>":"",
"Method of snapshot transfer:<ul> <li><i>SSH</i> is supported by most systems. It requires a previously created connection in <b>System > SSH Connections</b>.</li> <li><i>SSH+NETCAT</i> uses SSH to establish a connection to the destination system, then uses <a href=\"https://github.com/truenas/py-libzfs\" target=\"_blank\">py-libzfs</a> to send an unencrypted data stream for higher transfer speeds. This only works when replicating to a TrueNAS, or other system with <i>py-libzfs</i> installed.</li> <li><i>LOCAL</i> efficiently replicates snapshots to another dataset on the same system without using the network.</li> <li><i>LEGACY</i> uses the legacy replication engine from FreeNAS 11.2 and earlier.</li></ul>":"",
"Metrics":"",
"MiB":"",
"MiB. Units smaller than MiB are not allowed.":"",
...
...
@@ -2551,7 +2551,7 @@
"Privacy Passphrase":"",
"Privacy Protocol":"",
"Private Key":"",
"Privileges are the same as the guest account. Guest access is disabled by default in Windows 10 version 1709 and Windows Server version 1903. Additional client-side configuration is required to provide guest access to these clients.<br><br> <i>MacOS clients:</i> Attempting to connect as a user that does not exist in FreeNAS <i>does not</i> automatically connect as the guest account. The <b>Connect As:</b> <i>Guest</i> option must be specifically chosen in MacOS to log in as the guest account. See the <a href=\"https://support.apple.com/guide/mac-help/connect-mac-shared-computers-servers-mchlp1140/\" target=\"_blank\">Apple documentation</a> for more details.":"",
"Privileges are the same as the guest account. Guest access is disabled by default in Windows 10 version 1709 and Windows Server version 1903. Additional client-side configuration is required to provide guest access to these clients.<br><br> <i>MacOS clients:</i> Attempting to connect as a user that does not exist in TrueNAS <i>does not</i> automatically connect as the guest account. The <b>Connect As:</b> <i>Guest</i> option must be specifically chosen in MacOS to log in as the guest account. See the <a href=\"https://support.apple.com/guide/mac-help/connect-mac-shared-computers-servers-mchlp1140/\" target=\"_blank\">Apple documentation</a> for more details.":"",
"Proactive Support":"",
"Proactive support settings is not available.":"",
"Proceed":"",
...
...
@@ -3004,7 +3004,7 @@
"Select the user to control the dataset. Users created manually or imported from a directory service appear in the drop-down menu.":"",
"Select the user to run the rsync task. The user selected must have permissions to write to the specified directory on the remote host.":"",
"Select the value or enter a value between <i>0</i> and <i>1023</i>. Some initiators expect a value below <i>256</i>. Leave this field blank to automatically assign the next available ID.":"",
"Select when the command or script runs:<br> <i>Pre Init</i> is early in the boot process, after mounting filesystems and starting networking.<br> <i>Post Init</i> is at the end of the boot process, before FreeNAS services start.<br> <i>Shutdown</i> is during the system power off process.":"",
"Select when the command or script runs:<br> <i>Pre Init</i> is early in the boot process, after mounting filesystems and starting networking.<br> <i>Post Init</i> is at the end of the boot process, before TrueNAS services start.<br> <i>Shutdown</i> is during the system power off process.":"",
"Select which existing initiator group has access to the target.":"",
"Select {this} to include all {these} addresses. When this has been chosen, additional addresses cannot be selected.":"",
"Selecting a dataset to use with Minio <strong>removes all existing permissions for the dataset and any nested directories!</strong> Permissions are reset to minio:minio. To avoid dataset permissions conflicts, please create a separate, dedicated dataset for Minio.":"",
"Method of snapshot transfer:<ul> <li><i>SSH</i> is supported by most systems. It requires a previously created connection in <b>System > SSH Connections</b>.</li> <li><i>SSH+NETCAT</i> uses SSH to establish a connection to the destination system, then uses <a href=\"https://github.com/truenas/py-libzfs\" target=\"_blank\">py-libzfs</a> to send an unencrypted data stream for higher transfer speeds. This only works when replicating to a FreeNAS, TrueNAS, or other system with <i>py-libzfs</i> installed.</li> <li><i>LOCAL</i> efficiently replicates snapshots to another dataset on the same system without using the network.</li> <li><i>LEGACY</i> uses the legacy replication engine from FreeNAS 11.2 and earlier.</li></ul>":"",
"Method of snapshot transfer:<ul> <li><i>SSH</i> is supported by most systems. It requires a previously created connection in <b>System > SSH Connections</b>.</li> <li><i>SSH+NETCAT</i> uses SSH to establish a connection to the destination system, then uses <a href=\"https://github.com/truenas/py-libzfs\" target=\"_blank\">py-libzfs</a> to send an unencrypted data stream for higher transfer speeds. This only works when replicating to a TrueNAS, or other system with <i>py-libzfs</i> installed.</li> <li><i>LOCAL</i> efficiently replicates snapshots to another dataset on the same system without using the network.</li> <li><i>LEGACY</i> uses the legacy replication engine from FreeNAS 11.2 and earlier.</li></ul>":"",
"Metrics":"",
"MiB":"",
"MiB. Units smaller than MiB are not allowed.":"",
...
...
@@ -2551,7 +2551,7 @@
"Privacy Passphrase":"",
"Privacy Protocol":"",
"Private Key":"",
"Privileges are the same as the guest account. Guest access is disabled by default in Windows 10 version 1709 and Windows Server version 1903. Additional client-side configuration is required to provide guest access to these clients.<br><br> <i>MacOS clients:</i> Attempting to connect as a user that does not exist in FreeNAS <i>does not</i> automatically connect as the guest account. The <b>Connect As:</b> <i>Guest</i> option must be specifically chosen in MacOS to log in as the guest account. See the <a href=\"https://support.apple.com/guide/mac-help/connect-mac-shared-computers-servers-mchlp1140/\" target=\"_blank\">Apple documentation</a> for more details.":"",
"Privileges are the same as the guest account. Guest access is disabled by default in Windows 10 version 1709 and Windows Server version 1903. Additional client-side configuration is required to provide guest access to these clients.<br><br> <i>MacOS clients:</i> Attempting to connect as a user that does not exist in TrueNAS <i>does not</i> automatically connect as the guest account. The <b>Connect As:</b> <i>Guest</i> option must be specifically chosen in MacOS to log in as the guest account. See the <a href=\"https://support.apple.com/guide/mac-help/connect-mac-shared-computers-servers-mchlp1140/\" target=\"_blank\">Apple documentation</a> for more details.":"",
"Proactive Support":"",
"Proactive support settings is not available.":"",
"Proceed":"",
...
...
@@ -3004,7 +3004,7 @@
"Select the user to control the dataset. Users created manually or imported from a directory service appear in the drop-down menu.":"",
"Select the user to run the rsync task. The user selected must have permissions to write to the specified directory on the remote host.":"",
"Select the value or enter a value between <i>0</i> and <i>1023</i>. Some initiators expect a value below <i>256</i>. Leave this field blank to automatically assign the next available ID.":"",
"Select when the command or script runs:<br> <i>Pre Init</i> is early in the boot process, after mounting filesystems and starting networking.<br> <i>Post Init</i> is at the end of the boot process, before FreeNAS services start.<br> <i>Shutdown</i> is during the system power off process.":"",
"Select when the command or script runs:<br> <i>Pre Init</i> is early in the boot process, after mounting filesystems and starting networking.<br> <i>Post Init</i> is at the end of the boot process, before TrueNAS services start.<br> <i>Shutdown</i> is during the system power off process.":"",
"Select which existing initiator group has access to the target.":"",
"Select {this} to include all {these} addresses. When this has been chosen, additional addresses cannot be selected.":"",
"Selecting a dataset to use with Minio <strong>removes all existing permissions for the dataset and any nested directories!</strong> Permissions are reset to minio:minio. To avoid dataset permissions conflicts, please create a separate, dedicated dataset for Minio.":"",
"Message verbosity level in the replication task log.":"",
"Metadata (Special) Small Block Size":"",
"Metadata VDEVs":"",
"Method of snapshot transfer:<ul> <li><i>SSH</i> is supported by most systems. It requires a previously created connection in <b>System > SSH Connections</b>.</li> <li><i>SSH+NETCAT</i> uses SSH to establish a connection to the destination system, then uses <a href=\"https://github.com/truenas/py-libzfs\" target=\"_blank\">py-libzfs</a> to send an unencrypted data stream for higher transfer speeds. This only works when replicating to a FreeNAS, TrueNAS, or other system with <i>py-libzfs</i> installed.</li> <li><i>LOCAL</i> efficiently replicates snapshots to another dataset on the same system without using the network.</li> <li><i>LEGACY</i> uses the legacy replication engine from FreeNAS 11.2 and earlier.</li></ul>":"",
"Method of snapshot transfer:<ul> <li><i>SSH</i> is supported by most systems. It requires a previously created connection in <b>System > SSH Connections</b>.</li> <li><i>SSH+NETCAT</i> uses SSH to establish a connection to the destination system, then uses <a href=\"https://github.com/truenas/py-libzfs\" target=\"_blank\">py-libzfs</a> to send an unencrypted data stream for higher transfer speeds. This only works when replicating to a TrueNAS, or other system with <i>py-libzfs</i> installed.</li> <li><i>LOCAL</i> efficiently replicates snapshots to another dataset on the same system without using the network.</li> <li><i>LEGACY</i> uses the legacy replication engine from FreeNAS 11.2 and earlier.</li></ul>":"",
"MiB":"",
"MiB. Units smaller than MiB are not allowed.":"",
"Microsoft Onedrive <a href=\"https://docs.microsoft.com/en-us/onedrive/developer/rest-api/getting-started/authentication\" target=\"_blank\">Access Token</a>. Log in to the Microsoft account to add an access token.":"",
...
...
@@ -1660,6 +1660,7 @@
"Pre Init":"",
"Preferred Trains":"",
"Preset":"",
"Privileges are the same as the guest account. Guest access is disabled by default in Windows 10 version 1709 and Windows Server version 1903. Additional client-side configuration is required to provide guest access to these clients.<br><br> <i>MacOS clients:</i> Attempting to connect as a user that does not exist in TrueNAS <i>does not</i> automatically connect as the guest account. The <b>Connect As:</b> <i>Guest</i> option must be specifically chosen in MacOS to log in as the guest account. See the <a href=\"https://support.apple.com/guide/mac-help/connect-mac-shared-computers-servers-mchlp1140/\" target=\"_blank\">Apple documentation</a> for more details.":"",
"Proactive support settings is not available.":"",
"Product":"",
"Production":"",
...
...
@@ -1868,6 +1869,7 @@
"Select the script. The script will be run using <a href=\"https://man7.org/linux/man-pages/man1/sh.1p.html\" target=\"_blank\">sh(1)</a>.":"",
"Select the system services that will be allowed to communicate externally.":"",
"Select the unused zvol or zvol snapshot. Select <i>Create New</i> to create a new zvol.":"",
"Select when the command or script runs:<br> <i>Pre Init</i> is early in the boot process, after mounting filesystems and starting networking.<br> <i>Post Init</i> is at the end of the boot process, before TrueNAS services start.<br> <i>Shutdown</i> is during the system power off process.":"",
"Select {this} to include all {these} addresses. When this has been chosen, additional addresses cannot be selected.":"",
"Self-Encrypting Drive":"",
"Semi-automatic (TrueNAS only)":"",
...
...
@@ -3547,7 +3549,6 @@
"Privacy Passphrase":"Datenschutz-Passphrase",
"Privacy Protocol":"Datenschutzprotokoll",
"Private Key":"Privat Schlüssel",
"Privileges are the same as the guest account. Guest access is disabled by default in Windows 10 version 1709 and Windows Server version 1903. Additional client-side configuration is required to provide guest access to these clients.<br><br> <i>MacOS clients:</i> Attempting to connect as a user that does not exist in FreeNAS <i>does not</i> automatically connect as the guest account. The <b>Connect As:</b> <i>Guest</i> option must be specifically chosen in MacOS to log in as the guest account. See the <a href=\"https://support.apple.com/guide/mac-help/connect-mac-shared-computers-servers-mchlp1140/\" target=\"_blank\">Apple documentation</a> for more details.":"Die Berechtigungen entsprechen denen des Gastkontos. Der Gastzugriff ist in Windows 10 Version 1709 und Windows Server Version 1903 standardmäßig deaktiviert. Für den Gastzugriff auf diese Clients ist eine zusätzliche clientseitige Konfiguration erforderlich..<br><br> <i>MacOS-Clients:</i> Versuch, Als Benutzer verbinden, der in FreeNAS nicht vorhanden ist <i>stellt keine</i> automatische Verbindung als Gastkonto her. Die Option <b>Verbinden als:</b> <i>Gast</i> muss in MacOS speziell ausgewählt werden, um sich als Gastkonto anzumelden. Weitere Informationen finden Sie in der <a href=\"https://support.apple.com/guide/mac-help/connect-mac-shared-computers-servers-mchlp1140/\" target=\"_blank\">Apple-Dokumentation</a>.",
"Proactive Support":"Proaktiver Support",
"Proceed":"Vorgehen",
"Proceed with Update":"Fahren Sie mit Update fort",
...
...
@@ -3793,7 +3794,6 @@
"Select the user to control the dataset. Users created manually or imported from a directory service appear in the drop-down menu.":"Wählen Sie den Benutzer aus, um das Dataset zu steuern. Benutzer, die manuell erstellt oder aus einem Verzeichnisdienst importiert wurden, werden im Dropdown-Menü angezeigt.",
"Select the user to run the rsync task. The user selected must have permissions to write to the specified directory on the remote host.":"Wählen Sie den Benutzer aus, der den rsync-Task ausführen soll. Der ausgewählte Benutzer muss über Berechtigungen zum Schreiben in das angegebene Verzeichnis auf dem Remotehost verfügen.",
"Select the value or enter a value between <i>0</i> and <i>1023</i>. Some initiators expect a value below <i>256</i>. Leave this field blank to automatically assign the next available ID.":"Wählen Sie den Wert aus, oder geben Sie einen Wert zwischen <i>0</i> und <i>1023</i> ein. Einige Initiatoren erwarten einen Wert unter </i>256<i>. Lassen Sie dieses Feld leer, um automatisch die nächste verfügbare ID zuzuweisen.",
"Select when the command or script runs:<br> <i>Pre Init</i> is early in the boot process, after mounting filesystems and starting networking.<br> <i>Post Init</i> is at the end of the boot process, before FreeNAS services start.<br> <i>Shutdown</i> is during the system power off process.":"Wählen Sie aus, wann der Befehl oder das Skript ausgeführt wird:<br> <i>Pre Init</i> ist nach dem Einhängen von Dateisystemen und dem Starten von networking.<br> <i>Post Init</i> befindet sich am Ende des Startvorgangs, bevor die FreeNAS-Dienste gestartet werden. <br><i>Herunterfahren</i> während des Systemausschaltvorgangs.",
"Select which existing initiator group has access to the target.":"Wählen Sie aus, welche vorhandene Initiatorgruppe Zugriff auf das Ziel hat.",
"Selecting a dataset to use with Minio <strong>removes all existing permissions for the dataset and any nested directories!</strong> Permissions are reset to minio:minio. To avoid dataset permissions conflicts, please create a separate, dedicated dataset for Minio.":"Wenn Sie ein Dataset auswählen, das mit Minio verwendet werden soll <strong>entfernt alle vorhandenen Berechtigungen für das Dataset und alle verschachtelten Verzeichnisse!</strong> Berechtigungen werden auf minio:minio zurückgesetzt. Um Konflikte mit Dataset-Berechtigungen zu vermeiden, erstellen Sie ein separates, dediziertes Dataset für Minio.",
"Method of snapshot transfer:<ul> <li><i>SSH</i> is supported by most systems. It requires a previously created connection in <b>System > SSH Connections</b>.</li> <li><i>SSH+NETCAT</i> uses SSH to establish a connection to the destination system, then uses <a href=\"https://github.com/truenas/py-libzfs\" target=\"_blank\">py-libzfs</a> to send an unencrypted data stream for higher transfer speeds. This only works when replicating to a FreeNAS, TrueNAS, or other system with <i>py-libzfs</i> installed.</li> <li><i>LOCAL</i> efficiently replicates snapshots to another dataset on the same system without using the network.</li> <li><i>LEGACY</i> uses the legacy replication engine from FreeNAS 11.2 and earlier.</li></ul>":"",
"Method of snapshot transfer:<ul> <li><i>SSH</i> is supported by most systems. It requires a previously created connection in <b>System > SSH Connections</b>.</li> <li><i>SSH+NETCAT</i> uses SSH to establish a connection to the destination system, then uses <a href=\"https://github.com/truenas/py-libzfs\" target=\"_blank\">py-libzfs</a> to send an unencrypted data stream for higher transfer speeds. This only works when replicating to a TrueNAS, or other system with <i>py-libzfs</i> installed.</li> <li><i>LOCAL</i> efficiently replicates snapshots to another dataset on the same system without using the network.</li> <li><i>LEGACY</i> uses the legacy replication engine from FreeNAS 11.2 and earlier.</li></ul>":"",
"Metrics":"",
"MiB":"",
"MiB. Units smaller than MiB are not allowed.":"",
...
...
@@ -2551,7 +2551,7 @@
"Privacy Passphrase":"",
"Privacy Protocol":"",
"Private Key":"",
"Privileges are the same as the guest account. Guest access is disabled by default in Windows 10 version 1709 and Windows Server version 1903. Additional client-side configuration is required to provide guest access to these clients.<br><br> <i>MacOS clients:</i> Attempting to connect as a user that does not exist in FreeNAS <i>does not</i> automatically connect as the guest account. The <b>Connect As:</b> <i>Guest</i> option must be specifically chosen in MacOS to log in as the guest account. See the <a href=\"https://support.apple.com/guide/mac-help/connect-mac-shared-computers-servers-mchlp1140/\" target=\"_blank\">Apple documentation</a> for more details.":"",
"Privileges are the same as the guest account. Guest access is disabled by default in Windows 10 version 1709 and Windows Server version 1903. Additional client-side configuration is required to provide guest access to these clients.<br><br> <i>MacOS clients:</i> Attempting to connect as a user that does not exist in TrueNAS <i>does not</i> automatically connect as the guest account. The <b>Connect As:</b> <i>Guest</i> option must be specifically chosen in MacOS to log in as the guest account. See the <a href=\"https://support.apple.com/guide/mac-help/connect-mac-shared-computers-servers-mchlp1140/\" target=\"_blank\">Apple documentation</a> for more details.":"",
"Proactive Support":"",
"Proactive support settings is not available.":"",
"Proceed":"",
...
...
@@ -3004,7 +3004,7 @@
"Select the user to control the dataset. Users created manually or imported from a directory service appear in the drop-down menu.":"",
"Select the user to run the rsync task. The user selected must have permissions to write to the specified directory on the remote host.":"",
"Select the value or enter a value between <i>0</i> and <i>1023</i>. Some initiators expect a value below <i>256</i>. Leave this field blank to automatically assign the next available ID.":"",
"Select when the command or script runs:<br> <i>Pre Init</i> is early in the boot process, after mounting filesystems and starting networking.<br> <i>Post Init</i> is at the end of the boot process, before FreeNAS services start.<br> <i>Shutdown</i> is during the system power off process.":"",
"Select when the command or script runs:<br> <i>Pre Init</i> is early in the boot process, after mounting filesystems and starting networking.<br> <i>Post Init</i> is at the end of the boot process, before TrueNAS services start.<br> <i>Shutdown</i> is during the system power off process.":"",
"Select which existing initiator group has access to the target.":"",
"Select {this} to include all {these} addresses. When this has been chosen, additional addresses cannot be selected.":"",
"Selecting a dataset to use with Minio <strong>removes all existing permissions for the dataset and any nested directories!</strong> Permissions are reset to minio:minio. To avoid dataset permissions conflicts, please create a separate, dedicated dataset for Minio.":"",
"Method of snapshot transfer:<ul> <li><i>SSH</i> is supported by most systems. It requires a previously created connection in <b>System > SSH Connections</b>.</li> <li><i>SSH+NETCAT</i> uses SSH to establish a connection to the destination system, then uses <a href=\"https://github.com/truenas/py-libzfs\" target=\"_blank\">py-libzfs</a> to send an unencrypted data stream for higher transfer speeds. This only works when replicating to a FreeNAS, TrueNAS, or other system with <i>py-libzfs</i> installed.</li> <li><i>LOCAL</i> efficiently replicates snapshots to another dataset on the same system without using the network.</li> <li><i>LEGACY</i> uses the legacy replication engine from FreeNAS 11.2 and earlier.</li></ul>":"",
"Method of snapshot transfer:<ul> <li><i>SSH</i> is supported by most systems. It requires a previously created connection in <b>System > SSH Connections</b>.</li> <li><i>SSH+NETCAT</i> uses SSH to establish a connection to the destination system, then uses <a href=\"https://github.com/truenas/py-libzfs\" target=\"_blank\">py-libzfs</a> to send an unencrypted data stream for higher transfer speeds. This only works when replicating to a TrueNAS, or other system with <i>py-libzfs</i> installed.</li> <li><i>LOCAL</i> efficiently replicates snapshots to another dataset on the same system without using the network.</li> <li><i>LEGACY</i> uses the legacy replication engine from FreeNAS 11.2 and earlier.</li></ul>":"",
"Metrics":"",
"MiB":"",
"MiB. Units smaller than MiB are not allowed.":"",
...
...
@@ -2551,7 +2551,7 @@
"Privacy Passphrase":"",
"Privacy Protocol":"",
"Private Key":"",
"Privileges are the same as the guest account. Guest access is disabled by default in Windows 10 version 1709 and Windows Server version 1903. Additional client-side configuration is required to provide guest access to these clients.<br><br> <i>MacOS clients:</i> Attempting to connect as a user that does not exist in FreeNAS <i>does not</i> automatically connect as the guest account. The <b>Connect As:</b> <i>Guest</i> option must be specifically chosen in MacOS to log in as the guest account. See the <a href=\"https://support.apple.com/guide/mac-help/connect-mac-shared-computers-servers-mchlp1140/\" target=\"_blank\">Apple documentation</a> for more details.":"",
"Privileges are the same as the guest account. Guest access is disabled by default in Windows 10 version 1709 and Windows Server version 1903. Additional client-side configuration is required to provide guest access to these clients.<br><br> <i>MacOS clients:</i> Attempting to connect as a user that does not exist in TrueNAS <i>does not</i> automatically connect as the guest account. The <b>Connect As:</b> <i>Guest</i> option must be specifically chosen in MacOS to log in as the guest account. See the <a href=\"https://support.apple.com/guide/mac-help/connect-mac-shared-computers-servers-mchlp1140/\" target=\"_blank\">Apple documentation</a> for more details.":"",
"Proactive Support":"",
"Proactive support settings is not available.":"",
"Proceed":"",
...
...
@@ -3004,7 +3004,7 @@
"Select the user to control the dataset. Users created manually or imported from a directory service appear in the drop-down menu.":"",
"Select the user to run the rsync task. The user selected must have permissions to write to the specified directory on the remote host.":"",
"Select the value or enter a value between <i>0</i> and <i>1023</i>. Some initiators expect a value below <i>256</i>. Leave this field blank to automatically assign the next available ID.":"",
"Select when the command or script runs:<br> <i>Pre Init</i> is early in the boot process, after mounting filesystems and starting networking.<br> <i>Post Init</i> is at the end of the boot process, before FreeNAS services start.<br> <i>Shutdown</i> is during the system power off process.":"",
"Select when the command or script runs:<br> <i>Pre Init</i> is early in the boot process, after mounting filesystems and starting networking.<br> <i>Post Init</i> is at the end of the boot process, before TrueNAS services start.<br> <i>Shutdown</i> is during the system power off process.":"",
"Select which existing initiator group has access to the target.":"",
"Select {this} to include all {these} addresses. When this has been chosen, additional addresses cannot be selected.":"",
"Selecting a dataset to use with Minio <strong>removes all existing permissions for the dataset and any nested directories!</strong> Permissions are reset to minio:minio. To avoid dataset permissions conflicts, please create a separate, dedicated dataset for Minio.":"",
"Method of snapshot transfer:<ul> <li><i>SSH</i> is supported by most systems. It requires a previously created connection in <b>System > SSH Connections</b>.</li> <li><i>SSH+NETCAT</i> uses SSH to establish a connection to the destination system, then uses <a href=\"https://github.com/truenas/py-libzfs\" target=\"_blank\">py-libzfs</a> to send an unencrypted data stream for higher transfer speeds. This only works when replicating to a FreeNAS, TrueNAS, or other system with <i>py-libzfs</i> installed.</li> <li><i>LOCAL</i> efficiently replicates snapshots to another dataset on the same system without using the network.</li> <li><i>LEGACY</i> uses the legacy replication engine from FreeNAS 11.2 and earlier.</li></ul>":"",
"Method of snapshot transfer:<ul> <li><i>SSH</i> is supported by most systems. It requires a previously created connection in <b>System > SSH Connections</b>.</li> <li><i>SSH+NETCAT</i> uses SSH to establish a connection to the destination system, then uses <a href=\"https://github.com/truenas/py-libzfs\" target=\"_blank\">py-libzfs</a> to send an unencrypted data stream for higher transfer speeds. This only works when replicating to a TrueNAS, or other system with <i>py-libzfs</i> installed.</li> <li><i>LOCAL</i> efficiently replicates snapshots to another dataset on the same system without using the network.</li> <li><i>LEGACY</i> uses the legacy replication engine from FreeNAS 11.2 and earlier.</li></ul>":"",
"Metrics":"",
"MiB":"",
"MiB. Units smaller than MiB are not allowed.":"",
...
...
@@ -2551,7 +2551,7 @@
"Privacy Passphrase":"",
"Privacy Protocol":"",
"Private Key":"",
"Privileges are the same as the guest account. Guest access is disabled by default in Windows 10 version 1709 and Windows Server version 1903. Additional client-side configuration is required to provide guest access to these clients.<br><br> <i>MacOS clients:</i> Attempting to connect as a user that does not exist in FreeNAS <i>does not</i> automatically connect as the guest account. The <b>Connect As:</b> <i>Guest</i> option must be specifically chosen in MacOS to log in as the guest account. See the <a href=\"https://support.apple.com/guide/mac-help/connect-mac-shared-computers-servers-mchlp1140/\" target=\"_blank\">Apple documentation</a> for more details.":"",
"Privileges are the same as the guest account. Guest access is disabled by default in Windows 10 version 1709 and Windows Server version 1903. Additional client-side configuration is required to provide guest access to these clients.<br><br> <i>MacOS clients:</i> Attempting to connect as a user that does not exist in TrueNAS <i>does not</i> automatically connect as the guest account. The <b>Connect As:</b> <i>Guest</i> option must be specifically chosen in MacOS to log in as the guest account. See the <a href=\"https://support.apple.com/guide/mac-help/connect-mac-shared-computers-servers-mchlp1140/\" target=\"_blank\">Apple documentation</a> for more details.":"",
"Proactive Support":"",
"Proactive support settings is not available.":"",
"Proceed":"",
...
...
@@ -3004,7 +3004,7 @@
"Select the user to control the dataset. Users created manually or imported from a directory service appear in the drop-down menu.":"",
"Select the user to run the rsync task. The user selected must have permissions to write to the specified directory on the remote host.":"",
"Select the value or enter a value between <i>0</i> and <i>1023</i>. Some initiators expect a value below <i>256</i>. Leave this field blank to automatically assign the next available ID.":"",
"Select when the command or script runs:<br> <i>Pre Init</i> is early in the boot process, after mounting filesystems and starting networking.<br> <i>Post Init</i> is at the end of the boot process, before FreeNAS services start.<br> <i>Shutdown</i> is during the system power off process.":"",
"Select when the command or script runs:<br> <i>Pre Init</i> is early in the boot process, after mounting filesystems and starting networking.<br> <i>Post Init</i> is at the end of the boot process, before TrueNAS services start.<br> <i>Shutdown</i> is during the system power off process.":"",
"Select which existing initiator group has access to the target.":"",
"Select {this} to include all {these} addresses. When this has been chosen, additional addresses cannot be selected.":"",
"Selecting a dataset to use with Minio <strong>removes all existing permissions for the dataset and any nested directories!</strong> Permissions are reset to minio:minio. To avoid dataset permissions conflicts, please create a separate, dedicated dataset for Minio.":"",